LG CM2440DAB User manual

www.lg.com
Please read this manual carefully before operating
your set and retain it for future reference.
CM2440DAB (CM2440DAB, CMS2440F)
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO INNER PAGE OF BACK COVER.
OWNER’S MANUAL
Micro Hi-Fi
System
ENGLISH
CM2440-BB_AGBRLLK_ENG_7046.indd 1 2014-07-23  9:43:53

1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sucient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
CM2440-BB_AGBRLLK_ENG_7046.indd 2 2014-07-23  9:43:53

Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2. All electrical and electronic
products should be disposed of
separately from the municipal
waste stream via designated
collection facilities appointed
by the government or the local
authorities.
3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4. For more detailed information
about disposal of your old
appliance, please contact your city
office, waste disposal service or
the shop where you purchased the
product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
CM2440-BB_AGBRLLK_ENG_7046.indd 3 2014-07-23  9:43:53

Getting Started4
Getting Started
1LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Please contact to the followingaddress for
obtaining a copy of the DoC (Declaration of
Conformity).
Contact oce for compliance of this product:
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
yPlease note that this is NOT a Customer
Service contact point. For Customer Service
Information, see Warranty Card or contact the
dealer that you purchased this product.
In door use only.
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.
POWER: This unit operates on a mains supply
of 200 - 240V ~, 50/60Hz.
WIRING: This unit is supplied with a BS 1363
approved main plug. When replacing the
fuse, always use of the same rating approved
to BS 1362. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse
cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in
your home, then the plug should be removed
and a suitable type tted. Please refer to the
wiring instructions below:
WARNING: A mains plug removed from the
mains lead of this unit must be destroyed. A
mains plug with bared wires is hazardous if
inserted in a mains socket. Do not connect
either wire to the earth pin, marked with the
letter E or with the earth symbol or coloured
green or green and yellow. If any other plug is
tted, use same rating of fuse in the plug.
IMPORTANT: The wires in this mains lead are
coloured in accordance with the following
codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the
colours of the wires in the mains lead of this
unit may not correspond with the coloured
marking identifying the terminals in your plug,
proceed as follows: The wire which is coloured
blue must be connected to the terminal which
is marked with the letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
CM2440-BB_AGBRLLK_ENG_7046.indd 4 2014-07-23  9:43:54

Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique Features
6 Accessories
6 Playable file Requirement
6 – Music file requirement
7 – Compatible USB Devices
7 – USB device requirement
8 Remote control
9 Front panel
10 Back panel
2 Connecting
11 Connecting the speakers to the unit
11 – Attaching the speakers to the unit
11 Antenna Connection
12 Optional Equipment Connection
12 – USB Connection
12 – PORT. IN Connection
3 Operating
13 Basic Operations
13 – CD/ USB Operations
14 – Selecting a folder
14 – Deleting an MP3/WMA/FLAC file
15 – Android device Operation
16 Radio Operations
16 – Listening to the radio
17 – Presetting the Radio Stations
17 – Deleting all the saved stations
17 – Improving poor FM reception
17 – Seeing information about a Radio
station(Optional)
18 – Listening to the DAB
18 – Aligning the service names
18 – DAB scan
18 – Deleting all of the saved DAB scan
stations
19 Other Operations
19 – Programmed Playback
19 – Displaying file information (ID3 TAG)
19 – Turn off the sound temporarily
19 – Auto Power Down
20 Sound adjustment
20 – Setting the surround mode
20 Setting the Clock
20 – Setting the clock through
"LG Bluetooth Remote" App
21 – Setting the alarm
21 Sleep Timer Setting
21 Dimmer
22 Advanced Operations
22 – Recording to USB
22 – To select recording bit rate and speed
23 Using Bluetooth technology
24 – Listening to music stored on the
Bluetooth devices
25 – Using Bluetooth App
4 Troubleshooting
26 Troubleshooting
5 Appendix
27 Specifications
28 Maintenance
28 – Handling the Unit
28 – Notes on Discs
28 Trademarks and Licenses
6 Warranty
29 Warranty
CM2440-BB_AGBRLLK_ENG_7046.indd 5 2014-07-23  9:43:54

Getting Started6
Getting Started
1
Unique Features
USB Direct Recording
Records music to your USB device.
Portable In
Listens to music from your portable device.
(MP3, Notebook, etc)
Bluetooth
Listens to music stored on your bluetoothe device.
LG Bluetooth Remote
You can control this unit with your Android device
via Bluetooth. This unit and your device must be
paired for Bluetooth. Visit“Google Android Market
(Google Play Store)”to search for “LG Bluetooth
Remote”app. For detailed information, refer to page
25
Accessories
Please check and identify the supplied accessories.
Remote Control (1) Battery (2)
Antenna (1)
Playable file
Requirement
Music file requirement
MP3/ WMA/FLAC le compatibility with this unit is
limited as follows :
ySampling frequency :
MP3 : within 8 to 48 kHz
WMA : within 8 to 48 kHz
FLAC : within 8 to 96 kHz(USB),
within 8 to 48 kHz(CD)
yBit rate : within 8 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yMaximum les : Under 999
yFile extensions : “.mp3”/ “.wma”/”.ac”
yCD-ROM le format : ISO9660/ JOLIET
ySupport channel(FLAC) : Up to 2 channel
ySupport output bit/sample (FLAC) : 16bit
ybps(FLAC) : Up to 2.5Mbps
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players. (Mastered/ Live File System :
Disc format system for Windows Vista)
CM2440-BB_AGBRLLK_ENG_7046.indd 6 2014-07-23  9:43:54

Getting Started 7
Getting Started
1
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive :
Devices that support USB2.0 or USB1.1.
yThe USB function of this unit does not
support all USB devices.
USB device requirement
yDevices which require additional program
installation when you have connected it to a
computer, are not supported.
yDo not extract the USB device while in
operation.
yFor a large capacity USB, it may take longer
than a few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub,
the USB device is not recognized.
yUsing NTFS le system is not supported.
(Only FAT(16/ 32) le system is supported.)
yThis unit is not supported when the total
number of les is 1,000 or more.
yExternal HDD, Card readers, Locked devices,
or hard type USB devices are not supported.
yUSB port of the unit cannot be connected
to PC. The unit cannot be used as a storage
device.
ySome USB may not work with this unit.
yIn power on state, you can charge your
Android device via USB port. (This is available
when you select USB function.)
CM2440-BB_AGBRLLK_ENG_7046.indd 7 2014-07-23  9:43:54

Getting Started8
Getting Started
1
Battery Installation
Remove the battery cover on the
rear of the Remote Control, and
insert two (size AAA) batteries
with 4and 5matched correctly.
• • • • • • a • • • • • •
1: Switches the unit ON or OFF.
B : Opens or closes the disc tray.
• • • • • • b • • • • • •
PRESETFOLDER W/S:
- Searches for a folder of MP3/
WMA/FLAC les. When a CD/ USB
containing MP3/ WMA /FLAC les
in several folders is being played,
press PRESETFOLDER W/S to
select the folder you want to play.
- Chooses a preset number for a
radio station.
FUNCTION : Selects the function
and input source.
: Mutes the sound.
VOL o/p: Adjusts speaker
volume.
PROGRAM/MEMORY :
- Stores radio stations.
- Creates a playlist you want to
listen to.
SOUND EFFECT :Chooses sound
impressions.
INFO : Sees informations about
your music. MP3 les often come
with ID3 tags. The tag gives
the Title, Artist, Album or Time
information.
• • • • • • c • • • • • •
REPEAT(MENU) : Listens to
your tracks/les repeatedly or
randomly.
C/V(Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a
track/le.
TUN. -/+ :
- Selects the radio station.
- Selects a DAB display mode.
ZENTER :
- Stops playback or recording
- Cancels DELETE function.
d/M (Play/Pause) :
- Starts or pauses playback.
- Selects STEREO/MONO.
• • • • • • d • • • • • •
SLEEP : Sets the system to turn o
automatically at a specied time.
(Dimmer : The display window will
be darkened by half.)
DELETE : Deletes MP3/WMA/FLAC
les.
USB REC :Starts recording.
CLOCK :Sets a clock and checks a
time.
ALARM : Uses your player as an
alarm clock.
SET/RDS(Optional) :
-RDS (Radio Data System).
(Refer to page 17 )
-Conrms the clock and the
alarm setting.
DAB INFO. :
-DAB radio type.
-Changes the display information
of DAB channel.
PTY(Optional) :Searches radio
stations by radio type.
SORT/SCAN :
-Searches radio stations by radio
type.
-Aligns the service names DAB
band scanning.
?:The button is not available for
any function.
b
a
c
d
Remote control
CM2440-BB_AGBRLLK_ENG_7046.indd 8 2014-07-23  9:43:55

Getting Started 9
Getting Started
1
a1/!(Power ON/OFF)
F (Function)
Selects the function and input source.
Y/U (skip/Search)
- Searches backward or forward.
- Skips to the previous/next track/le.
TUNNING - / +
Selects the radio stations.
T(Play/Pause)
Starts or pauses playback.
I (Stop)
-Stops playback or recording.
- Cancels DELETE function.
R(Open/Close)
Opens or closes the disc tray.
bDisplay Window
c Remote sensor
d Volume Knob
Adjusts volume of speaker.
eUSB Port
- Plays and records the audio files by
connecting the USB device.
- Plays the audio files using your USB cable for
Android.
f Disc tray
gPORT. IN
Listens to music from your portable device.
Front panel
a cb d
e gf
CM2440-BB_AGBRLLK_ENG_7046.indd 9 2014-07-23  9:43:56

Getting Started10
Getting Started
1
Back panel
a FM/DAB ANTENNA
b SPEAKERS terminal
c POWER IN
a
c
b
CM2440-BB_AGBRLLK_ENG_7046.indd 10 2014-07-23  9:43:56

2 Connecting
Connecting 11
Connecting
2
Connecting the
speakers to the unit
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on the
unit. Insert the wire and release the nger pad.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
> Caution
Antenna Connection
Connect the Antenna to the antenna port on the
back of the unit. Be sure to extend the FM/DAB wire
antenna fully.
CM2440-BB_AGBRLLK_ENG_7046.indd 11 2014-07-23  9:43:56

Connecting12
Connecting
2
Optional Equipment
Connection
USB Connection
Connect the USB device (or MP3 player, etc.) to the
USB port on the front of the unit.
Removing the USB Device from the unit :
1. Choose a different function/mode or
press ZENTER on the remote control
or Ion the unit twice in a row.
2. Remove the USB device from the unit.
, Note
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
Listening to music from your
external device
This unit can be used to play the music from many
types of external device.
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing 1on the
remote control or 1/! on the unit.
3. Select the PORTABLE function by pressing
FUNCTION on the remote contro or F on the
unit.
4. Turn the external device and start playing
music.
CM2440-BB_AGBRLLK_ENG_7046.indd 12 2014-07-23  9:43:57

3 Operating
Operating 13
Operating
3
Basic Operations
When you selects USB function, you can see
messages as follows;
Message Cause
CHARGE Your device is not supported by
AOA 2.0(Only charging).
Number of
les This unit recognizes your USB.
ANDROID
This unit recognizes your Android
device supported by AOA 2.0 as
known device.
NO USB
Any device is not connected to USB
port.
This unit recognizes your Android
device as an unknown device.
Depending on the type of device, message
will appear in other way.
, Note
CD/ USB Operations
1. Insert the disc by pressing Bon the remote
control or Ron the unit.
Or connect the USB device to the USB port.
2. Select the CD or USB function by pressing
FUNCTION on the remote control or Fon the
unit.
3. Select a track/file you want to play by pressing
C/V on the remote control or Y/U
on the unit.
To Do this
Stop Press ZENTER on the remote
control or Ion the unit.
Playback Press d/Mon the remote control
or Ton the unit.
Pause During playback, press d/Mon the
remote control or Ton the unit.
Skipping to
the next/
previous
track/le
Press C/Von the remote
control or Y/U on the unit to
skip the track/le in stop state.
During playback, press Von the
remote control or Uon the unit
to go to the next track/le.
Playing less than 2 seconds, press
Con the remote control or Y
on the unit to go to the previous
track/le.
Playing after 3 seconds, press
Con the remote control or Y
on the unit to go to the beginning
of the track/le.
Searching
for a section
within a track
Press and hold C/Von the
remote control or Y/U on
the unit during playback and
release it at the point you want to
listen to.
Playing
repeatedly or
randomly
Press REPEAT(MENU) on the
remote control repeatedly, the
display changes in the following
order.
RPT1 -> RPT DIR (only MP3/ WMA/
FLAC) -> RPT ALL -> RANDOM
-> OFF
If you play a scratched disc, there are some
noise and the unit cannot read the disc.
, Note
CM2440-BB_AGBRLLK_ENG_7046.indd 13 2014-07-23  9:43:57

Operating14
Operating
3
Selecting a folder
1. Press PRESETFOLDER W/Son the remote
control repeatedly until a desired folder appears.
2. Press
d/Mon the remote control or Ton the
unit to play it. The first file of folder will play.
yUSB and CD Folders/Files are recognized as
below.
*ROOT
File_01
File
Directory
File_02
File_03
File_04
File_05
File_06
File_07
File_08
File_09
File_10
yFiles and folders will be presented in order
recorded and may be presented dierently
according to the record circumstances.
y*ROOT : the rst screen you can see when a
computer recognize the USB is “ROOT”
yFolders will be presented as the following
order;
FAT(USB) / CD : FILE_01 -> FILE_02 ->
FILE_03 -> FILE_04 -> FILE_05 -> FILE_06 ->
FILE_07 -> FILE_08 -> FILE_09 -> FILE_10
, Note
Deleting an MP3/WMA/FLAC
file
You can delete file, folder or format by pressing
DELETE on the remote control. This function is
supported only in stop state. (USB only)
1. -Select the file you want to delete and press
DELETE.
-Select the folder you want to delete by
pressing PRESETFOLDER W/Son the remote
control. Then press DELETE.
-Press and hold DELETE to format the USB
device.
Or
Press DELETE repeatedly while searching a file.
The display window will be changed in the
following order.
- DEL FILE : Deletes file
- DEL DIR?: Deletes folder
- FORMAT? : Formats USB
2. To delete file/folder or format, press d/Mon the
remote control or Ton the unit.
3. If you want to exit the current mode, press
ZENTER on the remote control or Ion the
unit.
yDo not extract the USB device during
operation.(play, delete, etc.)
yRegular back up is recommended to
prevent data loss.
yThe delete function may not be supported
according to the USB status.
> Caution
CM2440-BB_AGBRLLK_ENG_7046.indd 14 2014-07-23  9:43:57

Operating 15
Operating
3
Android device Operation
You can enjoy the sound from your Android device
through USB port. For details about Android device,
refer to the Android device User Guide.
To stream audio from your Android device through
this unit, you need :
yWith Android operation system : Ver 4.1(or later)
and AOA 2.0 (or later)
yWith a micro USB cable
yThis unit may not compatible with the
device that does not support the *AOA
(Android Open Accessory) 2.0 version. It
is possible that certain devices may not
support or be compliant with the AOA2.0
USB audio standard, resulting in the device
freezing or rebooting after being connected
and detached from the speaker system.
If you experience this problem, please
contact your device manufacturer. Your
device may need to be updated with the
latest Jellybean software and or the correct
AOA2.0 USB audio standard.
*About AOA (Android Open Accessory) 2.0
version ;
Audio output from Android device to
the Accessory and HID (Human Interface
Device)
yYou are recommended to remove the case
for your Android device (Ver4.1 or later)
before you connect your Android device to
USB port using a cable.
, Note
1. Connect Android device to the USB port by
using the Android device’s cable.
2. Press FUNCTION on the remote control or Fon
the unit to select USB function.
3. If your unit is connected firmly,‘ANDROID’ will
appear in the display window.
You can operate your Android device through
an Android device’s display by using the remote
control and controlling your Android device.
To Do this
Play Press T.
Pause During playback, press T.
Skip
During playback, press Y/U
to go to the next le or to return
to the beginning of the current
le.
During playback, press Y
twice briey to step back to the
previous le.
CM2440-BB_AGBRLLK_ENG_7046.indd 15 2014-07-23  9:43:58

Operating16
Operating
3
yIf the connection has an error, check these
problems as follows;
-Your Android device is not connected rmly.
-This unit recognizes your Android device as
an unknown device.
-Your Android device is not booted.
-Check the setting of USB connection type on
your Android device.
yIn case of no sound from this unit, adjust
the volume of your Android device.
yThe charging time may vary depending on
your Android device.
ySome Android devices may not be charged.
yYou may not control your Android device
from this unit due to malfunction of Android
device.
yDepending on your Android device’s
software version, it may not be possible
to control your Android device from this
unit. We recommend installing the latest
software version.
yIf your Android device does not support
AOA (Android Open Accessory) 2.0 version,
this unit can only charge your Android
device even though Android device has OS
4.1 (or later).
, Note Radio Operations
Listening to the radio
1. Press FUNCTION on the remote control or Fon
the unit until FM/DAB appears on the display
window.
The last received station is tuned in.
2. [FM]
Auto tuning : Press Y/Uon the unit or
TUN.-/+ on the remote control for about 2
seconds until the existing frequency starts
changing, then release. Scanning stops when
the unit tunes in a station.
Manual tuning: Press Y/Uon the unit or
TUN.-/+ on the remote control repeatedly.
[DAB]
Press TUN -/+ and press d/Mwhen scanning
stop.
3. Adjust the volume by pressing
VOL o/pon the remote control or rotate the
Volume Knob on the unit.
CM2440-BB_AGBRLLK_ENG_7046.indd 16 2014-07-23  9:43:58

Operating 17
Operating
3
Presetting the Radio Stations
You can preset 50 stations for FM/DAB.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or Fon
the unit until FM/DAB appears on the display
window.
2. [FM]
Select the desired frequency by pressing
Y/Uon the unit or TUN. -/+ remote
control.
[DAB]
Press TUN. -/+ and press d/Mwhen scanning
stop.
3. Press PROGRAM/MEMORY. A preset number
will blink on the display window.
4. Press PRESETFOLDER W/Sto select the
preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESETFOLDER W/S.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds. “CLEAR” will flash up on the display
window.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
Improving poor FM reception
Press d/Mon the remote control. This will change
the tuner from stereo to mono and usually improve
the reception.
Seeing information about a
Radio station(Optional)
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press SET/RDS
repeatedly to cycle through the various data types:
PS (Programme Service Name)
The name of the channel will appear in
the display.
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT (Time controlled by the channel)
This shows the time as broadcast by the
station.
You can search the radio stations by programme
type by pressing SET/RDS. The display will show
the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and
hold TUN.-/+. The tuner will search automatically.
When a station is found, the search will stop.
CM2440-BB_AGBRLLK_ENG_7046.indd 17 2014-07-23  9:43:58

Operating18
Operating
3
Listening to the DAB
You can change the display information of the
currently broadcasting DAB channel. Press
DAB INFO. on the remote control repeatedly, the
display changes in the following order;
SERVICE -> PTY NAME -> FREQ -> DLS -> QUALITY
-> ENSEMBLE
Select a display mode and then press
TUNING-/+, the initials of the servicename are
displayed.
SERVICE Displays the Name of the channel for
the current broadcast.
PTY NAME Displays the Type of the channel for
the current broadcast.
FREQ Displays the frequency of the channel
for the current broadcast.
DLS It displays the current Scroll of the
channel which is selected.
QUALITY It displays the current strength of the
broadcast signal.
ENSEMBLE Displays the Ensemble of the channel
for the current broadcast.
Aligning the service names
Press SORT/SCAN on the remote control to display
the sorting mode of DAB broadcastings. Then, press
the button once again to change the mode.
Default sort: The service names are aligned in a
scanning order.
Name sort: The service names are aligned in an
alphabetical order.
DAB scan
Press SORT/SCAN on the remote control for longer
than 3 seconds, all of the DAB bands are scanned.
Then press it again, scanning will be cancelled.
Deleting all of the saved DAB
scan stations
Press and hold DAB INFO. on the remote control
for 3 seconds.“DAB INIT” will be displayed. Press
DAB INFO. to erase all the saved stations.
CM2440-BB_AGBRLLK_ENG_7046.indd 18 2014-07-23  9:43:58

Operating 19
Operating
3
Other Operations
Programmed Playback
The program function enables you to store your
favorite les from any disc or USB device.
A program can contain 20 tracks/les.
1. Insert a CD or a USB and wait for it to be
ordered.
2. Press PROGRAM/MEMORY on the remote
control in stop state.
3. PressC/Von the remote control or
Y/U on the unit to select a track/file.
4. Press PROGRAM/MEMORY on the remote
control again to save and select a next track/file.
5. Press
d/Mon the remote control or Ton the
unit to play the programmed music tracks/files.
6. To clear your selection, press ZENTER on the
remote control or Ion the unit twice.
The programs are also cleared when the disc
or USB device is removed, the unit is powered
o or the function is switched to others.
, Note
Displaying file information
(ID3 TAG)
While playing an MP3 le containing le
information, you can display the information by
pressing INFO.
Turn off the sound temporarily
Press on the remote control to mute your unit.
You can mute your unit, for example, to answer the
telephone, the mute symbol“q" is displayed in
the display window.
To cancel it, press again on the remote control or
change the volume level.
Auto Power Down
This unit will be o itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 20
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input.
CM2440-BB_AGBRLLK_ENG_7046.indd 19 2014-07-23  9:43:58

Operating20
Operating
3
Sound adjustment
Setting the surround mode
This system has a number of pre-set sound elds.
You can select a desired sound mode by using
SOUND EFFECT on the remote control.
The displayed items for the Equalizer may be
dierent depending on sound sources and eects.
On Display Description
AUTO EQ
Sets the sound equalizer on the
mode that is the most similar to
the genre which is included in
the MP3 ID3 tag of song les.
POP
CLASSIC
ROCK
JAZZ
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual pop, classic
or rock concert.
MP3 -- OPT
This function is optimized
for compressible MP3 le. It
improves the treble sound.
BASS BLAST
(BASS)
Reinforces the treble, bass and
surround sound eect.
BYPASS You can enjoy the sound
without equalizer eect.
Maybe you need reset the surround mode,
after switching the input, sometimes even
after the sound track/le changed.
, Note
Setting the Clock
1. Turn the unit on.
2. Press CLOCK for at least 2 seconds.
3. Choose time mode by pressing C/Von
the remote control or Y/U on the unit.
- AM 12:00 (for an AM and PM display)
or 0:00 (for a 24 hour display)
4. Press SET/RDS to confirm your selection.
5. Select the hours by pressing C/Von the
remote control or Y/U on the unit
6. Press SET/RDS to conrm your selection.
7. Select the minutes by pressing C/Von
the remote control or Y/U on the unit.
8. Press SET/RDS to conrm your selection.
9. If you want to reset the clock, press and hold
CLOCK. Then repeat steps 3-8.
Setting the clock through
"LG Bluetooth Remote" App
Install "LG Bluetooth Remote" app on your Android
device. (refer to page 25)
Your unit's clock will be automatically synchronized
with your device by activating Bluetooth
connection through "LG Bluetooth Remote" app.
CM2440-BB_AGBRLLK_ENG_7046.indd 20 2014-07-23  9:43:58