LG M2080D User manual

G
Order Number : GETEC-C1-10-203 FCC Part 15 subpart B
Test Report Number : GETEC-E3-10-103 Page 1 / 1
EUT Type: LED LCD TV/Monitor
FCC ID.: BEJM2780DFM
APPENDIX G
: USER’S MANUAL

www.lg.com
OWNER’S MANUAL
LED LCD MONITOR TV
LED LCD MONITOR TV MODELS
M2080D
M2280D
M2380D
M2780D
M2380DF
M2780DF
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH

CONTENTS
CONTENTS

PREPARATION
FRONT PANEL INFORMATION .............................. 4
BACK PANEL INFORMATION ................................. 5
STAND INSTALLATION
M2080D/M2280D/M2380D/M2780D ..... 6
M2380DF/M2780DF ........................................ 7
DETACHING STAND
M2080D/M2280D/M2380D/M2780D ..... 8
M2380DF/M2780DF ........................................ 9
DETACHING STAND BODY (Only M2080D/
M2280D/M2380D/M2780D) .............................. 10
WALL MOUNT: HORIZONTAL INSTALLATION............. 11
SWIVEL STAND(Only M2780D / M2780DF)............12
DESKTOP PEDESTAL INSTALLATION................12
POSITIONING YOUR DISPLAY ..............................13
LOCATION....................................................................13
KENSINGTON SECURITY SYSTEM ..................... 14
EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION ...................................... 15
HD RECEIVER SETUP
Connecting with a ComponentCable ............16
Connecting a Set-top Box with an HDMI
Cable .......................................................................17
Connecting with an HDMI to DVI Cable ...... 18
DVD SETUP
Connecting with a Component Cable...........19
Connecting with an HDMI Cable .................. 20
VCR SETUP
Connecting with an RF Cable..........................21
Connecting with an RCA Cable .................... 22
DIGITAL AUDIO OUT SETUP............................... 23
USB SETUP.................................................................24
HEADPHONE SETUP.............................................. 25
OTHER A/V SOURCE SETUP.............................. 26
PC SETUP
Connecting with a D-sub 15-pin Cable .......... 27
Connecting with an HDMI to DVI Cable..........28
Connecting with an HDMI to HDMI Cable ......... 29
BACK COVER WIRE ARRANGEMENT.............. 30
SUPPORTED DISPALY RESOLUTION.................31
WATCHING TV/CHANNEL CONTROL
REMOTE CONTROL KEY FUNCTIONS............. 33
TURNING ON THE TV ............................................ 35
CHANNEL SELECTION .......................................... 35
VOLUME ADJUSTMENT........................................ 35
INITIAL SETTING...................................................... 36
QUICK MENU.............................................................37
ON-SCREEN MENU SELECTION AND
ADJUSTMENT........................................................... 38
AUTO SCAN (AUTO TUNING)............................. 39
ADD/DELETE CHANNEL (MANUAL TUNING) ...... 40
CHANNEL EDITING...................................................41
CHANNEL LIST......................................................... 42
FAVORITE CHANNEL SETUP............................... 43
FAVORITE CHANNEL LIST.................................... 43
BRIEF INFORMATION............................................. 44
INPUT LIST................................................................. 45
PICTURE CONTROL
ASPECT RATIO SELECTION ................................ 46
PICTURE WIZARD ................................................... 48
䐤ENERGY SAVING............................................... 49
PRESET PICTURE SETTINGS
(PICTURE MODE) ............................................ 50
MANUAL PICTURE ADJUSTMENT
-USER MODE......................................................51
PICTURE IMPROVEMENT TECHNOLOGY ....... 52
EXPERT PICTURE CONTROL.............................. 53
PICTURE RESET....................................................... 56
SCREEN SETUP FOR PC MODE
Selecting Resolution.........................................57
Auto Configure (RGB-PC Mode Only) ...... 58
Adjustment for Screen Position, Size, Phase.........59
Screen Reset ..................................................... 60
SOUND CONTROL
AUTO VOLUME LEVELER (AUTO VOLUME) ....61
CLEAR VOICE II........................................................ 62
BALANCE ................................................................... 63
PRESET SOUND SETTINGS
-SOUND MODE ................................................. 64

CONTENTS

PRESET SOUND SETTINGS
-USER MODE ..................................................... 65
Surround X.................................................................. 65
AUDIO RESET ........................................................... 66
TV SPEAKERS ON/OFF SETUP...........................67
STEREO/SAP BROADCAST SETUP.................. 68
TIME SETTING
CLOCK SETUP
Auto Clock Setup..............................................69
Manual Clock Setup .........................................70
AUTO ON/OFF TIME SETTING..............................71
SLEEP TIMER SETTING ..........................................72
OPTIONAL SETTINGS
ON-SCREEN MENUS LANGUAGE SELECTION ........73
AUDIO LANGUAGE..................................................74
INPUT LABEL.............................................................75
KEY LOCK....................................................................76
CAPTION MODE
Analog Broadcasting System Captions...... 77
Digital Broadcasting System Captions........78
Caption Option...................................................79
POWER INDICATOR................................................ 80
DEMO MODE...............................................................81
PARENTAL CONTROL/RATINGS
PASSWORD & LOCK SYSTEM SETTINGS
Setting Up Your Password ............................. 82
Lock System ...................................................... 83
Set Password ..................................................... 84
CHANNEL BLOCKING............................................ 85
MOVIE & TV RATINGS
Movie RatingS (MPAA)
- For USA/MEXICO..................................... 86
TV Ratings Children
- For USA/MEXICO......................................87
TV Ratings General
- For USA/MEXICO..................................... 88
TV Ratings English - For CANADA ............ 89
TV Ratings French - For CANADA ............. 90
DOWNLOADABLE RATINGS..................................91
EXTERNAL INPUT BLOCKING ............................ 92
USING USB DEVICES
ENTRY MODES ......................................................... 93
PHOTO LIST............................................................... 95
MUSIC LIST................................................................ 99
MOVIE LIST ...............................................................102
DIVX REGISTRATION CODE................................ 107
DEACTIVATION ....................................................... 108
APPENDIX
TROUBLESHOOTING ............................................109
MAINTENANCE.........................................................112
PRODUCT SPECIFICATIONS
<M2080D> ........................................................113
<M2280D> ........................................................114
<M2380D/M2380DF> ..................................115
<M2780D/M2780DF> ...................................116
PROGRAMMING THE REMOTE CONTROL .... 117
PROGRAMMING CODES....................................... 117
IR CODES ...................................................................119
EXTERNAL CONTROL THROUGH RS-232C
RS-232C Setup ..............................................120
Type of Connector; D-Sub 9-pin Male .....120
Communication Parameters........................120
RS-232C Configurations............................... 121
Set ID ................................................................... 121


PREPARATION
PREPARATION
FRONT PANEL INFORMATION
ŶThis is a simplified representation of the front panel. The image shown may be somewhat different
from your set.
INPUT BUTTON
IR RECEIVER (remote control signal receiver)
WOOFER
M2080D / M2280D
M2380D / M2780D M2380DF / M2780DF
MENU BUTTON
ENTER BUTTON
VOLUME BUTTON
CHANNEL BUTTON
POWER BUTTON
POWER INDICATOR
Illuminates blue when the set is switched on.
Note: You can adjust the power indicator in the OPTION menu.
1
5
9
2
6
3
7
4
8
1 1 2
3 4 5 6 7 8 9


PREPARATION
BACK PANEL INFORMATION
ŶThis is a simplified representation of the back panel. The image shown may be somewhat different
from your set.
1
6 7 8 9 10 11
2 3 4 5
DC ADAPTER PORT
Connect to the power cord socket.
HDMI INPUT
Connect an HDMI signal to HDMI IN or a DVI
(VIDEO) signal to HDMI IN with a DVI to HDMI
cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equip-
ment with an optical audio cable.
RGB/DVI AUDIO INPUT
Connect the audio from a PC.
HEADPHONE SOCKET
Plug headphones into the headphone socket.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB INPUT (PC)
Connect the output from a PC.
USB INPUT
COMPONENT INPUT
Connect a component video/audio device to
these jacks.
AV(AUDIO/VIDEO) INPUT
Connect audio/video output from an external
device to these jacks.
ANTENNA / CABLE INPUT
Connect over-the-air signals to this jack.
1
5
6
7
8
9
10
11
2
3
4
M2080D / M2280D
M2380D / M2780D M2380DF / M2780DF


PREPARATION
PREPARATION
STAND INSTALLATION
ŶThe image shown may be somewhat different from your set.
Carefully place the product screen side down on a
cushioned surface that will protect the set and its
screen from damage.
Insert the Stand Base into the product.
Stand Base
Use a Coin on the bottom of the stand base
and turn the screw clockwise to tighten.
1
2
3
M2080D/M2280D/M2380D/M2780D
Coin


PREPARATION
STAND INSTALLATION
ŶThe image shown may be somewhat different from your set.
Carefully place the product screen side down on a
cushioned surface that will protect the set and its
screen from damage.
Insert the Stand Base into the product.
Use a Coin on the bottom of the stand base
and turn the screw clockwise to tighten.
1
2
3
M2380DF/M2780DF
Stand Base
Coin


PREPARATION
PREPARATION
DETACHING STAND
ŶThe image shown may be somewhat different from your set.
1
2
3
Place the set screen side down on a cushion
or soft cloth.
Detach the Stand Base from the set by turning the
screw to the left with a Coin.
Pull the stand base.
Stand Base
M2080D/M2280D/M2380D/M2780D
Coin


PREPARATION
DETACHING STAND
ŶThe image shown may be somewhat different from your set.
1
2
3
Place the set screen side down on a cushion
or soft cloth.
Detach the Stand Base from the set by turning the
screw to the left with a Coin.
Pull the stand base.
M2380DF/M2780DF
Stand Base
Coin


PREPARATION
PREPARATION
DETACHING STAND BODY (Only M2080D/M2280D/
M2380D/M2780D)
ŶThe image shown may be somewhat different from your set.
ŶRemove the stand body in the same way as the following when using it as a wall hook.
1. Remove the screw 2 points.
2. Pull the stand body.
3. Assemble the screw 2 points.
Screw


PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
ŶThe image shown may be somewhat different from your set.
For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instruc-
tions are available from your dealer. See the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
If you intend to mount the monitor TV to a wall, attach the wall mounting interface (optional) to the back of
the monitor TV. When you install the monitor TV using the wall mounting interface (optional), attach it care-
fully so it will not drop.
1. Be sure to use screws and a wall mount that meet VESA standards.
2. Using screws longer than those recommended might damage the monitor TV.
3. Using screws that do not meet VESA standards might either damage the monitor TV or result in it com-
ing away from the wall. LG is not responsible for any damage resulting from failure to follow these instruc-
tions.
4. "VESA compatible" refers to the screw mounting interface dimensions and mounting screw specifications.
5. Please use VESA standards as shown below.
5-1) 784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness: 2.6 mm
* Screw: ĭ4.0 mm x Pitch 0.7 mm x Length 10 mm
5-2) 787.4 mm (31.0 inch) and above
* Please use a VESA standard wall mount pad and screws.
< Screw Mounting Interface Dimensions >
 M2080D / M2280D / M2380D / M2380DF : 75 mm x 75 mm hole spacing
 M2780D / M2780DF : 100 mm x 200 mm hole spacing
10 cm
10 cm
10 cm
10 cm
10 cm
Wall Mount Pad


PREPARATION
PREPARATION
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 10 cm on each side and from the wall.
ŶThe image shown may be somewhat different from your set.
10 cm
10 cm 10 cm
10 cm
10 cm
10 cm 10 cm
10 cm
M2080D / M2280D
M2380D / M2780D
M2380DF / M2780DF
SWIVEL STAND(Only M2780D / M2780DF)
ŶThe image shown may be somewhat different from your set.
After installing the set, you can adjust the set manually to the left or right direction by 179 degrees to
suit your viewing position.
M2780D M2780DF


PREPARATION
POSITIONING YOUR DISPLAY
LOCATION
ŶThe image shown may be somewhat different from your set.
Adjust the position of the panel in various ways for maximum comfort.
* Tilt Range
-5° -5°10° 10°
ŶWhen adjusting the angle of the screen, do
not put your finger(s) in between the head of
the monitor and the stand body or woofer.
You can hurt your finger(s).
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not
to expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is placed in
a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
WARNING
M2380DF / M2780DF
M2080D / M2280D / M2380D / M2780D M2380DF / M2780DF


PREPARATION
PREPARATION
KENSINGTON SECURITY SYSTEM
- The product is equipped with a Kensington Security System connector on the back panel. Connect
the Kensington Security System cable as shown below.
- For detailed installation and use of the Kensington Security System, refer to the user’s guide provided
with the Kensington Security System.
- For further information, visit http://www.kensington.com. Kensington sells security systems for expen-
sive electronic equipment such as notebook PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the product feels cold to the touch, there may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with product.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor’s performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce temporary distortions on the screen.
M2080D / M2280D
M2380D / M2780D M2380DF / M2780DF


EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION
ŶTo prevent damage, do not connect the set to the a power outlet until all connections have been made
between the devices.
ŶFor optimum picture quality, adjust the antenna's direction.
ŶAn antenna cable and converter are not included with the SET.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF) Single-family Dwellings/Houses
(Connect to wall jack for outdoor antenna)
RF Coaxial Wire (75 Ω)
ŶTo get better picture quality in poor signal areas, install a signal amplifier to the antenna as shown
above.
ŶIf the signal needs to be split for two devices, use an antenna signal splitter.
EXTERNAL EQUIPMENT SETUP
Antenna
UHF
VHF
Signal
Amplifier


EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
HD RECEIVER SETUP
Connecting with a ComponentCable
ŶTo prevent damage, never plug in any power cords until you have finished connecting all equipment.
ŶThe image shown may be somewhat different from your set.
ŹHDMI Audio Supported formats: Dolby Digital, PCM
DTS Audio format is not supported.
Signal Component HDMI
480i / 576i YES No
480p / 576p YES YES
720p / 1080i YES YES
1080p YES
(50 Hz / 60Hz only)
YES
(24 Hz / 30 Hz / 50Hz / 60Hz)
Connect the video outputs (Y, PB, PR) of the digital
set-top box to the COMPONENT IN VIDEO jacks on
the set.
Connect the audio output of the digital set-top box
to the COMPONENT IN AUDIO jacks on the set.
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
Select COMPONENT input source using the INPUT
button on the remote control.
1
2
3
412


EXTERNAL EQUIPMENT SETUP
Connecting a Set-top Box with an HDMI Cable
Connect the digital set-top box to the HDMI/DVI IN 1
or HDMI/DVI IN 2 jack on the set.
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
Select HDMI 1 or HDMI 2 input source using the
INPUT button on the remote control.
1
2
3
NOTE
ŹCheck that your HDMI cable is a high speed HDMI cable. If the HDMI cables are not high speed,
flickering or no screen display can result.

1


EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connect the digital set-top box to the HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the set.
Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the
set.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select HDMI 1 or HDMI 2 using the INPUT on the remote control.
Connecting with an HDMI to DVI Cable
1
2
3
4
1 2


EXTERNAL EQUIPMENT SETUP
DVD SETUP
Connecting with a Component Cable
Connect the video outputs (Y, PB, PR) of the DVD
to the COMPONENT IN VIDEO jacks on the set.
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO jacks on the set.
Turn on the DVD player, insert a DVD.
Select Component using the INPUT on the remote
control.
Refer to the DVD player's manual for operating
instructions.
1
2
3
4
5
Component Input Ports
For better picture quality, connect a DVD player to the component input ports as shown below.
Component Ports on the set Y PBPR
Video output Ports
on the DVD player
YP
BPR
YP-YR-Y
YCbCr
YPbPr
12