LG OK99M User manual

OWNER’S MANUAL
Mini Hi-Fi
Audio
MODEL
OK99M
2308_Rev01
www.lg.com
Copyright © 2023 LG Electronics Inc. All Rights Reserved.
Please read this manual carefully before operating your set and retain it for future
reference.

1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.

Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or re. Periodically
examine the cord of your device, and if its appearance
indicates damage or deterioration, unplug it,
discontinue use of the device, and have the cord
replaced with an exact replacement part by an
authorized service center. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the device.
CAUTION: Be careful to make sure children do not
put their hands or any objects into the *speaker duct.
* speaker duct: A hole for plentiful bass sound on
speaker cabinet. (enclosure)
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.

Table of Contents4
Table of Contents
3 Operating
18 Basic Operations
18 – USB Operations
18 – Auto Play
19 – Selecting a folder and
an MP3/WMA file
20 – Deleting a file/folder or format
20 Playback Effect
20 – DJ EFFECT
21 – DJ SCRATCHER
22 – AUTO DJ
22 – DJ PAD
23 – DJ LOOP
23 – PARTY ACCELERATOR
24 – MIX
24 – TEMPO
24 – AUTO SYNC
25 – DJ STAR
25 – REAL SCRATCHER
25 – CUE
26 Using BLUETOOTH® wireless technology
26 – Listening to music stored on the Bluetooth
devices
29 Using the LG XBOOM App
29 – About “LG XBOOM” App
29 – Install “LG XBOOM” App onto Your
Bluetooth Device
30 – Activate Bluetooth with “LG XBOOM” App
31 Sound adjustment
31 – Setting the sound mode
31 – Setting the USER EQ
32 Advanced Operations
1 Getting Started
2 Safety Information
6 Unique Features
7 Playable file Requirement
7 – Music file requirement
7 – Compatible USB Devices
7 – USB device requirement
8 Remote control
10 Top panel
12 Front panel / Rear panel
13 Carrying the unit
2 Connecting
14 AC Power Cord Connection
14 Optional Equipment Connection
14 – AUX IN 1 Connection
15 – AUX IN 2 Connection
15 – Listening to music from your portable player
or external device
16 LG Sound Sync
17 – USB Connection

Table of Contents 5
1
2
3
4
5
32 – Recording to USB
34 Other Operations
34 – Turn off the sound temporarily
34 – CHILDSAFE Mode
34 – DEMO
34 – Resume stop
34 – Using Microphone
36 – Using H/P MODE
37 – LIGHTING
37 – Sleep Timer Setting
37 – Dimmer
38 – AUTO POWER On
39 – Auto function change
40 Setting the Clock
40 – Setting the Clock through “LG XBOOM” App
41 WIRELESS PARTY LINK Connection
4 Troubleshooting
42 Troubleshooting
42 – General
43 – NOTES to release Demo mode
5 Appendix
44 General specifications
45 Trademarks and licenses
46 Maintenance
46 – Handling the Unit

Getting Started6
Getting Started
1
Unique Features
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
LG XBOOM
LG XBOOM is an app designed to let you take
control of some of LG’s latest audio devices. (Page
29-30)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.

Getting Started 7
Getting Started
1
Playable file
Requirement
Music file requirement
MP3/WMA le compatibility with this unit is limited
as follows.
ySampling frequency: within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yBit rate: within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yMaximum les: 2,000
yMaximum folders: 200
yFile extensions: “.mp3”/ “.wma”
yCertain MP3/WMA les may not be played
depending on the type or format of the le.
Compatible USB Devices
yMP3 Player: Flash type MP3 player.
yUSB Flash Drive:
Devices that support USB2.0 or USB1.1.
yThe USB function of this unit does not support all
USB devices.
USB device requirement
yDevices which require additional program
installation when you have connected it to a
computer, are not supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than a
few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
yThis unit recognizes up to 2,000 les.
yExternal HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yUSB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
ySome USB may not work with this unit.

Getting Started8
Getting Started
1
Remote control
EQ
2
Replacement of battery
(R03)
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4and 5
matched correctly.
Risk of re or explosion if the battery is replaced by
an incorrect type.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1(Standby): Turns the power on or off.
2(Function): Selects the function and input source.
Input source / Function Display
USB USB1 / USB2
AUX (3.5 mm) input AUX 1
AUX input AUX 2
Bluetooth BLUETOOTH
LG Sound Sync (Wireless) LG TV
VOL (Volume) +/-:Adjusts speaker volume.
J(Information) :
- Sees information about your music. An MP3 le
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
- Sees Bluetooth device name of the unit in
BLUETOOTH READY.
- Sees the name of connected all Bluetooth device
in Bluetooth mode.
- When these units are successfully connected each
other in WIRELESS PARTY LINK mode, each of
connected device names appears in the each unit.
[ (Mute): Mutes the sound.
FOLDER W/S:Searches for a folder of MP3/WMA
les. When a USB containing MP3/WMA les in
several folders is being played, press FOLDER W/S
to select the folder you want to play.
LIGHTING: Selects the lighting mode.
AUTO DJ: Selects the AUTO DJ mode. (Page 22)
DELETE: Deletes MP3/WMA les. (Page 20)

Getting Started 9
Getting Started
1
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
REPEAT: Listens to your les repeatedly or randomly.
C/V (Skip/Search):
- Skips backward or forward.
- Searches for a section within a le.
N (Play/Pause): Starts or pauses playback.
Z (Stop):
- Stops playback.
- Cancels DELETE function.
EQ: Chooses sound impressions.
SPECIAL EQ: Chooses special equalizer.
BASS BLAST (or BASS BLAST+) : Press to select
BASS BLAST (or BASS BLAST+) effect directly.
• • • • • • • • • • • • • • c • • • • • • • • • • • • •
0 to 9 numerical buttons: Selects numbered les.
CLOCK: Sets a clock and checks a time.
?: This button is not available.
• • • • • • • • • • • • • • d • • • • • • • • • • • • •
VOICE CANCELLER: You can reduce the vocal tones
during music playback from various input sources.
SLEEP: Sets the system to turn off automatically at
a specified time.
(Dimmer: The display window will be darkened by
half.)
SET: Conrms the setting.
KEY CHANGER (L/l): Changes the key to suit your
vocal range.
MIC (Microphone) ECHO: Selects ECHO mode.
?: This button is not available.
VOCAL EFFECTS: Selects various vocal effects
mode.
USB REC:
- Records to USB.
- Stops recording.

Getting Started10
Getting Started
1
Top panel
l
h
a
o
p
m
k
i
j
bcde
q
r
fg
n
s
a H/P (Headphone) VOLUME -/+
Adjusts headphone volume.
b 1(Standby)
Turns the power on or off.
c 2(Function)
Selects the function and input source.
Input source / Function Display
USB USB1 / USB2
AUX (3.5 mm) input AUX 1
AUX input AUX 2
Bluetooth BLUETOOTH
LG Sound Sync (Wireless) LG TV
d HEADPHONE IN jack
USB 1 Port
You can play sound les by connecting the USB
device.
e Display window
fTEMPO A -/+
Adjusts TEMPO in USB 1 function.
MASTER VOLUME -/+
Adjusts speaker volume.
TEMPO B -/+
Adjusts TEMPO in USB 2 function.
g USB 2 Port
You can play sound les by connecting the USB
device.
RECORD PORT
You can record les from various sources.
h USB REC / DEMO
- Records to USB.
- Stops recording.
- In power off status, if you press USB REC /
DEMO, show demo mode.
iMIC (Microphone) ECHO
Selects ECHO mode.
j MIC (Microphone) VOLUME -/+
Adjusts microphone volume.
k VOCAL EFFECTS
Selects various vocal effects mode.
VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
KEY CHANGER
Changes the key to suit your vocal range with
rotating MIC VOLUME.
lSide 2 / Basic controls (USB 2 only)
Z (Stop)
Stops playback or cancels DELETE function.
C/V (Skip/Search)
- Skips backward or forward.
- Searches for a section within a file.
N (Play/Pause)
Starts or pauses playback.
CUE
Sets cue point on DJ STAR mode.
SEARCH
Moves to folder or file in selection mode.
OK
Selects a folder when searching a file.
REAL SCRATCHER / SEARCH & MULTI
- Turns clockwise or counterclockwise to make
scratch sound.
- Turns clockwise or counterclockwise to control
playback point on DJ STAR mode.
- Searches a folder or a file.
- Selects the lighting effects.

Getting Started 11
Getting Started
1
SPECIAL EQ
- Chooses special equalizer.
DJ LOOP
Selects DJ LOOP mode.
(DJ LOOP mode can use during USB playback.)
LIGHTING
Selects the lighting mode.
m J(Information) :
- Sees information about your music. An MP3 le
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
- Sees Bluetooth device name of the unit in
BLUETOOTH READY.
- Sees the name of connected all Bluetooth device
in Bluetooth mode.
- When these units are successfully connected each
other in WIRELESS PARTY LINK mode, each of
connected device names appears in the each unit.
n CLUB, DRUM, USER (DJ PAD)
Selects CLUB, DRUM or USER sound effect to
mix.
(If you want to use USER, you have to register a
source with “LG XBOOM” app.)
1, 2, 3 (DJ PAD)
Press a desired sound pad.
o AUTO SYNC
When using MIX/DJ STAR, you can synchronize
the tempo of audio files being played in USB 1
and USB 2 by pressing AUTO SYNC.
MIX
Mixes audio sound.
Cross fader
Move the cross fader to adjust the sound volume
of mixed sound when using MIXER/DJ STAR ON.
p PARTY ACCELERATOR lever
Slide the lever to create a party atmosphere.
PARTY ACCELERATOR MODE
Selects PARTY ACCELERATOR MODE.
q BASS BLAST (or BASS BLAST+)
Press to select BASS BLAST (or BASS BLAST+)
effect directly.
r Side 1 / Basic controls ( USB 1 / BLUETOOTH
only)
Z (Stop)
Stops playback or cancels DELETE function.
C/V (Skip/Search)
- Skips backward or forward.
- Searches for a section within a file.
N (Play/Pause)
Starts or pauses playback.
CUE
Sets cue point on DJ STAR mode.
SEARCH
Moves to folder or file in selection mode.
OK
Selects a folder when searching a file.
REAL SCRATCHER / SEARCH & LEVEL
CONTROL
- Turns clockwise or counterclockwise to make
scratch sound.
- Turns clockwise or counterclockwise to control
playback point on DJ STAR mode.
- Turns clockwise or counterclockwise to control
the USER EQ level.
- Searches a folder or a file.
- Adjusts DJ EFFECT level.
- Selects vocal effects.
DJ EFFECT
Selects a desired DJ EFFECT.
DJ LOOP
Selects DJ LOOP mode.
(DJ LOOP mode can use during USB playback.)
USER EQ
Selects the equalizer created by your own.
s H/P (Headphone) MODE
Press to select a headphone monitor mode.
3TWIN
Connects two speakers for TWIN mode in
WIRELESS PARTY LINK.
DJ STAR
Turns on or off the DJ STAR mode.

Getting Started12
Getting Started
1
Front panel / Rear panel
a
b
c
c
d
c
h
e
fg
a (Auto Music Play)
Plays the audio currently playing by tagging the
mobile (with “LG XBOOM” App) to this unit.
(Android Only)
bMIC (Microphone) 1/2 jack
c Lighting
d (Remote sensor)
Place the speaker at a safe distance from the
child’s reach. Otherwise it may result in the
speaker falling down and causing personal injury
and/or property damage.
> Caution
e Lighting
f AUX IN 2 (L/R): Connect an auxiliary device.
g AUX IN 1: Connect a portable device.
hAC IN socket
yConnect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may
not operate properly because of the lack of
power supply.
yDo not overload the extension cord with
excessive electrical load.
> Caution

Getting Started 13
Getting Started
1
Useful functions for using the unit
Function Description To do Do this
BT Lock On/Off
(Page 28)
It allows you to connect a
Bluetooth device only on
BLUETOOTH and LG TV
functions.
Initial setting of this function
was set to off.
ON Press and hold N on the remote control or
N on the side 1 of the unit for 5 seconds in
BLUETOOTH function.
OFF Press and hold N on the remote control or
N on the side 1 of the unit for 5 seconds in
BLUETOOTH function.
Auto Power On
(Page 38)
It allows the unit to turn on
automatically by input signals:
LG TV or BLUETOOTH
ON Turn off the unit by pressing 1 on the unit
for 5 seconds.
OFF Turn off the unit by pressing 1 on the unit
for 5 seconds.
Carrying the unit
The unit has wheels and handles so you can easily
move the unit.
Handles
yDo not roll the unit on an unpaved road or
the stairs.
yWhen carrying the unit, be careful not to
drop it.
yDisconnect all connected cables before
carrying the unit.
yDo not place the unit on anything unstable.
Place the unit at a safe distance from a child’s
reach.
yBe careful so that the unit does not fall
down. Otherwise it may result in malfunction
or cause personal injury and/or property
damage.
> Caution

2 Connecting
Connecting14
Connecting
2
AC Power Cord
Connection
1. Connect one end of the AC power cord (included)
to the AC IN socket.
2. Plug the other end into the wall outlet.
Unplug the AC power cord from the wall outlet
if you do not to use for an extended period of
time.
, Note
Optional Equipment
Connection
AUX IN 1 Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc.) to the AUX IN 1 (3.5 mm)
connector.
3.5 mm stereo
cable
MP3 player etc.

Connecting 15
Connecting
2
AUX IN 2 Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN 2 (L/R) connector. If your
device has only one output for audio (mono), connect
it to the left (white) audio jack on the unit.
DVD, Blu-ray player etc.
Audio cable
White
Red
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the AUX IN 1
connector of the unit.
Or
Connect the external device to the AUX IN 2
connector of the unit.
2. Turn the power on by pressing 1.
3. Press 2 to select AUX 1 or AUX 2 function.
4. Turn on the portable player or external device and
start it playing.
Automatically switches to the AUX 1 function
when you connect the portable device to the
AUX IN 1 connector.
, Note

Connecting16
Connecting
2
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control:
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
1. Turn on the unit by pressing 1.
2. Press 2
until LG TV function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit:
TV setting menu [Sound] [TV Sound output]
[LG Sound Sync (Wireless)]
You can see “LG TV PAIRED” on the display
window if connecting normally between this unit
and your TV.
yYou can also use the remote control of
this unit while using LG Sound Sync. If you
use TV’s remote control again, the unit
synchronizes with the TV. (According to TV
Specifications, the volume and mute of this
unit synchronize with TV.)
yIf the connection fails, check the conditions of
this unit and your TV: power, function.
yMake sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
- The unit is turned off.
- Changing to a different function.
- Disconnecting the wireless connection
caused by interference or a distance.
yIf you try to change the function on using
the LG TV function, volume will be change
according to the LG TV volume level.
yDetails of TV setting menu vary depending on
models of your TV.
yIf you turned off the unit directly by pressing
1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yThe volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yWhen you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yYou should set the TV Sound output manually
depending on the TV version.
yIf you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit
may louder the volume due to synchronizing
volume with TV’s.
, Note

Connecting 17
Connecting
2
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
Removing the USB device from the unit:
1. Choose a different function/mode or
press Z twice in a row.
2. Remove the USB device from the unit.
, Note

3 Operating
Operating18
Operating
3
Basic Operations
USB Operations
1. Connect the USB device to the USB port.
2. Select USB function by pressing 2.
To Do this
Stop Press Z.
Playback Press N.
Pause Press N during playback.
Searching for a
section within
a le
Press and hold C/V during
playback and release it at the point
you want to listen to.
Selecting a le
directly
Press 0 to 9 numerical buttons on
the remote control to go to the
desired le directly.
Skipping to
the next/
previous le
- In stop status,
Press C/V to go to the next/
previous le.
- During playback,
(1) By using C/V buttons:
Press V to go to the next le.
Playing in less than 3 seconds, press
C to go to the previous le.
Playing after 3 seconds, press C to
go to the beginning of the le.
(2) By using SEARCH:
Rotate REAL SCRATCHER /
SEARCH & LEVEL CONTROL on
the side 1 of the unit
(or REAL SCRATCHER / SEARCH &
MULTI on the side 2 of the unit)
or C/Vand press N to play
the le.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly. Refer to the note
for details about the display change.
yRepeat/Shufe playback operates as follows.
On Display Description
OFF Plays songs in order, and stops
the playback.
ONE Plays a same song repeatedly.
FOLDER Plays songs in a folder
repeatedly.
ALL Plays all the songs repeatedly.
SHUFFLE
Plays all the songs once
randomly, and stops the
playback.
yEven after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
, Note
Auto Play
When USB is inserted
- If you press N on the side 1 of the unit, the
function is changed to USB 1 and playback
starts. (Except BLUETOOTH function)
- If you press N on the side 2 of the unit, the
function is changed to USB 2 and playback
starts. (Except MIXER/DJ STAR ON mode)
.
When USB is inserted
- Function is changed to USB 1
if C/V, Z, SEARCH on the side 1 of
the unit is pressed. (Except BLUETOOTH
function)
- Function is changed to USB 2
if C/V, Z, SEARCH on the side 2 of the
unit is pressed. (Except MIXER/DJ STAR ON
mode)
, Note

Operating 19
Operating
3
Selecting a folder and
an MP3/WMA file
On the unit
1. Press SEARCH and rotate REAL SCRATCHER /
SEARCH & LEVEL CONTROL on the side 1 (or
rotate REAL SCRATCHER / SEARCH & MULTI
on the side 2) or C/Vuntil a desired file
appears. You can also search a folder if you press
SEARCH again.
2. Press OK or N to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or N again. The selected
file is played.
On the remote control
1. Press FOLDER W/S repeatedly until a desired
folder appears.
2. Select the file you want by using C/V.
3. Press N to play it.
yUSB Folders/Files are recognized as below.
*
yIf there is no le in a folder, the folder will not
appear.
yFolders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yFile will be played from $ le No.1 to $ le
No.14 one by one.
yFiles and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
*ROOT: The rst screen you can see when a
computer recognize the USB is “ROOT”.
, Note

Operating20
Operating
3
Deleting a file/folder or format
You can delete le, folder on your USB or format the
USB.
1. Select USB function by pressing 2.
2. Press DELETE on the remote control repeatedly,
the display changes as followings.
DEL FILE ? DEL FOLDER ? FORMAT ?
On Display Description
DEL FILE ? Select the le you want to
delete.
DEL
FOLDER ?
Select the folder you want to
delete.
FORMAT ? Select to format the USB
device.
If you want to exit the current mode, press Z.
3. To delete file/folder or format, press and hold
DELETE on the remote control.
yDo not extract the USB device during
operation. (play, delete, etc.)
yRegular back up is recommended to prevent
data loss.
yThe delete function may not be supported
according to the USB status. (lock, etc.)
> Caution
Playback Effect
The unit supports various sound and playback
effects: DJ EFFECT, DJ SCRATCHER, AUTO DJ, DJ PAD,
DJ LOOP, PARTY ACCELERATOR, MIX, TEMPO, AUTO
SYNC, REAL SCRATCHER, CUE.
DJ EFFECT
It allows you to enjoy DJ EFFECT such as FLANGER/
PHASER/WAH/DELAY/VCF/ROLLING/BIT CRUSH
sound effect.
1. Press DJ EFFECT on the unit to select a desired
DJ EFFECT.
Normal mode
(FLANGER, PHASER, WAH, DELAY, OFF)
DJ STAR mode
(VCF, PHASER, FLANGER, DELAY, ROLLING, BIT
CRUSH, OFF)
2. Turn REAL SCRATCHER / SEARCH &
LEVEL CONTROL on the unit clockwise or
counterclockwise to adjust the DJ EFFECT level
between 0 to 15.