LG FA168DAB User manual

www.lg.com
Please read this manual carefully before operating
your set and retain it for future reference.
FA168DAB (FA168DAB, CMS2640F)
OWNER’S MANUAL
Micro Hi-Fi
System

1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.

Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
For Wireless product European Union Notice
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Please contact to the followingaddress for
obtaining a copy of the DoC (Declaration of
Conformity).
Contact oce for compliance of this product:
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
yPlease note that this is NOT a Customer
Service contact point. For Customer Service
Information, see Warranty Card or contact the
dealer that you purchased this product.
In door use only.
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20cm between the
radiator and your body.

Getting Started4
Getting Started
1
Disposal of your old appliance
1. All electrical and electronic products should
be disposed of separately from the municipal
waste stream via designated collection facilities
appointed by the government or the local
authorities.
2. The correct disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
3. For more detailed information about disposal
of your old appliance, please contact your city
office, waste disposal service or the shop where
you purchased the product.
Disposal of waste batteries/accumulators
Pb
1. This symbol may be combined with chemical
symbols for mercury(Hg), cadmium(Cd) or
lead(Pb) if the battery Contains more that
0.0005% of mercury,0.002% of cadmium or
0.004% of lead.
2. All batteries/accumulators should be disposed
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of Your old batteries/
accumulators will help to prevent potential
negative consequences for the environment,
animal and human health.
4. For more detailed information about disposal of
Your old batteries/accumulators, please contact
Your city office, waste disposal service or the
shop where You purchased the product.

Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique Features
7 Playable file Requirement
7 – Music file requirement
8 Front Panel
10 Rear Panel
11 Remote Control
2 Connecting
12 Connecting to speakers
12 – Attaching the speakers to the unit
12 Antenna Connection
13 Optional Equipment Connection
13 – USB Connection
13 – PORT. IN Connection
14 – PHONES Connection
3 Operating
15 Basic Operations
15 – CD/USB Operations
15 – Android device Operation
18 Using a Bluetooth wireless technology
18 – Listening to music of a Bluetooth
device
20 Using Bluetooth App
20 – About “LG Bluetooth Remote” App
20 – Install “LG Bluetooth Remote” App
onto Your Bluetooth Device
21 – Activate Bluetooth with “LG Bluetooth
Remote” App
21 Radio Operations
21 Listening to the radio
21 – Improving poor FM reception
21 – Presetting the Radio Stations
22 – Deleting all the saved stations
22 – Seeing information about a Radio
station
22 – Listening to the DAB
22 – Aligning the service names
22 – DAB scan
22 – Deleting all of the saved DAB scan
stations
23 Other Operations
23 – Programmed Playback
23 – Displaying file information
23 – Turn off the sound temporarily
23 – DEMO
24 – Selecting a folder and an MP3/WMA/
FLAC file
24 – Deleting an MP3/WMA/FLAC file
25 Sound adjustment
25 – Setting the sound mode
25 Setting the Clock
25 – Setting the Clock through “LG
Bluetooth Remote” App
26 – Using your player as an alarm clock
26 – Sleep Timer Setting
26 – Dimmer
26 – Auto Power Down
27 Advanced Operation
27 – Recording on USB
27 – To select recording bit rate and speed
4 Troubleshooting
28 Troubleshooting
5 Appendix
29 Trademarks and Licenses
30 Specifications
31 Maintenance
31 – Notes on Discs
31 – Handling the Unit

Getting Started6
Getting Started
1
Unique Features
Bluetooth®
Listens to music stored on your bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Connect to Android device
Enjoys music from Android device with simple
connection.
USB Direct Recording
Records music to your USB device.
LG Bluetooth Remote
LG Bluetooth Remote is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to the page 20-21.

Getting Started 7
Getting Started
1
Playable file
Requirement
Music file requirement
MP3/ WMA/FLAC le compatibility with this unit is
limited as follows :
ySampling frequency :
MP3 : within 8 to 48 kHz
WMA : within 8 to 48 kHz
FLAC : within 8 to 96 kHz(USB),
within 8 to 48 kHz(CD)
yBit rate : within 8 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yMaximum les : Under 999
yFile extensions : “.mp3”/ “.wma”/”.ac”
yCD-ROM le format : ISO9660/ JOLIET
ySupport channel(FLAC) : Up to 2 channel
ySupport output bit/sample (FLAC) : 16bit
ybps(FLAC) : Up to 2.5Mbps
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players. (Mastered/ Live File System :
Disc format system for Windows Vista)
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive :
Devices that support USB2.0 or USB1.1.
yThe USB function of this unit does not support
all USB devices.
USB device requirement
yDevices which require additional program
installation when you have connected it to a
computer, are not supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than
a few minutes to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
yThis unit is not supported when the total
number of les is 1 000 or more.
yExternal HDD, Card readers, Locked devices, or
hard type USB devices, mobile phone are not
supported.
yUSB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
ySome USB may not work with this unit.
yIn power on state, you can charge your Android
device via USB port.

Getting Started8
Getting Started
1
Front Panel

Getting Started 9
Getting Started
1
aDisc Slot
Insert a disc in the disc slot with the label side
left.
b1/! (POWER)
Switches the unit ON or OFF.
cDisplay window
Shows the current status of the unit.
dFUNC. (FUNCTION)
Changes the input source or function.
eUSB Port
Connects an USB device.
fEQ
Chooses sound impressions.
SET/RDS, DEMO
Conrms the setting./ RDS (Radio Data System).
Press DEMO in power o state to demonstrate
the function on display window. To cancel it,
press DEMO again.
ALARM
With the ALARM function you can turn CD, USB
play and TUNER reception on at a desired time.
CLOCK
For setting the clock and checking the time.
gB(OPEN/CLOSE)
Ejects or insert the disc from slot loader.
hC/V (Skip/Search):
Goes to next or previous le/track.
Searches backward or forward (Press and hold)
Tunes in the desired radio station.
d/M(PLAY / PAUSE)
Starts playback.
Pauses playback temporarily, press again to exit
pause mode.
Selects stereo/mono in FM mode.
i
o/ p(VOLUME)
Adjusts speaker volume.
Z (STOP)
Stops playback.
jUSB REC.
Recoding to USB.
kPORT. IN
Connects to a portable player with audio
outputs.
PHONES
Listens to music with your headphone.(3.5
mm)
Precautions in using the touch buttons
yUse the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
yDo not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
yTouch the button that you want to work in
order to operate the function correctly.
yBe careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
> Caution

Getting Started10
Getting Started
1
Rear Panel
a DAB ANTENNA
Connects the DAB antenna.
b ANTENNA (FM)
Connects the FM wired antenna.
cSPEAKERS terminal
dCooling fan
ePower cord

Getting Started 11
Getting Started
1
USB REC DELETE
Replacement of
battery
(R03)
(R03)
Remove the battery cover
on the rear of the Remote
Control, and insert two (size
AAA) batteries with 4and 5
matched correctly
• • • • • • a • • • • •
1(Power): Switches the unit
ON or OFF.
B(Open/Close) : Ejects the disc
from slot loader.
PRESETFOLDER W/S:
-Searches for a folder of MP3/
WMA/FLAC les. When a CD/
USB containing MP3/WMA/
FLAC les in several folders is
being played, press PRESET.
FOLDER W/Sto select the
folder you want to play.
-Chooses a preset number for
a radio station.
FUNCTION : Selects the
function and input source.
MUTE @: Mutes the sound.
VOL o/ p: Adjusts speaker
volume.
• • • • • • b • • • • •
PROGRAM/MEMORY :
- Stores radio stations.
- Creates a playlist you want to
listen to.
SOUND EFFECT : Chooses
sound impressions.
INFO :Sees information about
your music. MP3 les often
come with ID3 tags. The tag
gives the Title, Artist, Album or
Time information.
REPEAT (MENU) : Listens to
your tracks/les repeatedly or
randomly.
C/V(Skip/Search) :
-Skips Fast backward or Forward.
-Searches for a section within a
track/file.
TUNING -/+ :
-Selects the radio stations.
-Selects a DAB display mode.
ZENTER :
- Stops playback or recording.
- Cancels DELETE function.
d/M(Play/Pause) :
- Starts or pauses playback.
SLEEP : Sets the system to turn
off automatically at a specified
time.(Dimmer : The display
window will be darkened by
half.)
USB REC : Starts recording
DELETE : Deletes MP3/WMA/
FLAC files. (USB only)
• • • • • • c • • • • •
0 to 9 numerical buttons :
Selects numbered tracks, les, or
preset number.
CLOCK :Sets a clock and checks
a time.
ALARM :Uses your player as an
alarm clock.
• • • • • • d • • • • •
RDS/SET
RDS (Radio Data System) (Refer
to the page 22.) Confirms the
setting.
DAB MODE:
- DAB radio type.
- Changes the display
information of DAB channel.
PTY : Searches radio stations by
radio type.
SORT/SCAN :
- Searches radio stations by radio
type.
- Aligns the service names DAB
band scanning.
Remote Control

2 Connecting
Connecting12
Connecting
2
Connecting to
speakers
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on the
unit. Insert the wire and release the nger pad.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
> Caution
Antenna Connection
Connect the FM Wire antenna to FM ANTENNA
connector.
Connect the DAB ANTENNA.
yBe sure to fully extend the FM wire antenna.
yWhen the broadcasting signal is weak
: Check the condition of broadcasting
reception. ( check the QUALITY)
yWhen moving the unit to other areas
: Delete all of the saved DAB scanned
stations.
, Note

Connecting 13
Connecting
2
Optional Equipment
Connection
USB Connection
Connect the USB port of USB Memory to the USB
port on the unit.
Removing the USB Device from the unit
1. Choose a different function/mode or
press Ion the unit or ZENTER on the
remote control.
2. Remove the USB device from the unit.
, Note
PORT. IN Connection
The unit can be used to play the music from many
types of external device. (Portable cable is not
supplied as an accessory with this unit.)
1. Connect the portable player to the PORT. IN
connector of the unit.
2. Turn the power on by pressing 1/!.
3. Select the PORTABLE function by pressing
FUNC. on the unit or FUNCTION on the remote
control.
4. Turn on the portable player or external device
and start it playing.

Connecting14
Connecting
2
PHONES Connection
Connect a pair of stereo headphones ( 3.5 mm
phone plug) to PHONES jack on the unit for private
listening.(Headphones are not supplied as an
accessory with this unit.)
You can’t hear any sound from speakers,
while the headphones plug is inserted in the
PHONES jack.
, Note

3 Operating
Operating 15
Operating
3
Basic Operations
CD/USB Operations
1. Insert a disc by pressing Bor connect the USB
device to the USB port.
2. Select the CD or USB function by pressing
Press FUNC. on the unit or FUNCTION on the
remote control.
3. Select a track/file you want to play by pressing
C/V on the unit or the remote control.
To Do this
Stop Press Zon the unit or ZENTER on
the remote control.
Playback Press d/M.
Pause During playback, Press d/M.
Skipping to
the next/
previous
track/ le
During playback, press Vto go
to the next track/le.
Playing less than 2 seconds, press
Cto go to the previous track/
le.
Playing after 3 seconds, press C
to go to the beginning of the track/
le.
Searching
for a section
within a track/
le
Press and hold C/Vduring
playback and release it at the point
you want to listen to.
Searching
for a section
within a folder
Press PRESETFOLDER W/Son
the remote control.
Playing
repeatedly or
randomly
Press REPEAT(MENU) on the
remote control repeatedly, the
display window will be changed in
the following order,
RPT1 -> RPT DIR (only MP3/WMA/
FLAC) -> RPT ALL -> RANDOM ->
OFF
Music CDs or CD-R/CD-RW in music CD format
can be only played.(12 cm disc)
, Note
Android device Operation
You can enjoy the sound from your Android device
through USB port. For details about Android device,
refer to the Android device User Guide.
To stream audio from your Android device through
this unit, you need :
yWith Android operation system : Ver 4.1(or later)
and AOA 2.0 (or later)
yWith a micro USB cable
It is possible that certain devices may not
support or be compliant with the AOA2.0 USB
audio standard, resulting in the device freezing
or rebooting after being connected and
detached from the speaker system.
If you experience this problem, please contact
your device manufacturer. Your device may
need to be updated with the latest Jellybean
software and or the correct AOA2.0 USB audio
standard.
You can recommended to remove the case for
your Android device (Ver 4.1 or later) before
you connect your Android device to USB port
using a cable.
*About AOA (Android Open Accessory) 2.0
version ;
Audio output from Android device to
the Accessory and HID (Human Interface
Device)
, Note

Operating16
Operating
3
1. Connect Android device to the USB port by
using the Android device’s cable.
2. Press FUNC. on the unit or FUNCTION on the
remote control to select USB function.
3. If your unit is connected firmly,‘ANDROID’will
appear in the display window.
You can operate your Android device through
an Android device’s display by using the remote
control and controlling your Android device.
To Do this
Play Press d/M.
Pause During playback, press d/M.
Skip
During playback, press C/
Vto go to the next le or to
return to the beginning of the
current le.
During playback, press C
twice briey to step back to the
previous le.
When you selects USB function, you can see
messages as follows;
Message Cause
USB Your device is not supported by
AOA 2.0(Only charging)
Number of
les This unit recognizes your USB.
ANDROID
This unit recognizes your Android
device supported by AOA 2.0 as
known device.
NO USB
Any device is not connected to USB
port.
This unit recognizes your Android
device as an unknown device.
Depending on the type of device, Message will
appear in other way.
, Note

Operating 17
Operating
3
yIf the connection has an error, check these
problems as follows;
-Your Android device is not connected rmly.
-This unit recognizes your Android device as
an unknown device.
-Your Android device is not booted.
-Check the settings method of USB
connection for Android devices. Some
Android devices in the state of charge you
can not work AOA.
yIn case of no sound from this unit, adjust
the volume of your Android device.
yThe charging time may vary depending on
your Android device.
ySome Android devices may not be charged.
yYou may not control your Android device
from this unit due to malfunction of Android
device.
yDepending on your Android device’s
software version, it may not be possible
to control your Android device from this
unit. We recommend installing the latest
software version.
yIf your Android device does not support
AOA (Android Open Accessory) 2.0 version,
this unit can only charge your Android
device even though Android device has OS
4.1 (or later).
yIf you use an application, make a call, or
send and receive SMS text message,etc. on
Android device, disconnect it from this unit
and then use it.
yDisconnect your device from USB port in
case of malfunction, although the device’s
O/S is ver 4.1 (or later).
yAndroid devices are disconnected during
playback, even though Android devices
may continue to play.
, Note
yUSB connection method may appear on the
Android device when connecting this unit.
yUnplug the power cable or removing
Android device from the unit can cause this
unit may malfunction during operating the
unit after connecting the Android device to
the unit.
yOperate the Android devices after Android
device is connected to this unit.
yIn the case of some Android devices when
you connect the unit and the unit may
cause malfunction.
yAOA may not operate smoothly, depending
on the settings on Android devices.
yThis unit might not recognize Android
devices properly when connected or
disconnected to the device. Also, Android
devices may stop or not operate normally.
In this case, reboot the Android device or
disconnect it from the unit and try again.
, Note

Operating18
Operating
3
Using a Bluetooth
wireless technology
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The sound may be interrupted when the
connection is interfered by the other electronic
wave or you connect the bluetooth in the other
rooms.
Connecting individual devices under
Bluetooth® wireless technology does not incur any
charges. A mobile phone with
Bluetooth® wireless technology can be operated
via the Cascade if the connection was made via
Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
Listening to music of a
Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the Press
FUNC. on the unit or FUNCTION on the remote
control.“BT READY” appears in the display
window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit dispalys as “LG MICRO(XX:XX)”.
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG MICRO
(F7:08)” on your Bluetooth device.
, Note
3. Enter the PIN code.
PIN code : 0000
4. When this unit is successfully paired with your
Bluetooth device, “BT PAIRED” appears in the
display window.
Depending on the Bluetooth device type,
some devices have a dierent pairing way.
, Note
5. Listening to music.
To play a music stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide. According to your Bluetooth device’s
volume level, the volume level of Bluetooth will
be adjusted.
ySound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
yWhen you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
, Note

Operating 19
Operating
3
yWhen using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-There is a obstacle between the unit and
the bluetooth device.
-There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
yYou should connect your Bluetooth device
to this unit again when you restart it.
yThe sound may be interrupted when
the connection interfered by the other
electronic wave.
yYou cannot control the Bluetooth device
with this unit.
yPairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yDepending on the type of the device,
you may not be able to use the Bluetooth
function.
yYou can enjoy wireless system using phone,
MP3, Notebook, etc..
yWhen not connected the Bluetooth,
“BLUETOOTH”and“BT READY” appears on
the control panel.
yWhen someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yThe more distant between the unit and
the bluetooth device, the lower the sound
quality becomes.
yWhen Bluetooth connection is
disconnected, connect the bluetooth device
to the unit again.
yBluetooth connection will be disconnected
when the unit is turned o or the bluetooth
device gets far from the unit.
yAfter your device is connected to the unit
via Bluetooth, the function switches to BT
automatically. But while recording, it doesn’t
switch to BT.
, Note

Operating20
Operating
3
Using Bluetooth App
Only Android OS is available to use“LG
Bluetooth Remote” app with this unit.
, Note
About “LG Bluetooth Remote”
App
“LG Bluetooth Remote”app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free“LG Bluetooth Remote”
app.
Install “LG Bluetooth Remote”
App onto Your Bluetooth
Device
There are two ways to install“LG Bluetooth
Remote”App onto Your Bluetooth Device.
Install “LG Bluetooth Remote” App
through QR code
1. Install “LG Bluetooth Remote”app through QR
code. Use the scanning software to scan the QR
code.
2. Tap an icon for installation.
3. Tap an icon for downloading.
yMake sure that your Bluetooth device is
connected to the Internet.
yMake sure that your Bluetooth device has a
scanning software application. If you don’t
have one, download one from “Google
Android Market (Google Play Store)”.
, Note
Install “LG Bluetooth Remote” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “LG Bluetooth
Remote”and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
yMake sure that your Bluetooth device is
connected to the Internet.
yMake sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
, Note
This manual suits for next models
1
Table of contents
Other LG Stereo System manuals