LG SH3C Specification sheet

SIMPLE MANUAL
Wireless
Sound Bar
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
SH3C
www.lg.com
ENGLISH
MODEL
*MFL69504947*
SH3B.DCANLLC_SIM_ENG_4947.indd 1 2017-01-13 �� 1:41:16

Front Panel
Rear Panel
·································· Standby/ON
······························ Selects Function
··························Adjusts Volume
PORT.IN ·············· Connect to a Portable device
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
Subwoofer Connection1
Place the wireless subwoofer near the sound bar and
follow steps below.
aConnect the power cord of wireless
subwoofer to the outlet.
bTurn on the sound bar :
The sound bar and wireless subwoofer will
be automatically connected. The subwoofer's
yellow - green LED turns on.
Subwoofer Connection Manually
aReset the subwoofer
If the yellow - green LED on the subwoofer
blinks quickly, skip this step and go to b
yPress and hold PAIRING button for 5 seconds.
yThe LED lights up alternately in red and yellow
- green.
yPlug out the power cord. After the LED turns
off completely, plug in the power cord again.
When the reset is completed, the subwoofer's
yellow - green LED blinks quickly.
bReset the sound bar
yAdjust volume to minimum until the red LED
on the sound bar lights up for a while.
yPress and hold (Mute) button on the remote
control for 3 seconds.
yThe red LED on the sound bar blinks quickly.
yTurn the sound bar’s power off and on while
the subwoofer’s yellow - green LED blinks.
When the connection is completed, you can see the
yellow - green LED on the subwoofer.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.
!P
SH3B.DCANLLC_SIM_ENG_4947.indd 2 2017-01-13 �� 1:41:18

ASC/STANDARD/CINEMA : Selects sound effect.
DRC ON/OFF : Makes comfortable sound at Dolby Digital.
WOOFER LEVEL+/- : Adjusts the volume level of subwoofer.
AUTO POWER ON/OFF : Automatically turns on by an input
source.
Replacement of battery
Remote control
Additional Information
TV Connection2
TV
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top
Box, Player
etc.)
bSet the input source by pressing Fon the
remote control or unit repeatedly.
Specication
Power requirements Refer to the main label.
Power
consumption Refer to the main label.
Dimensions
(W x H x D)
Approx.
950 mm x 71 mm x 47 mm
(37.4 inch x 2.8 inch x 1.9 inch)
Net Weight Approx. 2.47 kg (5.4 lb)
Amplier
(Total RMS
Output power)
300 W
Design and specications are subject to change without
notice.
SH3B.DCANLLC_SIM_ENG_4947.indd 3 2017-01-13 �� 1:41:18

LG Customer Information Center
Centre d’information à la clientèle de LG
1-888-542-2623 CANADA
Register your product Online!
Enregistrez votre produit en ligne!
www.lg.com
Industry Canada Statement
This device complies with Industry Canada’s licence-
exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
(i) the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
(ii) for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the band
5725-5850 MHz shall be such that the equipment
still complies with the e.i.r.p. limits specied for
point-to-point and non-point-to-point operation as
appropriate; and
(iv) the worst-case tilt angle(s) necessary to remain
compliant with the e.i.r.p. elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated.
(devices operating in the band 5250-5350 MHz
with a maximum e.i.r.p. greater than 200 mW)
(v) High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
SH3B.DCANLLC_SIM_ENG_4947.indd 4 2017-01-13 �� 1:41:18