To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
MODEL
CM8360
SIMPLE MANUAL
Mini Hi-Fi
System
ENGLISH
Additional Information
Caution
yWhen you use the multiple socket, it is advisable to use
15 A socket. 10 A socket may cause power off due to
lack of power supply.
yDo not place objects on the speakers. It may cause the
objects to fall and make property damage.
yInstall the speakers on a rm surface not to slide. The
vibration caused by the strong output can shake and
move the speakers.
yAvoid turning up max volume in a small enclosed space.
The powerful and intense output of the speakers can
shake the ceiling and get the objects in the room falling.
yTo protect from hearing damage, keep the sufcient
distance from the speaker. The overwhelming sound
from the speaker may cause a person’s hearing damage.
yAllow more than 20 cm of free space between the main
set and the speakers when you install the main set on
the ground. High sound pressure from the speakers can
make the set tremble to disturb the CD playback.
yConnect the power cord to wall outlet directly if
possible. Or when you use an extension cable, it is highly
recommended to use an extension cable of 110 V / 15
A or 230 V / 15 A, otherwise the unit may not operate
properly because of the lack of power supply.
yDo not overload the extension cord with excessive
electrical load.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit by pressing the power button for more
than 5 seconds.
Replacement of battery
About Ferrite Core (Optional)
Wind power cord cable and SPEAKERS cables around the
ferrite core.
POWER: This unit operates on a mains supply of 200 -
240 V ~, 50 / 60 Hz.
Wiring: This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the
same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement fuse
cover contact your dealer. If the type of plug supplied is
not suitable for the mains sockets in your home, then the
plug should be removed and a suitable type tted. Please
refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of
this unit must be destroyed. A mains plug with bared wires
is hazardous if inserted in a mains socket. Do not connect
either wire to the earth pin, marked with the letter E or
with the earth symbol 6or coloured green or green and
yellow. If any other plug is tted, use same rating of fuse in
the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE: As the colours of the
wires in the mains lead of this unit may not correspond
with the coloured marking identifying the terminals in your
plug, proceed as follows: The wire which is coloured blue
must be connected to the terminal which is marked with
the letter N or coloured black. The wire which is coloured
brown must be connected to the terminal which is marked
with the letter L or coloured red.
