LG CM9950 Specification sheet

Disc & Data Playback
Connection for SPEAKER LIGHTING
AUX IN Connection
PORT. IN Connection
AUDIO OUT
<
a
z
Play the music on the connected external device.
Speaker Connection Using External Device ( or )
c
Select AUX 1, AUX 2 or PORTABLE.
b
Presetting Radio Station
a
b
Select the station to preset.
Select the preset number and store the station.
Radio Operation
a
FM 87.5
b
FM 87.5
cTune the desired frequency. (Press and hold for auto tuning. Press for Manual tuning.)
Press and hold TUNER MEMORY.
cSelect preset station to listen to.
a
b
ERASE ALL ?
To delete all the saved station
Select FM.
01
www.lg.com
Printed in China
FM Antenna
Make sure to connect the speaker plugs into their corresponding colored speaker connectors.
,
Select CD, USB 1 or USB 2.
c
b
USB 1
USB 2CD
Press C/ Vto select a desired song and press d/M to play.
Press PRESETFOLDER W/S to select a folder and press d/M to play the rst le of
the selected folder.
Folder Searching
Empty folders are not searched.
,
Press TUNER MEMORY when‘ERASE ALL?’ blinks to conrm.
a
bPress and hold H/P MODE (X-BOOM PLUS).
c
H/P
MODE
X-BOOM PLUS
Rotate H/P VOL./SYNC SET to adjust Delay setting.
H/PVOL. / SYNC SE T
dPress H/P MODE (X-BOOM PLUS) to save the Delay setting.
H/P
MODE
X-BOOM PLUS
You can connect two units to play music together.
During USB 1 / 2 playback, you can adjust the tempo by rotating A / B TEMPO.
,
X-BOOM PLUS
This function is available on CD, USB 1, USB 2, BLUETOOTH, PORTABLE Function.
,
,Select STEREO or MONO on FM Function.
DEL FILE?
FORMAT?
DEL FOLDER?
Deleting File
Select to delete the le, folder or format the USB.
a
b
Select the le you want to delete in stop mode.
Select the folder you want to delete.
c
Perform the selection.
Cancel the selection.
,
DELETE
This function is supported only in stop status. (USB only).
,
ENGLISH | SIMPLE MANUAL (1 of 2)
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
Mini Hi-Fi
System
Model : CM9950
a
: USB A (USB 1) / : USB B (USB 2)
,
CM9950-FS_DUSALLK_MFL68823916_Sim_1.indd 1 2015-03-11  3:28:48

Play music on your Bluetooth device.
c
Using Bluetooth®
a
b
LGCM9950(XX)
BLUETOOTH
PAIRED
LG CM9950 (XX)
To use this unit more comfortably, install“Music Flow Bluetooth”on your bluetooth devices. Select a way of installation ( or ).
Using Music Flow Bluetooth App
Music Flow Bluetooth
Search for“Music Flow Bluetooth”on the Google Play Store.
Scan QR code.
yWhen this unit is successfully connected with your Bluetooth device, “BLUETOOTH PAIRED”will be appear on the display window.
The display will change to the Bluetooth device’s name soon after.
yIf the device name isn’t available on the unit,“_” will be displayed.
yEven when this unit is connected to 3 Bluetooth devices in the Bluetooth mode, you can play and control music by using only one
of the connected devices.
yThe multi pairing connection is only supported on Android or iOS devices. (Multi pairing connection may not be supported
depending on the connected device specications.)
yA removable/detachable Bluetooth device (Ex : Dongle etc.) doesn’t support multi pairing.
yEven when this unit is connected with multiple Bluetooth devices, only one device which is playing will keep the Bluetooth
connection, even if you change the function of the other devices.
,
Enter the PIN code (0000) as needed.
,
aPress a desired DJ eect (FLANGER, PHASER, CHORUS, DELAY). To
cancel, press it again.
b
DJ EFFECT
DJ
EFFECT
FLANGERPHASER CHORUS DELAY
Rotate EFFECT LEVEL to adjust the eect level.
EFFECT LEVEL
aSelect a desired DJ PRO mode.
b
DJ PRO
CLUB
FOOTBALL
Press a DJ Pro.Pad of desired sound.
aPress USER EQ.
b
USER EQ
Rotate MASTER EQ (BASS, MIDDLE, TREBLE) to adjust the sound level.
MASTEREQ
BASS MIDDLE TREBLE
Auto DJ blends the end of one song into the beginning of another for seamless playback.
AUTO DJ
Select a desired AUTO DJ mode.
Mixing
Move the Mix fader to adjust the sound volume of mixing sound.
AUTO
SYNC
OFF
180 150 120 . . . 10
AM 12:00 0:00
10:20
10:20
a
b
c
d
10:20
10:20
a
b
c
d
e
VOL 3
FILE-XXX_001
Additional Feature
Alarm function works only after clock is set.
,
,
cSave the setting.
AUTO DJ RANDOM
AUTO DJ SEQUENTIAL
AUTO DJ OFF
BLUETOOTH
PAIRED
Music Flow Bluetooth
a
b
MIXER ON
MIX
Only AUTO DJ SEQUENTIAL is selected when played JUKE BOX list.
,
You can adjust DJ EFFECT sound gage level between 0 to 15. The initial level is 7.
,
• Android O/S : Ver 4.0.3 (or later)
• Refer to the guide from the “Music Flow Bluetooth” App on your smart device.
,
Initial DJ Pro mode is CLUB sound eect.
,
• If NFC connection does not work well, try again after checking the location of NFC tag in your
phone.
• Android O/S : Ver 4.1.2 (or later)
,
Press LIGHTING MODE. The mode changes each time you press :
OFF →VOLCANO →POLICE →THUNDER →PSYCHE →CAOS →OFF
LIGHTING MODE
LIGHTING
MODE
• When using Mixing, you can synchronize the tempo of audio les being played in USB 1 and USB 2 by pressing
AUTO SYNC.
• The tempo of music being played in USB1 is synchronized to that in USB2.
• If you fully stop (USB 2) or change the function, AUTO SYNC function is cancelled.
Set on the Bluetooth and select “LG CM9950 (XX)”on your Bluetooth device.
Press MIX. Select a desired function for the side Aand play it.
Side Bis xed as USB2 function.
CM9950-FS_DUSALLK_MFL68823916_Sim_1.indd 2 2015-03-11  3:28:52

ENGLISH | SIMPLE MANUAL (2 of 2)
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
Mini Hi-Fi
System
Model : CM9950
www.lg.com
Printed in China
Press and hold USB REC. Press C/ Vto select a bitrate and press USB REC.
USB REC USB REC
a
To select bitrate and recording speed
b
USB REC
Press C/ Vto select a recording speed and press USB REC. (Only CD
function)
Connect an USB device and select the function (CD, AUX, PORTABLE,Tuner) to record.
a
b
USB REC
Press USB REC to start recording. Press and hold USB REC again to stop recording.
USB Recording
Press and hold JUKE BOX .
b
JUKE BOX
cPress C/ Vto select a track/le and press JUKE BOX. Repeat this step
to store more les.
JUKE BOX
Enjoy the music on the JUKE BOX playback list.
d
To enjoy JUKE BOX Playback
b
Select JUKE BOX ON in stop mode.
a
JUKE BOX
JUKE BOX
ON
JUKE BOX
OFF
Play the JUKE BOX playback list.
To make JUKE BOX Playback list
JUKE BOX
Select JUKE BOX OFF.
To delete JUKE BOX Playback List
JUKE BOX Playback
• To delete all of the JUKE BOX playback list, remove the CD or USB device from the unit.
• A playlist of up to 100 tracks/les can be entered for CD/USB 1.
,
Press and hold JUKE BOX in stop status.
a
JUKE BOX
bPress to select a track/le to delete.
Delete selected song.
c
DELETE
You can select bitrate and recording speed before recording.
To stop JUKE BOX Playback
USB Copying
Connect USB devices to USB ports and select USB 2.
a
b
USB REC
Press USB REC to start recording. Audio les in USB 2 are copied to USB 1.
USB 2
Press and hold USB REC again to stop recording.
,
Select CD or USB 1.
a
DJ
SHARING
a
Select a song to share.
b
DJ SHARING
SHARING
DJ
SHARING
c
d
This function allows you to share a song stored in an USB device using Music Flow Bluetooth App.
Make sure that Music Flow Bluetooth App is connected.
• Some functions may not work during transmission by the the App.
• Press and hold DJ SHARING to share the most recently recorded mix le. If there is no mix le, the rst audio le
in USB 1 Function will be shared.
• You can transfer a le up to 512 Mbyte.
,
Auto Power On
This unit automatically turns on by an input source : LG TV or Bluetooth
If you have already paired with this unit, automatically this unit can turn on by an input source when this unit is turned o.
Auto Function Change
This unit recognizes input signals such as Bluetooth and LGT V and then changes suitable function automatically.
HELLO
The le made by DJ Sharing is saved in the‘Bluetooth’folder on the smart device.
,Status (not in MIXER ON mode) Recording (Only CD function)
Playback One track/le
JUKE BOX playback JUKE BOX track(s)/le(s)
Full stop All track(s)/le(s)
• A le is recorded by about 512 Mbyte when you record for a long term.
• When you stop recording during playback, the le that has recorded at that time will be stored.(Execpt MP3/WMA
le)
• Recording is not supported in BLUETOOTH or LGT V mode.
• For recording, only USB port(A) is available.
• Volume level will be changed between MIN to 30 during recording. (Only CD function)
• In MIXER ON mode, all functions are available to record. Mixed sound is recorded.
• Press USB REC to pause the recording. (OnlyTuner, AUX, PORTABLE)
• It’ll be stored as follows. * The other source : AUX and the like.
AUDIO CD MP3/WMA MIX TUNER The other source*
,
You can make a playlist of your favourite tracks/les from a disc or USB device using JUKE BOX Playback.
This function is supported only on stop status.
,
,Status
Recording
Playback One track/le
JUKE BOX playback JUKE BOX track(s)/le(s)
Full stop All track(s)/le(s)
CM9950-FS_DUSALLK_MFL68823917_Sim_2.indd 1 2015-03-12  9:34:47

Additional Information
Specication
ENGLISH
Power Requirements Refer to the main label on the unit.
Power Consumption
Refer to the main label on the unit.
Networked standby : 0.4 W
(If all network ports are activated.)
Bus Power Supply (USB) 5V 0500 mA
Total Output 4400 W
Design and specications are subject to change without notice.
How to disconnect the wireless network connection or the wireless device
Turn o the unit by pressing the power button for more than 5 seconds.
• The USB function of this unit does not support all USB devices.
• Using NTFS le system is not supported. (Only FAT(16/ 32) le system is supported.)
• External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
• The DTS is not supported. In case of DTS audio format, audio is not output.
,
Music File Requirement
Sampling frequency
yMP3 : 32 - 48 kHz
yWMA : 32 - 48 kHz
Bit rate
yMP3 : 32 - 320 kbps
yWMA : 40 - 192 kbps
Maximum les Data CD : 999 / USB : 2000
Maximum folders Data CD : 99 / USB : 200
File extensions
y“.mp3”
y“.wma”
CD-ROM le format ISO9660+JOLIET
USB Flash Drive Devices that support USB2.0 or USB1.1.
Bluetooth
Codec
SBC
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may
be of sucient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: This product contains chemicals known to the State of
California to cause cancer and birth defects or other reproductive
harm. Wash hands after handling.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping
or splashing) and no objects lled with liquids, such as vases, shall
be placed on the apparatus.
WARNING: Do not install this equipment in a conned space such
as a book case or similar unit.
CAUTION: Do not use high voltage products around this product
(ex. Electrical swatter). This product may malfunction due to
electrical shock.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
over heating. The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar surface. This product
shall not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a
Laser System.To ensure proper use
of this product, please read this
owner’s manual carefully and retain
it for future reference. Shall the unit
require maintenance, contact an
authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specied herein may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not try to
open the enclosure.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an
emergency, the Power Plug must remain readily accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the
equipment: Remove the old battery or battery pack, follow the
steps in reverse order than the assembly.To prevent contamination
of the environment and bring on possible threat to human
and animal health, the old battery or the battery put it in the
appropriate container at designated collection points. Do not
dispose of batteries or battery together with other waste. It is
recommended that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer,
or sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
LG Sound Sync
ab
Set up the sound output of your TV : TV setting menu [[Sound] [[T V Sound output] [[LG Sound Sync (Wireless)]
Select LG TV function.
LG Sound Sync enables you to control some functions of this unit by a remote control of your LG TV. Controllable functions
are volume up/down and mute. Make sure that your TV has LG Sound Sync logo as shown above.
TV Speaker
External Speaker
LG Sound Sync (Optical)
LG Sound Sync (Wireless)
• For specic information of operating, refer to the instruction manual of yourT V.
• When the connections failed, make sure of the conditions of this unit and your TV : power, function.
• The amount of time to turn o this unit is dierent depending on your TV.
,
LG TV LG TV
PAIRED LG TV
How to ax the Ferrite Core
Ferrite core may not be provided depending on each nation’s regulations.
aPull the stopper [a] of the ferrite core to open.
bWind R SPEAKERS cables, L SPEAKERS cables and SPEAKER LIGHITNG cables around the ferrite core once.
cClose the ferrite core until it clicks.
Auto play
If you press d/M on the unit when CD or USB is inserted, the function is changed and music is played automatically.
LG Customer Information Center
1-800-243-0000 USA, Consumer
1-888-865-3026 USA, Commercial
Register your product Online!
www.lg.com
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and receiver.
yConnect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV technician for
help.
CAUTION : Any changes or modications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
FCC WARNING: This equipment may generate or use
radio frequency energy. changes or modications to this
equipment may cause harmful interference unless the
modications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modication is
made.
FCC RF Radiation Exposure Statement : This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated
with minimum distance 20 cm between the radiator and your
body. End users must follow the specic operating instructions for
satisfying RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.
CAUTION : Regulations of the FCC and FAA prohibit airborne
operation of radio-frequency wireless devices because their signals
could interfere with critical aircraft instruments.
Responsible Party :
LG Electronics USA, Inc. 1000 Sylvan Avenue Englewood Clis,
NJ 07632 TEL. : [phone]
Grounding
(Except for devices which are not grounded.) Ensure that you
connect the earth ground wire to prevent possible electric shock
(i.e. a Audio with a three-prong grounded AC plug must be
connected to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualied electrician install
a separate circuit breaker. Do not try to ground the unit by
connecting it to telephone wires, lightening rods, or gas pipes.
CM9950-FS_DUSALLK_MFL68823917_Sim_2.indd 2 2015-03-12  9:34:49