LG CT-29K36ET User manual

COLOR TV
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CHASSIS : MC-007A
MODEL:CT-29K36ET/NP/PT
MODEL:CT-29K37E/EX
MODEL:CT-29H36EN/ET
website:http://biz.LGservice.com
e-mail:http://www.LGEservice.com/techsup.html
All manuals and user guides at all-guides.com
all-guides.com

- 2 -
CONTENTS
Contents ................................................................................................................. 2
Safety Precautions ............................................................................................3
Specifications ..................................................................................................... 4
Control Descriptions ........................................................................................ 5
Disassembly Instructions ............................................................................. 8
Adjustment Instructions ............................................................................... 9
Exploded View .................................................................................................. 14
Exploded View Parts List..............................................................................15
Replacement Parts List ................................................................................ 18
SVC. Sheet ................................................................................................................
All manuals and user guides at all-guides.com

- 3 -
SAFETY PRECAUTIONS
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in
the Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to
prevent X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.
General Guidance
An lsolation Transformer should always be used during
the servicing of a receiver whose chassis is not isolated from
the AC power line. Use a transformer of adequate power rating
as this protects the technician from accidents resulting in
personal injury from electrical shocks.
It will also protect the receiver and it's components from being
damaged by accidental shorts of the circuitary that may be
inadvertently introduced during the service operation.
If any fuse (or Fusible Resistor) in this TV receiver is blown,
replace it with the specified.
When replacing a high wattage resistor (Oxide Metal Film
Resistor, over 1W), keep the resistor 10mm away from PCB.
Keep wires away from high voltage or high temperature parts.
Due to high vacuum and large surface area of picture tube,
extreme care should be used in handling the Picture Tube.
Do not lift the Picture tube by it's Neck.
X-RAY Radiation
Warning:
To determine the presence of high voltage, use an accurate
high impedance HV meter.
Adjust brightness, color, contrast controls to minimum.
Measure the high voltage.
The meter reading should indicate
23.5 ¡1.5KV: 14-19 inch, 26 ¡1.5KV: 19-21 inch,
29.0 ¡1.5KV: 25-29 inch, 30.0 ¡1.5KV: 32 inch
If the meter indication is out of tolerance, immediate service
and correction is required to prevent the possibility of
premature component failure.
Before returning the receiver to the customer,
always perform an AC leakage current check on the exposed
metallic parts of the cabinet, such as antennas, terminals, etc.,
to be sure the set is safe to operate without damage of
electrical shock.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source,
connect an electrical jumper across the two AC plug prongs.
Place the AC switch in the on positioin, connect one lead of
ohm-meter to the AC plug prongs tied together and touch other
ohm-meter lead in turn to each exposed metallic parts such as
antenna terminals, phone jacks, etc.
If the exposed metallic part has a return path to the chassis, the
measured resistance should be between 1MΩ and 5.2MΩ.
When the exposed metal has no return path to the chassis the
reading must be infinite.
An other abnormality exists that must be corrected before the
receiver is returned to the customer.
Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
and the exposed metallic parts.
Measure the AC voltage across the resistor using AC
voltmeter with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC
voltage measurements for each esposed metallic part. Any
voltage measured must not exceed 0.75 volt RMS which is
corresponds to 0.5mA.
In case any measurement is out of the limits sepcified, there is
possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.
Leakage Current Hot Check circuit
The source of X-RAY RADIATION in this TV receiver is the
High Voltage Section and the Picture Tube.
For continued X-RAY RADIATION protection, the
replacement tube must be the same type tube as specified in
the Replacement Parts List.
1.5 Kohm/10W
To Instrument's
exposed
METALLIC PARTS
Good Earth Ground
such as WATER PIPE,
CONDUIT etc.
AC Volt-meter
IMPORTANT SAFETY NOTICE
0.15uF
All manuals and user guides at all-guides.com

- 4 -
SPECIFICATIONS
Note : Specification and others are subject to change without notice for improvement.
¡Video input system:
PAL-B/G, D/K, I/I
SECAM-B/G, D/K/L/L’
NTSC M
NTSC 4.43(AV)
¡Intermediate Frequency (Unit : MHz)
VISION IF : 38.9MHz,33.9MHz(SECAM-L’)
COLOR IF : 34.47MHz(4.43)
35.32MHz(3.58) : NTSC-M
VIF-4.25000MHz
VIF-4.40625MHz
SOUND IF : 33.4MHz (B/G)
32.9MHz (I/I)
32.4MHz (D/K,L)
34.4MHz (M)
40.4MHz (L’)
¡Power requirement : 110~240V, 50/60Hz
¡Power consumption : 25”:125W
29”:135W
¡CPT : True Flat CPT(Flatron)
¡Tuning system :
FVS
100 Programme memory
200 Programme memory(For CHINA)
¡
Antenna input impedance : VHF/UHF 75 ohm, unbalanced
¡OSD (On Screen Display) : MENU Type
¡Voice coil impedance : 8 ohm
¡Sound output : 12W+12W
Dual/Stereo : A2/NICAM(Option)
¡External connection : Head Phone Jack
S-VIDEO in
A/V in :1 pair
Scart 1(Full)
A/V in/out
Scart 2(Half)+Audio out
A/V in/out
¡External In/Output
Audio-In:0.5Vrms¡3db,over 10Kohm
Audio-Out:0.5Vrms¡3db,below 1Kohm
Video-In/Out:1Vp-p¡3db,75ohm
R,G,B In:0.7Vp-p¡3db
¡Feature : Auto programme/Manual programme
SVM (Scanning Velocity Modulation)
Digital Eye
Digital Comb Filter
Auto Sleep
Dynamic Focus
Programme Editing
PSM (Picture Status Memory)
CTI
Double Window Teletext (TOP/FLOF)
Turbo Search, Picture & Sound
ACMS
ARC (Zoom 1/ZOOM 2, 16:9¡Œ4:3)
1 TUNER PIP(Double Window PIP)
Child Lock :
¡Tuning range
Band
VHF-Low
VHF-High
Hyper
UHF
S1'-S3', S1
S2-S10,
S11-S20
S21-S41
For TV For CATV
B/G
Ch2-4
Ch5-12
D/K
Ch1-5
Ch6-12
I/I
Ch4-13
NTSC
Ch2-13
Ch21-69 Ch14-69
In the Lock On state the TV can only be
operated by the Remote Controller.
If any button on the front panel is pressed,
"Child Lock" is displayed on the screen but
the button's function is not performed.
To cancel of this mode, select lock off with
menu button on remote controller only.
(): SECAM
Front or
Side
Back
All manuals and user guides at all-guides.com

- 5 -
DESCRIPTION OF CONTROLS
LISTI/II
MENU
ARC
EYE/
TEXT
TV/AV
PICTURE
SOUND
123
456
789
PSM
PLAY
REC REW P/STILL FF
STOP
0
SSM
POWER
MUTE
OK
SLEEP
REVEAL
TIME
Q.VIEW
MIX
VOL
PR
PR
VOL
M
i
T
U
R
B
O
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control handset, please install the bat-
teries. See the next page.
1. POWER
switches the set on from standby or off to standby.
2. MUTE
switches the sound on or off.
3. ARC (Aspect Ratio Control)
changes the picture format.
4. TV/AV
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
5. EYE/*(option)
switches the eye function on or off.
6. TURBO PICTURE BUTTON
selects Turbo picture.
TURBO SOUND BUTTON
selects Turbo sound.
7. D / E(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK
accepts your selection or displays the current mode.
8. NUMBER BUTTONS
switches the set on from standby or directly select a number.
9. PSM (Picture Status Memory)
recalls your preferred picture setting.
10. SSM (Sound Status Memory)
recalls your preferred sound setting.
1
2
3
5
4
6
8
7
9
10
(Without PIP)
11
12
15
17
16
18
14
All manuals and user guides at all-guides.com

- 6 -
11. I/II
selects the language during dual language broadcast.
selects the sound output (option).
12. LIST
displays the programme table.
13. PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/ -
selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
switches on or off the 9 or 4 sub pictures.
14. MENU
selects a menu.
15. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
16. SWAP or Q.VIEW
returns to the previously viewed programme.
17. SLEEP
sets the sleep timer.
18. VCR BUTTONS
control a LG video cassette recorder.
Note : In teletext mode, the PR +/ - ,SWAP and INPUT buttons are
used for teletext function.
Battery installation
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( and ) marked inside the compartment.
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
LISTI/II
MENU
ARC
PIP
TEXT
TV/AV
PICTURE
SOUND
123
456
789
PSM
PLAY
REC REW P/STILL FF
STOP
0
SSM
POWER
MUTE
OK
S
I
Z
E
S
T
I
L
L
P
O
S
I
T
I
O
N
9
/
4
P
I
P
SLEEP
REVEAL
TIME
MIX
PR SWAP
INPUT
VOL
PR
PR
VOL
M
PR
i
EYE/
T
U
R
B
O
11
12
13
15
17
16
18
14
(With PIP)
+
-
1
2
3
5
4
6
8
7
9
10
All manuals and user guides at all-guides.com
all-guides.com

- 7 -
!
Shown is a simplified representation of front or side panel.
Here shown may be somewhat different from your set.
POWER rMENU OK VOL PR VIDEO AUDIO !
1
POWER rMENU OK VOL PR VIDEO (L/MONO)-AUDIO-(R) !
234 8 10
10
10
11
11
11
12
6
1. MAIN POWER
switches the set on or off.
2. POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby
mode.
dims when the set is switched on.
3. REMOTE CONTROL SENSOR
4. MENU
selects a menu.
5. TV/AV
selects TV or AV mode.
clears the menu from the screen.
switches the set on from standby.
6. OK
accepts your selection or displays the current
mode.
7. (Function)
selects volume, EYE (option), picture items or
brief auto programme while the menus not dis-
play.
8. DD/ EE(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
FF/ GG(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
9. +/- (DD/EE)
adjusts the function or selects a programme.
switches the set on from standby.
10.AUDIO/VIDEO IN SOCKETS (AV3) (option)
Connect the audio/video out sockets of exter-
nal equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV) (option)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-VIDEO
VCR to the audio sockets as in AV3.
11.HEADPHONE SOCKET (option)
Connect the headphone plug to this socket.
12.EYE (option)
adjusts picture according to the surrounding
conditions.
1
POWER MENU OK VOL PR r
23 4 8 12
6
13410 11 12
68
v r TV/AV VIDEO AUDIO !
v r TV/AV VIDEO (L/MONO)-AUDIO-(R) !
VOL PR
-+
-+
1 2 37 10 11 12
5 9
1 2 3710 1211
5 9
Front panel
Side panel
VIDEO
(L/MONO)
I
AUDIO
I
(R)
!
VIDEO
AUDIO
VOL PR
2
!
10
11 S-VIDEO
VIDEO
(L/MONO)
I
AUDIO
I
(R)
All manuals and user guides at all-guides.com

- 8 -
Fig. 2-1
Fig. 2-2
CPT
PCB
Remove
Screws
STEREO
PCB
Main PCB
VCD
PCB
DISASSEMBLY INSTRUCTIONS
Important note
This set is disconnected from the power supply through the
converter transformer. An isolating transformer is necessary
for service operations on the primary side of the converter
transformer.
Back Cabinet Removal
Remove the screws residing on the back cabinet and carefully
separate the back cabinet from the front cabinet. (Fig. 2-1).
Chassis Assy Removal
Grasp both side of Frame and pull it backward smoothly.
Speaker Assy Removal
1. Remove P1651 and P1652 connector from Main2 (Power/Def./
Sound-Amp) Board.
2. Remove respective 6 screws for speaker on the front
cabinet. (Fig. 2-2).
CPT Removal
1. Pull out the CPT board from the CPT neck.
2. Place the front cabinet on soft material not to mar the front
surface or damage control knobs.
3. Remove 4 screws securing the picture tube mounting
brackets to the front cabinet.
4. Carefully separate CPT from the front cabinet.
PICTURE TUBE HANDLING CAUTION
Due to high vacuum and large surface area of picture tube, great
care must be exercised when handling picture tube. Always lift
picture tube by grasping it firmly around faceplate.
NEVER LIFT TUBE BY ITS NECK! The picture tube must not be
scratched or subjected to excessive pressure as fracture of
glass may result in an implosion of considerable violence which
can cause personal injury or property damage.
All manuals and user guides at all-guides.com

- 9 -
¡Safety Precautions
1. It is safe to adjust after using insulating transformer between
the power supply line and chassis input to prevent the risk of
electric shock and protect the instrument.
2. Never disconnect leads while the TV receiver is on.
3. Don't short any portion of circuits while power is on.
4. The adjustment must be done by the correct appliances.
5. Unless otherwise noted, set the line voltage to 230Vac¡
10%, 50Hz.
5. The adjustment of TVshould be performed after warming up
for 15 minutes.
¡Test Equipment required
1. RF signal generator (with pattern generator)
2. DC Power Supply
3. Multimeter (volt meter)
4. Oscilloscope
5. Color analyzer
¡ PIF (Picture Intermediate Frequency) Adjustment
1) Connect the measuring equipment to the Main Board as
shown in Fig.1.
2) Set RF frequency and output level of RF SIGNAL
GENERATOR as shown Table 1.
3) Turn off S1 and S3 and on S2.
4) Adjust L104 so that the DC voltage may be 2.4¡0.05Vdc.
(Table 1)
¡L’ VCO Adjustment (For SECAM-L’ MODEL)
1) Connect the measuring equipment to the Main Board as
shown in Fig.1.
2) Set RF frequency and output level of RF SIGNAL
GENERATOR as shown Table 1.
3) Turn on S1,S3 and off S2.
2) Adjust VR122 so that the DC Voltage may be 2.4¡0.05Vdc.
¡ RF AGC (Automatic Gain Control) Adjustment
1) Input PAL-B/G 05 CH.
2) Connect Multimeter to TP2(J15),AGC adjustment point.
3) Adjust VR121 until the voltage of Multimeter becomes
2.5¡0.1V.
¡Screen Voltage Adjustment
1) Tune the RF Modulator to receive a PAL or SECAM signal.
2) Press MIX button on remote controller for Service to get into
the Screen Adjust Mode.
3) Adhere the Color Analyzer on the White window of CPT
face.
4) Adjust Screen Volume of FBT so that the luminance of White
window is 12¡1 FL.
¡Focus Adjustment
1) Tune the TV set to receive a digital pattern.
2) Adjust the upper Focus volume of FBT for the best focus of
vertical line B.
3) Adjust the lower Focus volume of FBT for the best focus of
area A.
4) Repeat above step 2) and 3) for the best overall focus.
IC101
TDA4470
TP1(VCO)
IC102(KI7805)
22 7
13
14
1
0.01uF
JP1
L104
9V
Power-
Supply
V Multimeter or Oscilloscope
JP2
38.9MHz
34.25MHz (B/G,D/K,I,L)
(SECAM-L')
100 ohm
S1
5V
4.7 Kohm
S3
S2 JP3
100 ohm Q122 VR122
R108 R144
Test Point : TP1
Adjust : L104
Test Point : TP1
Adjust : VR122
Frequency
38.9MHz
34.25MHz
System
B/G,D/K/I,SECAM-L
SECAM-L’
Modulation
OFF
OFF
Output level
10mVp-p
10mVp-p
Adjust
L104
VR122
Fig. 1 : Connection Diagram of Equipment for PIF Adjustment
ADJUSTMENT INSTRUCTIONS
Test Point : TP 2(J15)
Adjust : VR121
Test Point : CPT Face
Adjust : Screen Control of FBT
Test Point : Observing Display
Adjust : Focus control of FBT
All manuals and user guides at all-guides.com

- 10 -
¡Deflection Data Adjustment (Line SVC-2)
NOTE : How to enter into the Line Service Mode with a remocon.
1.Power off.
2.Press the Red button.
3.Press the Green button.
4.Press the Yellow button.
5.Press the Cyan button.
6.Press the OK button.
7.Power On.
1. Preparation for Deflection Adjustment
1) At SVC mode, press the Yellow colored button the SVC
remocon.
And then,deflection data adjustment OSD(SVC2 mode) will
be displayed.
2) Press Channel UP/DOWN button for desirous function
Adjustment.
3) Press Volume UP/DOWN button to adjust the data.
4) Tune the TV set to receive a PAL B/G Digital pattern.
VL (Vertical Linearity)
Adjust so that the boundary line between upper and lower
half is in accord with geometric horizontal center of the CPT.
VA (Vertical Amplitude)
Adjust so that the circle of a digital circle pattern may be
located within the effective screen of the CPT.
SC (Vertical “S” Correction)
Adjust so that all distance between each horizontal lines
are to be the same.
VS (Vertical Shift)
Adjust so that the horizontal center line of a digital circle
pattern is in accord with geometric horizontal center of
the CPT.
HS (Horizontal Shift)
Adjust so that the vertical center line of a digital circle pattern
is in accord with geometric vertical center of the CPT.
EW (Horizontal Width)
Adjust to that a digital circle pattern looks like exact circle.
EP (East-west Parabolar)
Adjust so that middle portion of the outermost left and right
vertical line looks like parallel with vertical lines of the CPT.
EC (East-west Coner)
Adjust so that the vertical line at every 4 corners of the
screen looks like parallel with the vertical lines of the CPT.
ET (East-west Trapezium)
Adjust to make the length of top horizontal line same with
it of the bottom horizontal line.
POP (POP Position)
Adjust until the distance between POP and main picture
becomes about 1mm.
(Table 2)
¡White Balance Adjustment.(LINE SVC 1)
NOTE : This adjustment should be performed after screen
voltage adjustment.
1) Tune the TV set to receive an 100% white pattern.
2) Press the Yellow button on remote controller in the SVC
Mode.
3) Press PSM (RED) button on remote controller. (Standard
picture)
4) Press PR+ or PR- button for desirous function adjustment.
5) Adjust Low Light status of CR and CB with VOL+ or VOL-
at CG:50 until X=268
¡8,Y=273¡ 8.
6) Adjust High Light status of RG and BGB with VOL+ or
VOL- at CG:370 until X=268
¡8,Y=273¡ 8.
7) Repeat above step 5) and 6) until each status of High Light
and Low Light for X=288
¡8,Y=295¡ 8 with color
analyzer(color temperature 9000
o
K).
b
AB
Fig. 2
Menu
VS
VA
VL
SC
HS
EW
ET
EP
ES
EC
POP P
0600H~0900H
0050H~00CFH
0025H~00BFH
0000H~009FH
0000H~003FH
0400H~0EFFH
0700H~08FFH
06E0H~0840H
06A0H~0AFFH
0790H~08E0H
0790H~08E0H
07D2
0095
0001
00D9
001E
0A9D
07FF
0787
0815
0850
000B
Range 29” Flat 29” S-Flat
All manuals and user guides at all-guides.com

- 11 -
(Table 3)
¡SVC Data & PSM,SSM Data.
Table 1. ABL Data (LINE SVC-3)
Table 2. SOUND PRE-SCALER (LINE SVC-4)
Table 3. PSM Data
Menu
DVCO
IBRM
WDRM
BCLTH
BCLTM
BCLGA
SVGA
SVDEL
SVD1
LDLY
HBST
HBSO
0~1FFH
0~3FFH
0~7FFH
0~1FFH
0~1FFH
0~01FF
0~01FF
00C8
0190
0065
000B
0007
0008
0005
0003
0001
00F0
0158
Range 29” Flat 29” S-Flat
Menu
FP
NP
SP
S1 VOL
S2 VOL
0~127
0~127
0~127
0~127
0~127
0011
0045
001E
0042
0042
Range DATA
Mode
CONTRAST
BRIGHT
COLOR
SHARPNESS
90
50
50
50
100
55
60
60
60
60
40
40
50
60
40
30
STANDARD DYNAMIC MILD GAME
Menu
CR
CG
CB
RG
GG
BG
0 ~ 511
0 ~ 511
0 ~ 511
0 ~ 511
0 ~ 511
0 ~ 511
50
50
50
370
370
370
Range DATA
All manuals and user guides at all-guides.com
all-guides.com

¡OPTION Adjustment (LINE-SERVICE OPTION)
Table 4. OPTION Function
- 12 -
OPTION
GAME
TEXT
TOP
ACMS
CH+AU
EYE
TURBO
SCART
A2 ST
I II SV
MONO
VOL
H-PH
DGS
TILT
200PRO
AV2
HOTEL
KEY
SYS
M-VOL
OSD
T-LAN
1
GAME
TEXT
TOP
China,Australia
EYE
Turbo Search
SCART
STEREO
I/II
MONO
Middle East Africa,India VOL.
H/Phone
Degaussing
TILT
China Only
Back:JACK(2EA)
HOTEL
0
X
X
X
Australia Only
X
X
X
X
X
X
Normal VOL.
X
X
Back:JACK(1EA)
X
Option 1
Option 2
Option 3
Option 4
Menu
All manuals and user guides at all-guides.com

- 13 -
MEMO
All manuals and user guides at all-guides.com

913 150 153 510
170
112
943
400
P801
540
530
520
120 104
300
700
330
320
310
EXPLODED VIEW:29K36/37
- 14 -
All manuals and user guides at all-guides.com

- 15 -
EXPLODED VIEW PARTS LIST
LOCA. NO PART NO DESCRIPTIONS
104 343-B52A SUPPORTER,PCB
112 6341V29002A CPT ASSY,29”,PA2,D/TINT,NORTH
6341V29002B CPT ASSY,29”,PA2,D/TINT,SOUTH
2426GF120CF CPT,29”
2426GF120EA CPT,29” LGEMT
2426GF120CK CPT,29” DRAGON
120 120-C77G SPEAKER,C122P02K1459 8OHM 10
150 6140VC2001B COIL,DEGAUSSING CU 29” 60T 8.7 OHM
153 6150Z-1043M DY,DC29SPPA2
170 170-844J CPT EARTH,29” 96T 2LUG 2P HUG .
300 3091V00161J CABINET ASSY
3091V00161L CABINET ASSY *RANKINE
3091V00161N CABINET ASSY CKA LOCAL
310 5020V00296A BUTTON,CONTROL 4KEY
320 320-062H SPRING,COIL
330 5020V00297A BUTTON,POWER
400 3809V00119M BACK COVER ASSY(1-SC,1-PH)
3809V00119J BACK COVER ASSY(2-PH)
3809V00119K BACK COVER ASSY *RANKINE
510 6871VSM728A PWB ASSY,CPT 007A W/O SVM
6871VSM820B PWB ASSY,CPT CKD
520 6871VMM618J PWB ASSY,MAIN 29K36PT(W/PIP,TXT)
6871VMM618D PWB ASSY,MAIN 29K36ET(W/O PIP,W/TXT)
6871VMM736E PWB ASSY,MAIN 29K36EN
6871VMM618G PWB ASSY,MAIN 29K37EX
6871VMM635D PWB ASSY,MAIN KCT29K37E
6871VMM635K PWB ASSY,MAIN KCT29K36NP
530 6871VSM588C PWB ASSY,007A W/PIP,SCART OPT.
6871VSM819A PWB ASSY,007A VCD(W/O PIP)
540 6871VSM589A PWB ASSY,RF ST(W/H_PHONE)
6871VSM589B PWB ASSY,AV ST(W/H-PHONE)
700 0IGL120104A IC,CDS SENSOR MODULE(P1201-04)
913 332-229J SCREW HEXAGON HEAD SPECIAL
943 1PTF0403116 SCREW,TAP TITE D4.0 L16.0
P801 174-225H CORD,POWER(L4=350MM)
174-009Q POWER,CORD
174-222Q POWER,CORD ASSY(L=2200MM)
The components identified by mark is
critical for safety.
Replace only with part number specified.
All manuals and user guides at all-guides.com

- 16 -
913 150 153 510
170
112
943
400
P801
540
530
520
120 104
300
700
330
320
310
EXPLODED VIEW:29H36
All manuals and user guides at all-guides.com
all-guides.com

- 17 -
EXPLODED VIEW PARTS LIST
LOCA. NO PART NO DESCRIPTIONS
112 6341V29002A CPT ASSY,29”,PA2,D/TINT,SOUTH
6341V29002B CPT ASSY,29”,PA2,D/TINT,NORTH
2426GF120CK CPT,29”
2426GF120EA CPT,29” LGEMT
120 120-C77G SPEAKER,C122P02K1459 8OHM 10
150 6140VC2001B COIL,DEGAUSSING CU 29” 60TURN 8.7 OHM .
153 6150Z-1043M DY,DC29SPPA2
170 170-844J CPT EARTH,29” 96T 2LUG 2P HUG
300 3091V00216P CABINET ASSY
3091V00216R CABINET ASSY CKD LOCAL
310 5020V00121A BUTTON,CONTROL
320 320-075B SPRING,KNOB
330 5020V00120A BUTTON,POWER
400 3809V00125R BACK COVER ASSY(2-PHONE)
3809V00125T BACK COVER ASSY(1-PH,1-SC)
501 4810V00296A BRACKET,MAIN
510 6871VSM728A PWB ASSY,CPT 007A W/O SVM,STV5109 SET
6871VSM820A PWB ASSY,CPT CKD
520 6871VMM618C PWB ASSY,MAIN 007A CT-29H36ET
6871VMM635A PWB ASSY,MAIN 007A KCT29H36EN
6871VMM736D PWB ASSY,MAIN 007A KCT29H36N
530 6871VSM819A PWB ASSY,SUB 007A VCD W/O (PIP,SVHS & S
540 6871VSM589C PWB ASSY,AUDIO 007A RF ST. W/O HP,W/O G
550 6871VSM705A PWB ASSY,POWER 007A H36 TOOL
6871VSM784A PWB ASSY,POWER 007A H36 TOOL,CKD
560 6871VSM704A PWB ASSY,CONT MC007A, H36 TOOL
6871VSM782A PWB ASSY,CONT MC007A, H36 TOOL,CKD
700 0IGL120104A IC,CDS SENSOR MODULE(P1201-04)
913 332-229G SCREW,HEXAGON HEAD(L:40,D:22)
943 1PTF0403116 SCREW,TAP TITE D4.0 L16.0
P801 174-009Q POWER,CORD
The components identified by mark is
critical for safety.
Replace only with part number specified.
All manuals and user guides at all-guides.com

- 18 -
REPLACEMENT PARTS LIST
LOCA. NO PART NO DESCRIPTION
D412
D601
D602
D802
D803
D804
D857
D858
D861
D863
D864
D865
D901
D902
D903
D904
D905
D906
D907
DB801
DP01
DP02
DP03
DV01
DV02
DV03
LD01
LD1101
ZD01
ZDN01
ZD101
ZD201
ZD301
ZD302
ZD303
ZD401
ZD402
ZD851
ZD901
Q02
Q03
Q04
Q05
Q06
Q121
Q122
Q123
Q124
Q125
Q126
Q201
0DD414809ED
0DD414809ED
0DD414809ED
0DR060009AA
0DD100009AM
0DD414809ED
0DD414809ED
0DD200009AH
0DR060009AA
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD400309AD
0DD414809ED
0DD414809ED
0DD414809ED
0DD560000AA
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
4930V00048A
4930V00048A
0DZ360009BC
0DZ820009AH
0DZ330009BA
0DZ330009CC
0DZ180009BE
0DZ560009AH
0DZ180009BE
0DZ510009AB
0DZ510009AB
0DZ510009AB
0DZ180009BE
0TR945009AA
0TR102009AB
0TR945009AA
0TR102009AB
0TR126609AA
0TR945009AA
0TR945009AA
0TR733009AA
0TR945009AA
0TR319709AB
0TR945009AA
0TR733009AA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,RECTIFIER TVR06J TP
DIODE,RECTIFIER EU1ZV(1)
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,RECTIFIER RU2AMV(1)
DIODE,RECTIFIER TVR06J TP
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,RECTIFIER IN4003A
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,RECTIFIER D5SB60 BRIDGE(5A/600V)
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
HOLDER DIODE,LED ASSY
HOLDER DIODE,LED ASSY
DIODE,ZENER MTZJ3.6B TP ROHM-K
DIODE,ZENER MTZJ8.2B TP ROHM-K
DIODE,ZENER HZT33(TP) HITACHI
DIODE,ZENER MTZJ3.3B TP ROHM-K
DIODE,ZENER GDZJ18B TP GRANDE
DIODE,ZENER GDZJ5.6B TP GRANDE
DIODE,ZENER GDZJ18B TP GRANDE
DIODE,ZENER MTZ5.1B,TP(52MM),R
DIODE,ZENER MTZ5.1B,TP(52MM),R
DIODE,ZENER MTZ5.1B,TP(52MM),R
DIODE,ZENER GDZJ18B TP GRANDE
TR,KSC945C-Y TP SAMSUNG
TR,KRC102M,TP(KRC1202),KEC
TR,KSC945C-Y TP SAMSUNG
TR,KRC102M,TP(KRC1202),KEC
TR,KTA1266-TP-Y (KTA1015) KEC
TR,KSC945C-Y TP SAMSUNG
TR,KSC945C-Y TP SAMSUNG
TR,KSA733C-Y TP SAMSUNG TO-92
TR,KSC945C-Y TP SAMSUNG
TR,KTC3197,TP(KTC388A),KEC
TR,KSC945C-Y TP SAMSUNG
TR,KSA733C-Y TP SAMSUNG TO-92
LOCA. NO PART NO DESCRIPTION
D850
ICP01
ICN01
“
IC01
“
IC02
ICV01
ICP02
ICN02
ICV02
IC03
ICN03
IC04
ICN05
ICP101
IC101
IC102
ICP102
ICP103
IC301
IC302
IC601
IC801
IC802
IC803
IC851
IC853
IC855
IC856
IC901
Q07
Q08
D01
D02
D03
D04
D101
D121
D122
D301
D302
D401
D402
D403
D404
D405
D406
D407
D408
0ISK100300A
0IIT312000A
0IIT341000J
0IIT340050A
0ICTMIH002A
0ICTMIH001A
0IAL241610B
0IIT312000A
0IFA754207A
0ISG282200A
0IFA754207A
0IFA752700A
0IKE780500Q
0ISG111733B
0IFA753307A
0ISO204000A
0ITF447000A
0IKE780500Q
0ISM948900A
0ISG111733B
0ISA784070A
0IKE455800E
0ISA428200A
0ISK665613B
0ILI817000G
0ILI817000G
0IKE780500Q
0ISH092100B
0ISS278050A
0ISK125120A
0ISG510900A
0IFA270000A
0IFA270000A
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD859009AA
0DD859009AA
0DD150009CE
0DD247109AA
0DD410000AC
0DD410000AD
0DD150009CA
0DR150009AB
0DR150009AB
0DR150009AB
0DD414809ED
0DD100009AE
BIC,SLA1003 SIP12 BK DIODE MODULE(
IC,VDP3120B 64P SDIP BK VCD IC (5
IC,MSP3410D-C5 52P SDIP BK MULTI
IC,MSP3400D-PO-C5 52PIN
IC,SDA5525-A004 W/O TXT
IC,SDA5555-A006 W/ TXT
IC,AT24C16-10PC-2.7 8PIN DIP ST E
IC,VDP3120B 64P SDIP BK VCD IC (5
IC,KA75420ZTA(KA7542ZTA) 3P,TO-92
IC,TDA2822M 8D DUAL AUDIO AMP(1W)
IC,KA75420ZTA(KA7542ZTA) 3P,TO-92
IC,KA75270Z 3 TP RE-SET IC MC-007
IC,KIA7805API 3P TO-220 ST REGULA
IC,LD1117V33C 3SIP ST REGULATOR
IC,KA75330ZTA(KA7533ZTA) 3P,TO-92
IC,CXA2040AQ 32P,QFP BK IIC BUS V
IC,TDA4470M 28P,SDIP BK VIF+SIF
IC,KIA7805API 3P TO-220 ST REGULA
IC,SDA9489 28PIN SOP TP PIP
IC,LD1117V33C 3SIP ST REGULATOR
IC,LA7840 7S VERTICAL
IC,KIA4558 8DIP DUAL OP AMP
IC,LA4282 12S 2CHX10W AUDIO AMP
IC,STR-F6656(LF1352) 5P,SIP BK ST
IC,LTV817M-VB 4P,DIP BK PHOTO COU
IC,LTV817M-VB 4P,DIP BK PHOTO COU
IC,KIA7805API 3P TO-220 ST REGULA
IC,PQ09RD21 4SIP ST REGULATOR
IC,KA278R05 4P,TO-220F BK LOW DRO
IC,SE125N(LF12) 125V ERROR AMP
IC,STV5109 15SIP ST RGB DRIVE
IC,2N7000TA TO-92, 3P TP LEVEL SH
IC,2N7000TA TO-92, 3P TP LEVEL SH
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,1N4148 TA
DIODE,SILICON MA859
DIODE,SILICON MA859
DIODE,RECTIFIER GP15J TP(1.5A/600V)
DIODE,DETECTOR 1S2471 SW TP,ROHM
DIODE,RECTIFIER RU4DS,LF-L1
DIODE,RECTIFIER RU4AM,LF-L1
DIODE,RECTIFIER RGP15J,TP(52MM)
DIODE,RECTIFIER RGP15G TP
DIODE,RECTIFIER RGP15G TP
DIODE,RECTIFIER RGP15G TP
DIODE,1N4148 TA
DIODE,RECTIFIER RU1A V(1)
IC
DIODE
The components identified by mark are
critical for safety.
Replace only with part number specified.
TRANSISTOR
All manuals and user guides at all-guides.com

- 19 -
LOCA. NO PART NO DESCRIPTION
Q221
Q301
Q303
Q331
Q401
Q402
Q601
Q853
Q854
Q855
Q856
Q857
Q901
Q1101
QN01
QN02
QP01
QP02
QP03
QP04
QP05
QP06
QP07
QP08
QP09
QP10
QP11
QP12
QP13
QP14
QP15
QP104
QP105
QP106
QV01
QV02
QV03
QV07
QV08
QV09
QV10
QV11
QV12
QV13
QV14
QV15
C01
C02
C03
C04
0TR733009AA
0TR945009AA
0TR127409AB
0TR205900AB
0TR258100AA
0TR223800AA
0TR733009AA
0TR945009AA
0TR102009AB
0TR102409AB
0TR945009AA
0TR320209AA
0TR126609AA
0TR733009AA
0TR150400BA
0TR150400BA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR150400BA
0TR387500AA
0TR387500AA
0TR150400BA
0CE476DD618
0CN1030F679
0CX6200K409
0CX6200K409
TR,KSA733C-Y TP SAMSUNG TO-92
TR,KSC945C-Y TP SAMSUNG
TR,KTA1274-Y TO-92L TP KEC
TR,KTD2059-Y TO-220IS KEC
TR,2SD2581 BK SANYO TO3P
TR,KTC2238A-Y
TR,KSA733C-Y TP SAMSUNG TO-92
TR,KSC945C-Y TP SAMSUNG
TR,KRC102M,TP(KRC1202),KEC
TR,KTA1024-Y (KTA949) TP KEC
TR,KSC945C-Y TP SAMSUNG
TR,KTC3202-TP-Y (KTC1959)KEC
TR,KTA1266-TP-Y (KTA1015) KEC
TR,KSA733C-Y TP SAMSUNG TO-92
TR,CHIP 2SA1504S(ASY) KEC
TR,CHIP 2SA1504S(ASY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SA1504S(ASY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SA1504S(ASY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SA1504S(ASY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SA1504S(ASY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SA1504S(ASY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SA1504S(ASY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SC3875S(ALY) KEC
TR,CHIP 2SA1504S(ASY) KEC
47UF STD 10V M FL TP5
10000P 16V M Y TA52
62P 50V J SL TA52
62P 50V J SL TA52
LOCA. NO PART NO DESCRIPTION
C05
C06
C08
C09
C10
C11
C12
C14
C17
C18
C19
C20
C21
C22
C24
C25
C26
C27
C29
C30
C31
C32
C33
C34
C101
C103
C104
C105
C106
C108
C109
C110
C112
C113
C114
C115
C121
C122
C123
C124
C125
C126
C127
C128
C129
C130
C131
C132
C134
C135
C136
C137
0CN1030F679
0CE107DD618
0CN1030F679
0CN1030F679
0CE106DK618
0CE106DK618
181-007D
0CN1040K949
0CN1010K519
0CE476DF618
0CE475DK618
0CE476DD618
0CE107DD618
0CN1030F679
0CE225DK618
0CN1020K519
0CC3300K415
0CC3300K415
0CN1030F679
0CE106DK618
0CE106DK618
0CN1030F679
0CN1030F679
0CN1030F679
0CE476DK618
0CN1030F679
0CE227DD618
0CX3300K409
0CX3300K409
0CE106DF618
0CE335DK618
0CN1040K949
0CN1020K519
0CE476DD618
0CN1030F679
0CN1030F679
0CN1030F679
0CN1030F679
0CN1030F679
0CN1030F679
0CN1040K949
0CN1030F679
181-007H
0CE106DF618
0CN1030F679
0CSZVTA001F
0CN1030F679
0CN1030F679
0CE476DD618
0CN1040K949
0CE226DF618
181-007H
10000P 16V M Y TA52
100UF STD 10V M FL TP5
10000P 16V M Y TA52
10000P 16V M Y TA52
10UF STD 50V M FL TP5
10UF STD 50V M FL TP5
ECQ-V1H154JL3(TR)50V 0.1
0.1M 50V Z F TA52
100P 50V K B TA52
47UF STD 16V M FL TP5
4.7000UF STD 50V M FL
47UF STD 10V M FL TP5
100UF STD 10V M FL TP5
10000P 16V M Y TA52
2.2000UF STD 50V M FL
1000P 50V K B TA52
33P 50V J NP0
33P 50V J NP0
10000P 16V M Y TA52
10UF STD 50V M FL TP5
10UF STD 50V M FL TP5
10000P 16V M Y TA52
10000P 16V M Y TA52
10000P 16V M Y TA52
47UF STD 50V M FL TP5
10000P 16V M Y TA52
220UF STD 10V M FL TP5
33P 50V J SL TA52
33P 50V J SL TA52
10UF STD 16V M FL TP5
3.3000UF STD 50V M FL
0.1M 50V Z F TA52
1000P 50V K B TA52
47UF STD 10V M FL TP5
10000P 16V M Y TA52
10000P 16V M Y TA52
10000P 16V M Y TA52
10000P 16V M Y TA52
10000P 16V M Y TA52
10000P 16V M Y TA52
0.1M 50V Z F TA52
10000P 16V M Y TA52
ECQ-V1H474JL3(TR)50V 0.4
10UF STD 16V M FL TP5
10000P 16V M Y TA52
TAP684K035BRS(AMMO)35V 0.68UFK
10000P 16V M Y TA52
10000P 16V M Y TA52
47UF STD 10V M FL TP5
0.1M 50V Z F TA52
22UF STD 16V M FL TP5
ECQ-V1H474JL3(TR)50V 0.4
CAPACITOR
For Capacitor & Resistors,
the charactors at 2nd and 3rd
digit in the P/No. means as
follows;
CC, CX, CK, CN : Ceramic
CQ : Polyestor
CE : Electrolytic
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RF : Fusible
The components identified by mark are
critical for safety.
Replace only with part number specified.
All manuals and user guides at all-guides.com

- 20 -
LOCA. NO PART NO DESCRIPTION
C138
C139
C140
C141
C147
C148
C149
C183
C201
C208
C209
C221
C222
C229
C230
C241
C244
C245
C302
C303
C304
C305
C306
C307
C308
C309
C310
C311
C401
C402
C403
C405
C406
C407
C408
C409
C410
C411
C412
C413
C414
C415
C416
C417
C419
C420
C421
C422
C517
C518
C519
C520
0CN1040K949
0CE104DK618
0CN1030F679
0CE107DD618
0CX4700K409
0CX4700K409
0CE106DF618
0CE108DF618
0CE227DF618
0CE226DF618
0CE226DF618
0CE476DF618
0CE227DF618
0CE226DF618
0CE226DF618
0CX4700K409
0CN1010K519
0CN1010K519
0CQ3341N401
0CE107BK618
0CQ6821N509
0CQ1021N509
0CQ3931N509
0CQ1031N509
0CE476DJ618
0CN4710K519
0CQ1031N509
0CQ1031N509
0CE474DK618
0CE475DK618
0CK2220W515
181-834B
181-091G
0CQZVBK004B
0CE5651K652
0CK2220W515
0CE106BR618
181-013G
0CK6810W515
0CE107DJ618
181-091P
0CE108DH618
181-009R
0CK2710W515
0CE108BH618
181-010B
0CK2710W515
0CE106DR618
0CQ1531N509
0CQ1531N509
0CQ1531N509
0CN1030F679
0.1M 50V Z F TA52
0.1000UF STD 50V M FL TP5
10000P 16V M Y TA52
100UF STD 10V M FL TP5
47P 50V J SL TA52
47P 50V J SL TA52
10UF STD 16V M FL TP5
1000UF STD 16V M FL TP5
220UF STD 16V M FL TP5
22UF STD 16V M FL TP5
22UF STD 16V M FL TP5
47UF STD 16V M FL TP5
220UF STD 16V M FL TP5
22UF STD 16V M FL TP5
22UF STD 16V M FL TP5
47P 50V J SL TA52
100P 50V K B TA52
100P 50V K B TA52
0.33U 100V J POLY
100UF KME 50V M FL TP5
0.0068U 100V K POLY
0.001U 100V K POLY
0.0390UF 100V K PE TP
0.01U 100V K POLY
47UF STD 35V M FL TP5
470P 50V K B TA52
0.01U 100V K POLY
0.01U 100V K POLY
0.4700UF STD 50V M FL
4.7000UF STD 50V M FL
2200P 500V K B
MPP 1600V 0.018UF J
DE0907-486 R 471K 2KV
0.027UF D 630V J
5.6000UF SM 50V M
2200P 500V K B
10UF KME 250V M
MPP 200V 0.5UF J
680P 500V K B
100UF STD 35V M FL TP5
1KV SL 271J TP5
1000UF STD 25V M FL TP5
PP 200V 0.022UF K
270P 500V K B
1000UF KME 25V M FL TP5
PP 400V 0.056UF J
270P 500V K B
10UF STD 250V M FL TP5
0.015U 100V K POLY
0.015U 100V K POLY
0.015U 100V K POLY
10000P 16V M Y TA52
LOCA. NO PART NO DESCRIPTION
C601
C602
C603
C604
C605
C606
C607
C608
C609
C610
C611
C612
C613
C614
C802
C803
C804
C806
C807
C808
C809
C811
C813
C814
C815
C817
C854
C855
C856
C857
C858
C859
C860
C861
C862
C863
C864
C866
C867
C868
C870
C871
C872
C873
C901
C902
C903
“
C904
C905
C906
C907
0CE107DH618
0CE684DK618
0CQ5621N509
0CE107DH618
0CE684DK618
0CQ5621N509
0CE107DH618
0CQ1041N509
0CE477DJ618
0CQ1041N509
0CE477DJ618
0CN1040K949
0CE477DK618
0CE477DH618
0CQZVBK002D
181-091U
0CE337KV6A0
181-011C
181-091G
0CE107BJ618
0CK1020K515
181-120K
0CK10201515
0CQZVBK002A
181-091Q
0CK22201510
0CE107DF618
0CE107DD618
0CK47101515
0CE228DF618
0CE477DF618
0CK47101515
0CE108BF618
0CE108BF618
0CE475CK636
181-091Q
0CE108DK61A
0CK4710W515
0CE227DK618
0CE476DF618
181-091C
0CE227DP650
0CE107CP618
0CQ1041N509
0CX1500K409
0CX5R60K509
0CX2200K409
0CX3900K409
0CE107DF618
0CN2230H949
0CE106DR618
0CQZVBK002A
100UF STD 25V M FL TP5
0.6800UF STD 50V M FL
0.0056U 100V K POLY
100UF STD 25V M FL TP5
0.6800UF STD 50V M FL
0.0056U 100V K POLY
100UF STD 25V M FL TP5
0.1U 100V K POLY
470UF STD 35V M FL TP5
0.1U 100V K POLY
470UF STD 35V M FL TP5
0.1M 50V Z F TA52
470UF STD 50V M FL TP5
470UF STD 25V M FL TP5
A.C 275V 0.47UF K (S=22.5)
2KV R 221K TP7.5
330UF SLT 450V M VNSN BULK
PP 1600V 0.0015UF J
DE0907-486 R 471K 2KV TP7.5
100UF KME 35V M FL TP5
1000P 50V K B
2200PF 4KV M E FMTW
1000P 1KV K B TS
A.C 275V 0.1UF M (S=15)
1KV R 471K TP5
2200P 1KV K B S
100UF STD 16V M FL TP5
100UF STD 10V M FL TP5
470P 1KV K B TS
2200UF STD 16V M FL TP5
470UF STD 16V M FL TP5
470P 1KV K B TS
1000UF KME 16V M FL TP5
1000UF KME 16V M FL TP5
4.7UF SHL,SD 50V M FM5
1KV R 471K TP5
1000UF STD 50V M FL TP7.5
470PF 500V K B TR
220UF STD 50V M FL TP5
47UF STD 16V M FL TP5
DE0705-979 R 471K 1KV TP5
220UF STD 160V M FM7.5 BULK
100U SHL 160V M FL TP5
0.1U 100V K POLY
15P 50V J SL TA52
5.6P 50V K SL TA52
22P 50V J SL TA52
39P 50V J SL TA52
100UF STD 16V M FL TP5
22000P 25V Z FTA52
10UF STD 250V M FL TP5
A.C 275V 0.1UF M (S=15)
For Capacitor & Resistors,
the charactors at 2nd and 3rd
digit in the P/No. means as
follows;
CC, CX, CK, CN : Ceramic
CQ : Polyestor
CE : Electrolytic
RD : Carbon Film
RS : Metal Oxide Film
RN : Metal Film
RF : Fusible
The components identified by mark are
critical for safety.
Replace only with part number specified.
All manuals and user guides at all-guides.com