LG 42PG100R User manual

PLASMA TV
OWNER’S MANUAL
32PC5***
42PG1***
50PG1***
42PG2***
50PG2***
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring service.
ENGLISH
This feature is not available for all models.
This product qualifies for ENERGY STAR in
the “factory default Home mode)” setting
and this is the setting in which power
savings will be achieved.
(Except for 32PC5***)

1
ACCESSORIES
ACCESSORIES
Ensure th t the following ccessories re included with your TV. If n ccessory is missing, ple se cont ct the
de ler where you purch sed the product.
Owner's
Manual
Owner’s manual
Owner’s Manual Batteries
MUTE
TEXT AV MODE
FAV
RATIO
INPUT
POWER
Q. MENU MENU
OK
123
456
78
0
9
LIST
Q.VIEW
PICTURE
RETURN
P
SOUND
?
i
OK
MENU Q.MENU
AVMODE
123
456
789
0
Q.VIEW LIST
INPUT
POWER
P
MUTE
FAV
*
RETURN
TEXT
?
i
*
P
A
G
E
Remote Control
or
OK
MENU Q.MENU
AV MOD E
123
456
789
0
Q.VIEW LIST
INPUT
POWER
PRVOL
MUTE
FAV
*
RETURN
TEXT
?
i
*
P
A
G
E
or
Power Cord
Polishing Cloth
Polishing cloth for use on the screen
This feature is not available
for all models.
*Lightly wipe any stains or fingerprints on the
surface of the TV with the polishing cloth.
Do not use excessive force. This may
cause scratching or discolouration.
( only 42/50PG1***)
Cable Holder
(42PG1***, 42PG2*** :1EA ,
50PG1***, 50PG2***
: 2EA )
Bolts for st nd ssembly
(Refer to P.9)
(42PG1***, 42PG2*** :4EA )
protection cover
only 42/50PG2***)
C ble M n gement Clip
Only 32PC5***
4-bolts for stand
assembly
Refer to p. 9
Holder
Refer to p.12)
Cover
Refer to p.12)
This feature is not available
for all models.
Ferrite Core
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Use of ferrite core (
This feature is not available for all models. )
Install the power plug closely.

PICTURE CONTROL
Picture ize (Aspect Ratio)Control .........................53
Preset Picture ettings
- Picture Mode-Preset............................................55
- Auto Colour Tone Control
(Cool/Medium/Warm) .............................................56
Manual Picture Adjustment
- Picture Mode-User Option................................57
- Colour Tone - User Option...............................58
-
Picture Improvement Technology ...................59
Advanced - Gamma .....................................................60
Advanced - Film Mode ................................................61
Advanced - Black(Darkness) Level...........................62
Picture Reset..................................................................63
Image ticking Minimization(I M) Method ..........64
Power aving Picture Mode .......................................65
Factory Reset.................................................................66
WATCHING TV /PROGRAMME CONTROL
Remote Control Key Functions..................................34
Turning on the TV....................................................... 38
Programme election ................................................. 38
Volume Adjustment......................................................38
Quick Menu .................................................................. 39
On creen Menus election and Adjustment ......40
Auto Programme Tuning ............................................ 41
Manual Programme Tuning ....................................... 42
Fine Tuning .....................................................................43
Assigning a tation Name..........................................44
Booster............................................................................45
Programme Edit ........................................................... 46
PICTURE CONTROL
WATCHING TV / PROGRAMME CONTROL
AACCCCEEOORRIIEE.....................................................1
2
CONTENTS
CONTENTS
PREPARATION
Front Panel Controls................................................. 4
Back Panel Information ............................................ 6
tand Installation....................................................... 9
Please set it up carefully so the product
does not fall over.
. . . . . . . . . . . . . . . . . . . . . . . . .10
Back Cover for Wire Arrangement................ 11~12
wivel tand...............................................................12
Not Using the Dest-Type tand ............................12
POWER CORD Arrangement..................................12
Desktop Pedestal Installation.................................13
Wall Mount: Horizontal installation..................... 14
Antenna Connection............................................... 15
PREPARATION
EXTERNAL EQUIPMENT SETUP
HD Receiver etup .......................................................16
DVD etup..................................................................... 19
VCR etup..................................................................... 23
Other A/V ource etup .......................................... 27
PC etup.........................................................................28
- creen etup for PC Mode ...............................30
Favourite Programme .................................................. 47
electing the Programme Table............................... 48
...................................................................49
Key lock.......................................................................... 51
AV Mode .........................................................................52

SOUND & LANGUAGE CONTROL
Auto Volume Leveler ....................................................67
Preset ound ettings - ound Mode....................68
ound etting Adjustment - User Mode ...............69
Balance ............................................................................70
TV peakers On/Off etup .......................................71
I/II
- tereo/Dual Reception....................................... 72
- NICAM Reception ....................................................... 73
- peaker ound Output election.................... 73
On- creen Menu Language / Country election ... 74
3
CONTENTS
APPENDIX
Troubleshooting............................................................82
Maintenance .................................................................84
Product pecifications ................................................85
IR Codes ....................................................................... 86
External Control Through R -232C ..................... 88
TIME SETTING
Clock etup....................................................................75
Auto On/Off Timer etting........................................76
leep Timer etting......................................................77
Auto hut-off etting...................................................78
TELETEXT
witch On/Off .............................................................79
IMPLE Text ...................................................................79
TOP Text.........................................................................80
FA TEXT.........................................................................80
pecial Teletext Functions..........................................81

4
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
■
This is a simplified representation of the front panel. Image shown may differ from your TV.
■
If your product has a protection film attached, remove the film and then wipe the product with a polishing
cloth.
42/50PG1***
MENU OK INPUT POWER
P
-+
OK
MENU
INPUT
VOLUME PROGRAMME
Remote Control Sensor
Power/St ndby Indic tor
• illuminates red in standby mode.
• illuminates green when the TV is switched on.
P
- +
OKOK
MENUMENU
INPUTINPUT

5
PREPARATION
PROGRAMME
VOLUME
MENU OK
INPUT
P
-+
OK
MENU
INPUT
P
-+
OK
MENU
INPUT
Remote Control Sensor
POWER Button
Power/St ndby Indic tor
• illuminates red in standby mode.
• illuminates green when the TV is
switched on.
P
- +
OK
OK
MENU
MENU
INPUT
INPUT
42/50PG2***
32PC5***
PR
VOL
OK
MENU
INPUT
Power/St ndby Indic tor
• illuminates red in standby mode.
• illuminates green when the TV is switched on.
Remote Control
Sensor
PR
VOL
OK
MENU
INPUT
INPUT MENU OK VOLUME PROGRAMMEPOWER
PR
VOL
OK
MENU
INPUT

6
PREPARATION
PREPARATION
HDMI/DVI IN
AUDIO
(RGB/DVI)
RGB (PC)
ANTENNA
IN
RS-232C IN
(CONTROL)
COMPONENT IN
VIDEO AUDIO
AV 1V 1 AV 2V 2
BACK PANEL INFORMATION
A
Image shown may differ from your TV.
AUDIO
AV
VIDEO
VARIABLE AUDIO OUT
1
2
567
34
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the pecifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
Euro Sc rt Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
RS-232C Input (CONTROL) Port
Connect the serial port of the control devices to
the R -232C jack.
Component Input
Connect a component video/audio device to this
jack.
Antenn Input
Connect RF antenna to this jack.
1
2
3
4
5
6
7
42/50PG1***

7
PREPARATION
AUDIO
(RGB/DVI)
RGB (PC)
ANTENNA
IN
RS-232C IN
(CONTROL)
COMPONENT IN
VIDEO AUDIO
AV 1V 1 AV 2V 2
HDMI INHDMI INHDMI/DVI INHDMI/DVI IN
1 2
AV 1 AV 2
HDMI INHDMI/DVI IN
12
AUDIO
AV
VIDEO
VARIABLE AUDIO OUT
1
S-Video Input
Connect -Video out from
an -VIDEO device.
Audio/Video Input
Connect audio/video out-
put from an external
device to these jacks.
2
567
34
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the pecifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
Euro Sc rt Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
RS-232C Input (CONTROL) Port
Connect the serial port of the control devices to
the R -232C jack.
Component Input
Connect a component video/audio device to this
jack.
Antenn Input
Connect RF antenna to this jack.
1
2
3
4
5
6
7
42/50PG2***

8
PREPARATION
PREPARATION
VIDEO
AUDIO
COMPONENT IN
HDMI INHDMI/DVI IN
12
RGB IN (PC)
ANTENNA
IN
1
2
VARIABLE
OUT
AUDIO IN
(RGB/DVI)
AV OUT AV IN
L/ MONO
R
AUDIO VIDEO
VIDEO
AUDIO
COMPONENT IN
HDMI INHDMI/DVI IN
12
RGB IN (PC)
ANTENNA
IN
1
2
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
AV OUT AV IN
L/ MONO
R
AUDIO
VARIABLE AUDIO OUT
VIDEO
7
Component Input
Connect a component video/audio device to this
jack.
RS-232C Input (CONTROL&SERVICE) Port
Connect the serial port of the control devices to
the R -232C jack.
Euro Sc rt Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
HDMI Input
Connect a HDMI signal to HDMI IN
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
Antenn Input
Connect RF antenna (UHF) to this jack.
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the pecifications page. Never
attempt to operate the TV on DC power.
1
2
3
4
5
6
7
VIDEO
AUDIO
COMPONENT IN
HDMI INHDMI/DVI IN
12
RGB IN (PC)
ANTENNA
IN
1
2
VARIABLE
OUT
AUDIO IN
(RGB/DVI)
AV OUT AV IN
L/MONO
R
AUDIO VIDEO
VIDEO
AUDIO
COMPONENTCOMPONENT IN
HDMI INHDMI/DVI IN
1 2
RGB IN (PC)RGB IN (PC)
ANTENNA
IN
RS-232C INRS-232C IN
(CONTROL(CONTROL & SER& SERVICE)VICE)
AUDIO INAUDIO IN
(RGB/DVI)(RGB/DVI)
AV 2V 2 AV 1V 1
1 2 3
4 65
Only 32PC5***
BACK PANEL INFORMATION
A
Image shown may differ from your TV.

9
PREPARATION
STAND INSTALLATION
(Only 42PG1***, 42PG2***, 32PC5***)
■
Image shown may differ from your TV
■
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, thep
roduct can tilt forward after the product installation.) If you tighten the bolt with excessive force, the boltcan
deviate from abrasion of the tightening part of the bolt.
Carefully place the TV screen side
down on a cushioned surface to
protect the screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the
holes in the back of the TV.
1
2
3
Only 32PC5***

10
PREPARATION
PREPARATION
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT
FALL OVER.
AYou should purch se necess ry components to fix the TV to the w ll on the m rket.
APosition the TV close to the w ll to void the possibility of it f lling when pushed.
AThe instructions shown below re s fer w y to set up the TV, which is to fix it to the w ll, voiding the
possibility of it f lling forw rds if pulled. This will prevent the TV from f lling forw rd nd c using injury.
This will lso prevent the TV from d m ge. Ensure th t children do not climb or h ng from the TV.
NOTE
!
G When moving the TV undo the cords first.
G Use pl tform or c binet string nd l rge enough to support the size nd weight of the TV.
G To use the TV s fely m ke sure th t the height of the br cket on the w ll nd on the TV is the s me.
3
1
2
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
ecure the wall brackets with bolts to the wall.
Ensure that both brackets are even.
3Use a strong cord to secure the TV.
ecure the cord in such a way that it becomes taught when the TV is in position.
2
1
2
1

11
PREPARATION
NOTE
!
GGDo not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
BACK COVER FOR WIRE ARRANGEMENT
■
Here shown may be somewhat different from your TV.
Connect the cables as necessary.
To connect additional equipment, see the
EExxtteerrnnaall EEqquuiippmmeenntt eettuuppsection.
1
Install the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPPas shown.
2Install the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPPas shown.
2
Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPPwith both hands and pull it upward.
How to remove the cable management clip
CABLE MANAGEMENT CLIP
* For the 42PG1*** model, press the center of the CABLE MANAGEMENT CLIP and then lift up it.
Fix the CCaabbllee
HHoollddeerras shown and
bundle the cables.
Connect the cables as necessary.
To connect additional equipment, see the
EExxtteerrnnaall EEqquuiippmmeenntt eettuuppsection.
1
42/50PG2*** 42/50PG1***
CABLE MANAGEMENT CLIP
Fix the CCaabbllee HHoollddeerras
shown and bundle the
cables.

12
PREPARATION
PREPARATION
PREPARATION
Swivel St nd
(Only 42/50PG2***)
After installing the TV, you can adjust the TV manually
to the left or right direction by 20 degrees to suit your
viewing position.
NOT USING THE DESK-TYPE STAND
Only 32PC5***
Arrange the cables as shown picture.
POWER CORD ARRANGEMENT ( Only 32PC5*** )
After connecting the power cord to the AC input
terminal, fix the power cord at the rear side Hole of
the TV by using the bracket for fixing the power
cord.
BACK COVER FOR WIRE ARRANGEMENT
When inst lling the w ll-mounted unit, use the protection cover for desk-type st nd inst ll tion.
or
Insert the PROTECTION COVER into the TV
until clicking sound.

13
PREPARATION
■The TV c n be inst lled in v rious w ys such s on w ll, or on desktop etc.
■The TV is designed to be mounted horizont lly.
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV .
4 inches
4 inches
4 inches
4 inches
Power Supply
Circuit breaker
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

14
PREPARATION
PREPARATION
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall
mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
4 inches
4 inches

15
PREPARATION
ANTENNA
IN
AV 1 AV 2
ANTENNA CONNECTION
■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.
■To prevent d m ge do not connect to the m ins outlet until ll connections re m de between the devices.
ANTENNA
IN
AV 1 AV 2
Multi-family Dwellings/Apartments
Connect to wall antenna socket)
Single-family Dwellings /Houses
Connect to wall jack for outdoor antenna)
Outdoor
Antenn
W ll
Antenn
Socket
RF Coaxial Wire 75 ohm)
Antenna
UHF
Signal
Amplifier
VHF
■In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
■If signal needs to be split for two TVs,use an antenna signal splitter for connection.
VIDEO
AUDIO
COMPONENT IN
HDMI INHDMI/DVI IN
12
RGB IN (PC)
ANTENNA
IN
1
2
VARIABLE
OUT
AUDIO IN
(RGB/DVI)
AV OU T AV IN
L/MONO
R
AUDIO VIDEO
VIDEO
AUDIO
COMPONENT IN
HDMI INHDMI/DVI IN
12
RGB IN (PC)
ANTENNA
IN
1
2
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
AV OUT AV IN
L/MONO
R
AUDIO
VARIABLE AUDIO OUT
VIDEO
AUDIO
AV
VIDEO
VARIABLE AUDIO OUT

16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
■To void d m ging ny equipment, never plug in ny power cords until you h ve finished connecting ll equipment.
■
Image shown may differ from your TV.
2C IN
TROL)
AUDIO
(RGB/DVI)
RGB (PC)
COMPONENT IN
VIDEO AUDIO
AV 1 AV 2
1 2
VIDEOVIDEO
AUDIO
COMPONENTCOMPONENT IN
HDMI INHDMI INHDMI/DVI INHDMI/DVI IN
1 2
AV 2 AV 1
RGB IN (PRGB IN (PC)
RS-232CRS-232C IN
(CONTROL&SER(CONTROL&SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA
IN
1 2
HD RECEIVER SETUP
Connecting with a component cable
Connect the video outputs (Y, PB, PR)of the digital TV
top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOOjacks on the
TV.
Connect the audio output of the digital set-top box to
the CCOOMMPPOONNEENNTT IINN AAUUDDIIOOjacks on the TV.
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
elect CCoommppoonneenntt input source using the IINNPPUUTT
button on the remote control.
2
3
4
1
ignal
480i/576i
480p/576p
720p/1080i
1080p
Component
Yes
Yes
Yes
Yes
(Only 50Hz, 60Hz)
HDMI1/DVI,
HDMI2(Only 42/50PG2***)
No
Yes
Yes
Yes
(24Hz, 30Hz, 50Hz, 60Hz)
Only 32PC5***

HDMI INHDMI INHDMI/DVI INHDMI/DVI IN
1 2
RS-232C IN
(CONTROL)
AUDIO
(RGB/DVI)
RGB (PC)
AAV 1 AV 2
1
VIDEO
AUDIO
COMPONENT IN
AV 2 AV 1
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA
IN
HDMI INHDMI/DVI IN
1 2
1
17
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
Connect the HDMI output of the digital set-top box to
the HHDDMMII//DDVVII IINN or HHDDMMII IINN22(Except
42/50PG1***)models jack on the TV.
elect HHDDMMII11//DDVVII or HHDDMMII22(Except 42/50PG1***)
input source using the IINNPPUUTTbutton on the remote
control.
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
2
3
1
GGTV can receive the video and audio signal simultane-
ously with using a HDMI cable.
GGIf the digital set-top box supports Auto HDMI function,
the output resolution of the source device will be auto-
matically TV to 1280x720p.
GGIf the digital set-top box player does not support Auto
HDMI, you need to TV the output resolution appropri-
ately.
To get the best picture quality, adjust the output resolu-
tion of the source device to 1280x720p.
NOTE
!
Only 32PC5***

18
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
HDMI INHDMI INHDMI/DVI INHDMI/DVI IN
1 2
AUDIO
(RGB/DVI)
RS-232C IN
(CONTROL)
RGB (PC)
AV 1V 1 AV 2V 2
VIDEO
AUDIO
COMPONENT IN
AV 2 AV 1
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA
IN
HDMI INHDMI/DVI IN
12
1
2
HDMI INHDMI/DVI IN
12
AV 1 AV 2
VIDEO
AUDIO
COMPONENT INCOMPONENT IN
AV 2V 2 AV 1V 1
RGB IN (PC)RGB IN (PC)
RS-232C IN
(CONTROL&SER(CONTROL&SERVICE)VICE)
AUDIO INAUDIO IN
(RGB/DVI)(RGB/DVI)
ANTENANTENNA
IN
HDMI INHDMI/DVI IN
1 2
1
2
Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN 11 jack on the TV.
Connect the audio output of the digital set-top box to the AAUUDDIIOO((RRGGBB//DDVVII)) jack on the TV.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
elect HHDDMMII11//DDVVII input source using the IINNPPUUTTbutton on the remote control.
2
3
4
1
Connecting with a HDMI to DVI cable
GGHDMI2 (Except 42/50PG1***)source does not support DVI source.
GG If the set-top has a DVI output and no HDMI output, a separated audio connection is necessary.
GGIf the set-top Box does not support Auto DVI, you need to set the output resolution appropriately.
NOTE
!
Only 32PC5***