LG MUSIC flow H4 Specification sheet

Model : NP8350 / NP8350W
NP8350B / NP8350D
SMART Hi-Fi AUDIO
Wireless Multi-room
ENGLISH | SIMPLE MANUAL
The actual product may dier from the image.
ENG
FRE
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 1 2015-07-27  4:23:55

Getting Started
2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping or
splashing) and no objects lled with liquids, such as vases, shall be placed
on the apparatus.
WARNING: Do not install this equipment in a conned space such as a
book case or similar unit.
CAUTION: Do not use high voltage products around this product. (ex.
Electrical swatter) This product may malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from over
heating. The openings shall be never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product shall not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instruction has been
adhered to.
1 Getting Started
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 2 2015-07-27  4:23:55

Getting Started 3
1
Getting Started
NOTICE: For safety marking information including product identication
and supply ratings, please refer to the main label on the bottom or rear of
the apparatus.
CAUTION : Only use the AC adapter supplied with this device. Do not
use a power supply from another device or another manufacturer. Using
any other power cable or power supply may cause damage to the device
and void your warranty. If you do not use supplied adapter, charging is
unavailable or charging time may dier.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and
has no additional outlets or branch circuits. Check the specication
page of this owner’s manual to be certain. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or re.
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized service center. Protect the power cord from physical
or mechanical abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance. The Power Plug is the
disconnecting device. In case of an emergency, the Power Plug must
remain readily accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the
equipment: Remove the old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent contamination of the
environment and bring on possible threat to human and animal health,
the old battery or the battery put it in the appropriate container at
designated collection points. Do not dispose of batteries or battery
together with other waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators. The battery should
not be exposed to excessive heat such as sunshine, re or the like.
CAUTION when using this product in environments of low humidity
yIt may cause static electricity in environments of low humidity.
yIt is recommended to use this product after touching any metal object
which conducts electricity.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 3 2015-07-27  4:23:55

Getting Started
4
Getting Started
1
WARNING: This unit contains magnets which can be harmful to some
kind of object ( Ex : Magnetic card, Pacemaker etc..).
Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada
Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device
This class B digital apparatus complies with Canadian ICES-
003
CAN ICES-3 (B)/NMB-3(B)
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
WARNING:
i. the device for operation in the band 5150–5250 MHz is
only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;
ii. the maximum antenna gain permitted for devices in
the bands 5250–5350 MHz and 5470–5725 MHz shall
comply with the e.i.r.p. limit; and
iii. the maximum antenna gain permitted for devices in
the band 5725–5825 MHz shall comply with the e.i.r.p.
limits specied for point-to-point and non point-to-
point operation as appropriate.
iv. High-power radars are allocated as primary users
(i.e. priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 4 2015-07-27  4:23:56

Getting Started 5
1
Getting Started
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 5 2015-07-27  4:23:56

Table of Contents
6
Table of Contents
1 Getting Started
2 Safety Information
5 – IMPORTANT SAFETY INSTRUCTIONS
8 Unpacking
8 Product Overview
9 Charging the Unit
9 Basic Operations
9 – Using 1/! button
9 – Changing the mode
2 Using Multi-Room
10 Multi-Room Network Setup
10 – Step 1. Home Network Requirement
11 – Step 2. Installing “Music Flow Player” App and Media
Server
13 – Step 3. Initial Multi-Room Setup
16 – Step 4. Adding Speakers (Optional)
18 – Using the Bridge
19 Enjoying Multiple MUSICow Product
19 – 1. Home Cinema Mode
20 – 2. Grouping Mode
20 – 3. L/R Stereo Mode
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 6 2015-07-27  4:23:56

1
2
3
4
5
Table of Contents 7
3 Using External Device
21 Using External device
21 – 1. PORTABLE IN connection
21 – 2. BLUETOOTH®connection
4 Troubleshooting
22 Troubleshooting
5 Appendix
27 About Status LED’s Condition
28 About Ferrite Core (Optional)
28 – How to attach the ferrite core
29 Specication
30 Open source software notice
yTo view the instructions of advanced features, visit
http://www.lg.com and then download Owner’s
Manual. Some of the content in this manual may dier
from your unit.
yDepending on the region, Music Flow Player application
and series of MUSICow product, some of the content
in this manual may dier.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 7 2015-07-27  4:23:56

Getting Started
8
Getting Started
1
Product Overview
a 1/! (Standby/On)
bF (Function): Selects the function and input source.
c
-/+ (Volume)
d (Play/Pause): Starts playback or pauses playback.
e
Speaker
f (Wi-Fi): Connects initial MUSICflow product to your
network wirelessly.
g (Add): Adds the additional MUSICflow product to your
network. (In case that one or more MUSICflow product is
connected)
h (Portable Input): Connects the external device.
i
DC IN 12 V: Connects the supplied AC adapter.
Unpacking
Simple
manual
AC Adapter
Unit
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 8 2015-07-27  4:23:57

Getting Started 9
1
Getting Started
,Note
How to check the battery life:
when the unit is turned on, press the 1/!
1/! (White) : More than 60 %
1/! (Amber) : More than 15 %
1/! (Amber Blinking) : Less than 15 %
Basic Operations
Using 1/! button
On : Press 1/!
Off : Press and hold 1/!
Changing the mode
Press F (Function) button repeatedly. Then the mode is changed.
(Wi-Fi àBluetooth àWi-Fi)
,Note
When you connect the portable cable, the function is changed
as below. (Wi-Fi àBluetooth àPortable In àWi-Fi)
Charging the Unit
This unit uses built-in battery.
Before using it, charge the
battery by connecting the AC
Adapter.
Checking the charging
status
Charging :
1/! button turns red.
Fully charged :
1/! button turns white.
Approx.
3 hours
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 9 2015-07-27  4:23:58

Using Multi-Room
10
2
Using Multi-Room
Multi-Room Network Setup
Step 1. Home Network Requirement
a
b
c
d
aMake sure that wireless network environment using a
router is installed at your home. The home router should be
connected to the internet.
bConnect your smart device to your home network.
cConnect the speaker to the power supply.
dIf you want to enjoy the music on media server (PC, Mac or
Network Storage), connect the media server to your home
network.
.Caution for Home Network Requirement
yMUSICow system communicates over both 2.4 GHz and
5 GHz home network supporting 802.11b/g/n wireless
technology.
yWireless signal interference may lead to disconnection of
network or stopping playback.
yDepending on the speed of your network, playback of online
contents may not work well.
yNetwork connection may not be made with some routers
(or modem) from certain internet communication service
providers. In such case, purchase a router from general
market and use.
yBecause of a rewall on your PC, Music Flow PC Software may
not work well. In this case, disable all your rewalls and try to
connect again. Refer to your rewall’s instruction or website.
2 Using Multi-Room
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 10 2015-07-27  4:23:58

Using Multi-Room 11
2
Using Multi-Room
Step 2. Installing “Music Flow Player”
App and Media Server
Installing “Music Flow Player” App
Download “Music Flow Player” on the App store or Google Play
Store.
A B
OR
AType “Music Flow Player” in the search bar and tap“Search”.
BScan the QR code using the scanning application.
,Note for“Music Flow Player” App
yDepending on the device, “Music Flow Player” app may not
work.
yMusic Flow Player app will be available in version of the
software as follow;
Android O/S : Ver 4.0 (or later)
iOS O/S : Ver 6.0 (or later)
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 11 2015-07-27  4:23:59

Using Multi-Room
12
2
Using Multi-Room
Installing Media Server software on your PC or
Mac
Media server software allows you to access audio les stored in
media server (PC, Mac or Network storage) and enjoy them on
your speaker via home networking. On www.lg.com website,
type model name in the search bar and nd media server
software on support tab.
yWindows : Music Flow PC Software
yMac OS : Nero MediaHome 4 Essentials
,Note for using Media Server
yOn your PC or Mac, you must share the folder contained
Audio content to play them on MUSICow system.
yOn your NAS Device, you must also need to change the
settings of your NAS device to ensure that DLNA server is
enabled.
yOn your Firewall software, you may also need to change the
settings of your rewall software to ensure that Windows le
sharing is not blocked.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 12 2015-07-27  4:23:59

Using Multi-Room 13
2
Using Multi-Room
Step 3. Initial Multi-Room Setup
Wireless connection
(Standard Wireless Connection)
MUSICow product oers music streaming service within home
router’s Wi-Fi coverage.
Connect the one of MUSICow products (sound bar, speaker or
bridge) to the home router wirelessly.
(Option)
Then you can connect the additional MUSICow products to
your home Wi-Fi network wirelessly.
Refer to“Step 4. Adding Speakers (Optional)”on page 16.
Wireless signal
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 13 2015-07-27  4:23:59

Using Multi-Room
14
2
Using Multi-Room
Simple Setup Guide (Wireless Connection)
1. Ensure your smart device is connected to your Wi-Fi
network.
2. Select the product you want to connect.
3. Launch Music Flow Player App and follow“Wireless
Connection” instructions on set-up wizard.
4. Press button on the MUSICflow product (sound bar,
speaker or bridge).
5. Check if the F (Function) indicator LED is blinking in a white
and red color.
6. Please input the password of Home Router for connecting
MUSICflow product to home router.
If you have iOS device, you must take the three steps
below
6-1. Press home button of iOS device and go to [Settings].
If you can select “MusicFlow_Setup”in Wi-Fi settings. The
App and MUSICflow product will be connected.
6-2. Move to Music Flow Player App and input the password of
home router for connecting MUSICflow product to home
router.
6-3. Press home button of iOS device and go to [Settings].
Reconnect to your Home Wi-Fi network. And move to
Music Flow Player App again.
7. If you installed successfully. Update speaker software to the
latest:
[Home àSettings àVersion Info]
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 14 2015-07-27  4:23:59

Using Multi-Room 15
2
Using Multi-Room
,Note
If you failed for “Wireless connection”conguration. It seems
that location is too far from the router, it may not be connected.
Place and use it at a location that is close enough to router.
mTip
Oers music streaming service in MUSICow system within
home router’s Wi-Fi coverage.
In the below case, Standard wireless connection is
recommended.
1. When all speakers are within the home router’s Wi-Fi
coverage.
(your home router supports 802.11n 2.4/5 GHz )
2. When you want to use in below mode.
1) when you use single speaker MUSICflow system.
2) Group-play in the Wi-Fi coverage of the home router
3) L/R stereo Mode.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 15 2015-07-27  4:23:59

Using Multi-Room
16
2
Using Multi-Room
Step 4. Adding Speakers (Optional)
If you connect the initial MUSICow product to your home
network, you can connect the additional MUSICow products
(sound bar, speaker or bridge) to your home network.
Simple Setup Guide (Add Speakers)
1. If you have additional speakers, power on the speaker.
2. Launch smart device or PC application and follow
instructions on set-up wizard.
[Home àAdd Speakers]
3. Press button on the MUSICflow product (sound bar,
speaker or bridge) which is you want to connect.
4. Check if F (Function) LED is blinking in a red color.
5. If you installed successfully. Update speaker software to the
latest:
[Home àSettings àVersion Info]
,Note
If you failed for “Add Speaker” conguration. It seems that
location is too far from between speakers, it may not be
connected. Place and use it at a location that is close enough to
router and each speakers.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 16 2015-07-27  4:23:59

Using Multi-Room 17
2
Using Multi-Room
,Note for Multi-Room Setup
yYou can make all wireless/wired connection according to the
location of the router. But we recommend that you connect
the bridge to the router using LAN cable and connect
additional speakers for network stability.
yWhen the “Firmware update”pop-up appears on Music Flow
Player App, touch to start updating.
yIf you connected a speaker with a LAN cable and installed
other speakers additionally: If the speaker with frequent
sound breaking is not close enough with the cable connected
speaker, additionally install Bridge or other speaker in the
middle location between the speaker connected with LAN
cable and the speaker with sound breaking, and try again.
yEven if you connected speakers with MUSICow mesh
network, music sound breaks by ambient signal interference
causing Wi-Fi network defect. In this case, you can try to
change Mesh network channel of MUSICow system at the
[Settings àAdvanced settings àMesh Network Channel].
yWhen making connection, “Mesh network composition”may
appear and it takes about 30 seconds. This message appears
once in rst installation but appear again when you change
network environment.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 17 2015-07-27  4:23:59

Using Multi-Room
18
2
Using Multi-Room
Using the Bridge
1. Use as a root device
(wired to the home router)
When your home router is located far from speaker location to
be connected in wired mode:
aConnect the bridge to your home router with LAN cable.
bAccording to“Simple Setup Guide (Add Speakers)“, add
MUSICflow products to your home network.
a
b
Bridge
2. Use as a wireless extender
When you want to expand MUSICow mesh network coverage:
Preparation: Initial MUSICow product is connected to your
home router with LAN cable.
aAccording to“Simple Setup Guide (Add Speakers)“, add the
Bridge to your home network
bAccording to“Simple Setup Guide (Add Speakers)“, add
MUSICflow products to your home network.
a
b
Bridge
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 18 2015-07-27  4:24:00

Using Multi-Room 19
2
Using Multi-Room
Enjoying Multiple MUSICflow
Product
1. Home Cinema Mode
Simply add a LG MUSICow sound bar to your network and
synchronize it with your LG MUSICow speakers to enjoy a
home cinema system experience.
,Note
If you connect the MUSICow Speakers to your Home Cinema,
those speakers must be same model.
Requirement
yMUSICow Sound Bar x 1
yMUSICow Speaker x 2 (Same model)
yNetwork Bridge (optional)
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 19 2015-07-27  4:24:00

Using Multi-Room
20
2
Using Multi-Room
2. Grouping Mode
Speakers placed in separate rooms can play the same music or
dierent music based on your needs.
Synchronize your multi-room speakers together to play the
same song in every room.
Requirement
yMore than 2 MUSICow
yNetwork Bridge (optional)
3. L/R Stereo Mode
Set your speakers to stereo sound with Music Flow Player Apps
to enjoy movies and your favourite tracks.
Requirement
yMUSICow Speaker x 2
yNetwork Bridge
(optional)
3 Using External Device
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 20 2015-07-27  4:24:00