LG 50PV450C User manual

iiiiiiiill_i_
PLAS
Please read this manual carefully before operating
your set and retain it for future reference.
42PT200 50PV400 42PT250U 42PT350C
5OPT200 60PV400 50PT250U 50PT350C
42PT330 50PV430 50PV550U 50PV450C
50PT330 60PV430 60PV550U 60PV450C
42PT350 50PV450
50PT350 60PV450
P/NO :SAC34173308 (1102-REV01) www.lg.com

WARNING /CAUTION
TO REDUCE THE RISK OF FIREAND ELECTRIC
RAIN OR MOISTURE,
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.
WARNING /CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
Class B digital device
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two condi-
tions: (1) This device may not cause (harmful)
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation (of the device).
Any changes or modifications not expresslyapproved
by the party responsible for compliance could void
the user's authority to operate the equipment.
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user's
authority to operate this product
2

SAFETYINSTRUCTIONS
IMPORTANT SAFETYINSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
O Do not use this apparatus near water.
O Clean only with soft dry cloth.
O Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
ODo not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers)that produce
heat.
0Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong, The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet. (Can differ by country)
OProtect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by
the manufacturer.
0Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus com-
bination to avoid injury from tip-over.
@
S3125A
O Unplug this apparatus during lighting storms
or when unused for long periods of time.
@Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
3

SAFETYINSTRUCTIONS
Never touch this apparatus or antenna during
a thunder or lighting storm.
®
®
0
When mounting a TV on the wall, make sure
not to install the TV by the hanging power and
signal cables on the back of the TV.
Do not allow an impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance
and has no additional outlets or branch
circuits. Check the specification page of this
owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.
O
O
O
@
WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product
near flammable objects such as gasoline or
candles or expose the TV to direct air
conditioning.
Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.
on shelves above the unit).
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC out-
let). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas
pipes.
Power
Supply
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
"As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if you turn offthis unit by SWITCH"
4

@ANTENNAS
Outdoor antenna grounding
(can differ by country) If an outdoor antenna
is installed, follow the precautions below. An
outdoor antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can
come in contact with such power lines or cir-
cuits as death or serious injury can occur.
Be sure the antenna system is grounded so as
to provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors, location of antenna dis-
charge unit, connection to grounding elec-
trodes and requirements for the grounding
electrode.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
Ground Clamp _ Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21 )
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
NEC: National Electrical Code
OCleaning
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.
Moving
Make sure the product is turned off,
unplugged and all cables have been removed. It
may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.
@
@
Ventilation
Install your TV where there is proper ventila-
tion. Do not install in a confined space such as
a bookcase. Do not cover the product with
cloth or other materials (e.g.) plastic while
plugged in. Do not install in excessively dusty
places.
Take care not to touch the ventilation open-
ings. When watching the TV for a long period,
the ventilation openings may become hot. This
does not affect the performance of the product
or cause defects in the proudct.
t_ If smell smoke or other odors coming from
you
the TV or hearstrange sounds,unplug the power
cord contact an authorized service center.
@Do not press strongly upon the panel with
hand or sharp object such as nail, pencil or
pen, or make a scratch on it. Do not allow a
impact shock onto the panel.
Keep the product from direct sunlight.
away
Dot Defect
The Plasma or LCD panel is a high technology
product with resolution of two million to six
million pixels. In a very few cases, you could see
fine dots on the screen while you'reviewing the
TV. Those dots are deactivated pixels and do
not affect the performance and reliability of the
TV.
Generated Sound
"Cracking" noise: A cracking noise that occurs
when watching or turning off the TV is gener-
ated by plastic thermal contraction due to
temperature and humidity. This noise is com-
mon for products where thermal deformation
is required.
Electrical circuit humming/panel buzzing: A low
level noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depending on the product.This generat-
ed sound does not affect the performance and
reliability of the product.
S

CONTENTS
WARNING /CAUTION ............................ 2
SAFETY INSTRUCTIONS ..........................3
FEATURE OF THIS TV ...............................8
¸¸
Accessories ...................................................... 9
Front Panel Information ................................... 10
Back Panel Information ..................................... 11
Stand Instruction ............................................. 13
Cable Management ......................................... 15
Desktop Pedestal Installation ............................ 16
Swivel Stand .................................................... 16
VESAWall Mounting ........................................ 17
Securing the TV to the wall to prevent falling
when the TV is used on a stand ........................ 18
Antenna or Cable Connection .......................... 19
HD ReceiverSetup ......................................... 20
DVD Setup ..................................................... 23
VCR Setup ..................................................... 25
Other A/V Source Setup ................................. 26
USB Connection ............................................. 26
Audio Out Connection ................................... 27
PC Setup ........................................................ 28
Remote Control Functions ............................... 34
Turning On TV ................................................ 36
Channel Selection ........................................... 36
Volume Adjustment ......................................... 36
Initial Setting .................................................. 37
On-Screen Menus Selection ............................. 38
Quick Menu ................................................... 39
Channel Setup
- Auto Scan (Auto Tuning) ........................... 40
- Add /Delete Channel (Manual Tuning) ...... 41
- Channel Editing ........................................ 42
Channel List .................................................... 43
FavoriteChannel Setup .................................... 44
FavoriteChannel List ....................................... 45
Brief Information ............................................. 46
Input List ........................................................ 47
Input Label ..................................................... 48
AV Mode ........................................................ 49
SIMPLINK ....................................................... 50
Entry Modes ................................................... 52
Photo List ....................................................... 53
Music List ....................................................... 59
Movie List ....................................................... 62
DivX Registration Code ................................... 68
Deactivation ................................................... 69
Picture Size (Aspect Ratio) Control .................. 70
Picture Wizard ................................................. 72
Energy Saving ............................................ 74
Preset Picture Settings(Picture Mode) .............. 75
Manual Picture Adjustment - User Mode .......... 76
Picture Improvement Technology ..................... 77
Expert Picture Control ..................................... 78
Picture Reset ................................................. 80
Demo Mode .................................................. 80
Image Sticking Minimization (ISM) Method ....... 81
6

Auto Volume Leveler(Auto Volume) ................. 82
Clear Voice II .................................................. 83
Preset Sound Settings (Sound Mode) .............. 84
Sound Setting Adjustment - User Mode ........... 85
Infinite Surround ............................................. 86
Balance .......................................................... 87
TV Speakers On/Off Setup .............................. 88
Audio Reset .................................................... 89
Stereo/SAP Broadcast Setup ........................... 90
Audio Language .............................................. 91
On-Screen Menus Language Selection ............. 92
Caption Mode
- Analog Broadcasting System Captions ....... 93
- Digital Broadcasting System Captions ........ 94
- Caption Option ........................................ 95
Troubleshooting ............................................. 112
Maintenance .................................................. 114
Product Specifications .................................... 114
IR Codes ........................................................ 116
External Control Through RS-232C ................. 118
Clock Setting
- Auto Clock Setup ..................................... 96
- Manual Clock Setup .................................. 97
Auto On/Off Time Setting ............................... 98
Sleep Timer Setting ......................................... 99
Set Password& Lock System ......................... 100
Channel Blocking ........................................... 103
Movie & TV Rating ........................................ 104
Downloadable Rating..................................... 109
External Input Blocking ................................... 110
Key lock ......................................................... 111
7

FEATURE OF THIS TV
=This feature is not available for all models.
MODE
CLEAR
iiiiii_ _iili iiiitH}i_ iiiiiJi _iiii
VOICE II
IT] DOLBY
DIGITAL 1
High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.
This TV contains the detailed calibrations necessary
for professional certification by the Imaging Science
Foundation. The resulting ISF "day" and "night" modes
will then be accessible by the user to experience the
best their LG HDTV has to offer.
Sophisticated and detailed calibrations can be made
through the ISFccc mode.
Detailed calibration requires a licensed technician.
Please contact your local dealer to inquire about an
ISF certified technician.
AV Mode is three preset picture and audio settings. It
allows the viewer to quickly switch between common
settings. It includes Cinema, Sports, and Game Modes.
Automatically enhances and amplifies the sound of
human voice frequency range to help keep dialogue
audible when background noise swells.
Displays HDTV programs in full 1920 x I080p resolu-
tion for a more detailed picture.
View videos and photos and listen to music on your
TV through USB 2.0 (Mdeos' dependent on model).
Manufactured under license from Dolby Laboratories.
"Dolby "and the double-D symbol are trademarks of
Dolby Laboratories.
Hi31TIr"
INTELLII3ENT__
DIVX .
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC"
Unlike other sensors which can only sense brightness
of ambient light, LG's "Intelligent Sensor" uses 4,096
sensing steps to evaluate its surroundings. Using a
sophisticated algorithm, the LG processes picture
quality elements including brightness, contrast, color,
sharpness and white balance. The result is a picture
optimized for it's surroundings, more pleasing to
watch and which can also savne up to 50% in power
consumption.
ABOUT DIVX VIDEO: DivX® is a digital video for-
mat created by DivX, Inc. This is an official DivX
Certified® device that plays DivX video. Visit
www.divx.com for more information and software
tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to com-
plete your registration.
"DivX Certified® to play DivX® video, including
premium content"
DivX®, DivX Certified® and associated logos are
trademarks of DivX, Inc. and are used under license.
Covered by one or more of the following U.S.
patents :
Z295,673; Z460,668; Z515,710; Z519,274
8

PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
The accessories included may differ from the images below.
Owner's Manual CD Manual Protection Cover and Tape
(Refer to R14) Power Cord Ferrite Core (Depending on model)
m
0
z
(For 42/50PT200,42/50PTSSO, 42/50PT350,
42/50PTS50C, 42/50PT250U, 50PV400,
50PV430,50PV450,50PV450C, 50PV550U)
x4 x3
M4x26 M5x14.5
Screwsfor stand assembly
(Refer to R13, 14)
Polishing Cloth
(Not included with all models)
(For 60PV400, 60PV430, 60PV450,
60PV450C, 60PV550U)
x4 x3
M4x28 M5x24
Screws for stand assembly
(Refer to R13, 14)
* Wipe spots on the exterior only with
the polishing cloth.
* Do not wipe roughly when removing
spots. Excessive pressure may cause
scratch or discoloration.
Power Cord Holder
Remote Control,
Batteries (AAA) Cable HoMer
When using the VGA (D-sub 15 pin cable)
PC connection, the user must use shielded
signal interface cables with ferrite cores to
maintain standards compliance.
D-sub 15 pin Cable
How to use the Ferrite Core
1. Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
[to an External device] [to the TV]
[Figure I]
2. Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV,
[to a wall plug] [to the TV]
[Cross Section of
Ferrite Core]
[Cross Section of
Ferrite Core]
[Figure 2]
3. Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to a wall plug] [to the TV] _:_\
_>:'S
[Figure 3] [Cross Section of
Ferrite Core]
- If there is one ferrite core, follow as shown in Figure 1.
- If there are two ferrite cores, follow as shown in Figures I and 2.
- If there are three ferrite cores, follow as shown in Figures I and 3. 9

PREPARATION
FRONTPANELINFORMATION
Image shown may differ from your TV.
-O
_o
m
_o
O
z
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV
remains on.
POWER INPUT HOME ENTER VOLUME
Button Button Button Button Buttons CHANNEL Buttons
You can operate the buttons just by touching them lightly with your finger.
10

BACKPANELINFORMATION
Image shown may differ from your TV.
(For 42/50PT250U, 42/50PT350,
42/50PT350C, 50/60PV450,
50/60PV450C, 50/60PV550U)
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_i_:_ii_iiiiii_:_N!_!i!_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii%ii'ii!i!i:i::_:i!i:!i_
Im
_ililililililililili_ii!i_i)
(For42/50PT200,42/50PT330,
50/60PV400,50/60PV430)
) @
,i_ I......
_o
m
©
z
11

PREPARATION
-O
_o
m
_o
©
z
@
@
@
@
HDMI/DVI IN
Digital Connection. Supports HD video and
Digital audio. Doesn't support 480i.
Accepts DVI video using an adapter or HDMI to
DVI cable (not included)
OPTICAL DIGITAL AUDIO OUT
Optical digital audio output for use with amps and
home theater systems.
Note: In standby mode, this port doesn't work.
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.
AUDIO IN (RGB/DVI)
I/8" headphone jack for analog PC audio input.
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).
REMOTE CONTROL IN PORT
Fora wired remote control.
@
@
@
@
@
@
COMPONENT IN
Analog Connection. Supports HD.
Uses a red, green, and blue cable for video & red
and white for audio.
AV (Audio/Video) IN
Analog composite connection. Supports standard
definition video only (480i).
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
USB IN
Used for viewing photos, waching movies and lis-
tening to MP3s.
SERVICE ONLY
Used for software updates.
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
12

STAND INSTRUCTION
Image shown may differ from your TV.
Installation
O Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
_D
m
_D
©
z
O Assemble the parts of the Stand Body with the
Stand Base of the TV. Stand Body
x3
MSx24
(For 60PV400, 60PV450, 60PV450,
60PV450C, 60PV550U)
O Assemble the TV as shown.
x3
Stand Base
M5x14.5
(For 42/50PT200, 42/50PT330, 42/50PT350,
42/50PT350C, 42/50PT250U, 50PV400,
50PV430,50PV450,50PV450C,50PV550U)
O Fixthe 4 screws securely using the holes in the
back of the TV.
x4 x4
M4x28
(For 60PV400, 60PV430, 60PV450,
60PV450C, 60PV550U)
M4x26
(For42/50PT200,42/50PT330,42/50PT350,
42/50PT350C,42/50PT250U, 50PV400,
50PV430,50PV450,50PV450C, 50PV550U)
13

PREPARATION
m
©
z
Detachment
O Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
O Loose the screws from TV.
x4 x4
M4x28
(For 60PV400, 60PV430,
60PV450, 60PV450C, 60PV550U)
M4x26
(For42/50PT200,42/50PT330,42/50PT350,
42/50PT350C,42/50PT250U, 50PV400,
50PV430,50PV450,50PV450C,50PV550U)
Detach the stand from TV.
Attach the protection
cover tape.
O After removing the stand, install the included
PROTECTION COVER over the hole for
the stand.
Attach the protection cover tape.
When installing the wall mounting bracket, use
the PROTECTION COVER.
PROTECTION COVER
Fix a Guide to the Outsides.
14

CABLEMANAGEMENT
Image shown may differ from your TV.
Install the power cord holder and power cord.
It will help prevent the power cable from being removed by accident.
O Gather and bind the cables with the cable holder.
"O
_o
m
_o
©
z
POWER CORD CABLE HOLDER
HOLDER
15

PREPARATION
DESKTOP PEDESTALINSTALLATION
_D
l'rl
_D
©
z
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
4 inches
4inches 4 inches 4 inches
SWIVELSTAND
This feature is not available for all models.
After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your
viewing position.
"........._ .........." --
16

VESAWALLMOUNTING
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
"O
_o
m
_o
©
z
400 • 400 M6 4
PSW400B,
PSW400BG,
DSW400BG
600 • 400 M8 PSW600B,
PSW600BG
17

PREPARATION
SECURING THE TV TO THE WALLTO PREVENTFALLING
WHEN THE TV IS USEDON A STAND
"O
I'tl
©
z
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don't climb on or hang from the TV.
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (sold separately) to tie the product. It is safer to tie
the rope so it becomes horizontal between the wall and the product.
18

To prevent damage do not connect to the power outlet until all connections are made between the devices.
ANTENNA OR CABLECONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connection.
For optimum picture quality, adjust antenna direction if needed.
Wall
Antenna
Socket
=_
m
©
z
2. Cable Be careful not to bend the copper wire
when connecting the antenna.
Cable TV
Wall Jack ii_
_F Coaxial Wire (75 £_) !N
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV's, install a 2-Way Signal Splitter.
If the antenna is not installed properly, contact your dealer for assistance.
19

EXTERNAL EQUIPMENT SETUP
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
Image shown may differ from your TV.
HD RECEIVERSETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do
receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
m
x
z
>
X:)
c
z
--4
c
Component Connection
1. How to connect
OConnect the video outputs (Y, PB, PR) of the digital set-
top box to the COMPONENT IN VIDEO 1 jacks on
the TV. Match the jack colors (Y = green, PB= blue, and
PR = red).
O onnect the audio output of the digital set-top box to
the COMPONENT IN AUDIO 1 jacks on the TV.
2. How to use
mTurn on the digital set-top box.
(Referto the owner'smanualfor the digital set-topbox.operation)
Select the Component1 input source on the TV using the
INPUT button on the remote control.
If connected to COMPONENT IN 2 input, select the
Component2 input source on the TV.
Supported Resolutions Y, CB/PB,CR/PR
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
15.73 59.94
15.73 60.00
44.96 59.94
45.00 60.00
33.72 59.94
33.75 60.00
2Z00 24.00
33.75 30.00
6Z432 59.939
6Z50 60.00
26.97 23.94
33.71 29.97
2O