LG FT018TGES User manual

OWNER'S MANUAL
WASHING MACHINE
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
MFL71774488
Rev.02_041622
www.lg.com
Copyright © 2021-2022 LG Electronics Inc. AllRights Reserved.
global_main.book.book Page 1 Tuesday, March 23, 2021 3:42 PM
FT018TGES

TABLE OF CONTENTS
This manual may contain images or
content that may be different from the
model you purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE...........................................................3
WARNING............................................................................................................3
INSTALLATION
Parts and Specifications ....................................................................................8
Installation Place Requirements ....................................................................10
Stacking Mini Washer and Main Washer ......................................................11
Connecting the Water Supply Hose...............................................................13
Installing the Drain Hose ................................................................................14
Levelling the Appliance ...................................................................................15
OPERATION
Operation Overview.........................................................................................18
Preparing the Wash Load ...............................................................................18
Adding Detergents and Softeners .................................................................19
Control Panel and Programme Table............................................................22
Extra Options and Functions ..........................................................................26
SMART FUNCTIONS
Using LG ThinQ Application............................................................................27
Smart Diagnosis ...............................................................................................29
MAINTENANCE
Cleaning After Every Wash..............................................................................31
Cleaning the Appliance Periodically ..............................................................31
TROUBLESHOOTING
Before Calling for Service................................................................................34
global_main.book.book Page 2 Tuesday, March 23, 2021 3:42 PM

3
SAFETY INSTRUCTIONS
ENGLISH
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
The following safety guidelines are intended to prevent unforeseen
risks or damage from unsafe or incorrect operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as
described below.
Safety Messages
WARNING
WARNING
• To reduce the risk of explosion, fire, death, electric shock, injury or
scalding to persons when using this product, follow basic
precautions, including the following:
Technical Safety
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
This symbol is displayed to indicate matters and operations
that can cause risk. Read the part with this symbol carefully
and follow the instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
global_main.book.book Page 3 Tuesday, March 23, 2021 3:42 PM

4
SAFETY INSTRUCTIONS
• Children should be supervised to ensure that they do not play with
the appliance.
• If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
• Use a new hose or hose-set supplied with the appliance. Reusing old
hoses can cause a water leak and subsequent property damage.
• Ventilation openings must not be obstructed by a carpet.
• This appliance is intended to be used in household applications only.
• The inlet water pressure must be between 50 kPa and 800 kPa.
Maximum Capacity
The maximum capacity in some cycles for dry clothes to be washed is
2.5 kg .
Installation
• Never attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
• This appliance should only be transported by two or more people
holding the appliance securely.
• Do not install the appliance in a damp and dusty place. Do not install
or store the appliance in any outdoor area, or any area that is subject
to weathering conditions such as direct sunlight, wind, rain, or
temperatures below freezing.
• Make sure the power plug is completely pushed into the power
outlet.
• Do not plug the appliance into multiple outlet sockets, power boards,
or an extension power cable.
• Do not modify the power plug provided with the appliance. If it does
not fit the power outlet, have a proper outlet installed by a qualified
electrician.
global_main.book.book Page 4 Tuesday, March 23, 2021 3:42 PM

5
SAFETY INSTRUCTIONS
ENGLISH
• This appliance is equipped with a power cord having an equipment-
earthing / grounding conductor (earthing pin) and a grounding
power plug. The power plug must be plugged into an appropriate
outlet socket that is installed and earthed / grounded in accordance
with all local codes and ordinances.
• Improper connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance is
properly grounded.
• Tighten and secure the drain hose at connecting ends to avoid
separation.
Operation
• The Mini Washer is designed to wash lightly soiled and delicate items,
and then do not wash normally or heavy soiled clothes or other items
such as rugs, mats, shoes, sheets, towels, rugs, jeans, or pet blankets.
• Do not install the Mini Washer on top of another Mini Washer or
Pedestal or elevated surface or stand.
• To avoid breaking the door glass, do not push too hard on the door
when closing.
• Do not open or close the door by foot and step on Mini washer.
• Do not apply any sharp objects to the control panel in order to
operate the appliance.
• Do not attempt to separate any panels or disassemble the appliance.
• Do not repair or replace any part of the appliance. All repairs and
servicing must be performed by qualified service personnel unless
specifically recommended in this Owner's Manual. Use only
authorized factory parts.
• Do not push down the door excessively, when the appliance door is
open.
• Do not put animals, such as pets into the appliance.
• Keep the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
global_main.book.book Page 5 Tuesday, March 23, 2021 3:42 PM

6
SAFETY INSTRUCTIONS
• Do not leave the appliance door open. Children may hang on the door
or crawl inside the appliance, causing damage or injury.
• Do not put in, wash or dry articles that have been cleaned in, washed
in, soaked in, or spotted with combustible or explosive substances
(such as waxes, wax removers, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene, petrol, spot removers, turpentine,
vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can
cause fire or explosion.
• Do not use or store flammable or combustible substances (ether,
benzene, alcohol, chemical, LPG, combustible spray, gasoline,
thinner, petroleum, insecticide, air freshener, cosmetics, etc.) near
the appliance.
• Never reach into the appliance while it is operating. Wait until the
drum has completely stopped.
• Do not touch the door during a high temperature programme.
• In case of a water leak from the appliance or flood, disconnect the
power plug and contact the LG Electronics customer information
centre.
• Turn off water taps to relieve pressure on hoses and valves and to
minimize leakage if a break or rupture should occur. Check the
condition of the fill hoses; they should be replaced after 5 years.
• If there is a gas leakage (isobutane, propane, natural gas, etc.) within
the home, do not touch the appliance or power plug and ventilate the
area immediately.
• If the drain hose or inlet hose is frozen during winter, use it only after
thawing.
• Keep all washing detergents, softener and bleach away from
children.
• Do not touch the power plug or the appliance controls with wet
hands.
• Do not bend the power cable excessively or place a heavy object on it.
• Avoid touching any water that is drained from the appliance during
the wash.
global_main.book.book Page 6 Tuesday, March 23, 2021 3:42 PM

7
SAFETY INSTRUCTIONS
ENGLISH
• Make sure that drainage is working properly. If water is not drained
properly, your floor may get flooded.
• Wipe off dirt or dust on the contacts of the power plug.
Maintenance
• Disconnect the appliance from the power supply before cleaning the
appliance. Setting the controls to the OFF or stand by position does
not disconnect this appliance from the power supply.
• Securely plug the power plug in the outlet socket after completely
removing any moisture and dust.
• Do not spray water inside or outside the appliance to clean it.
• Never unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the outlet
socket.
• Only qualified service personnel from LG Electronics service centre
should disassemble, repair, or modify the appliance. Contact an LG
Electronics customer information centre if you move and install the
appliance in a different location.
Disposal
• Before discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
• Dispose of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause
suffocation.
• Remove the door before disposing of or discarding this appliance to
avoid the danger of children or small animals getting trapped inside.
global_main.book.book Page 7 Tuesday, March 23, 2021 3:42 PM

8
INSTALLATION
INSTALLATION
Parts and Specifications
NOTE
• Appearance and specifications may change without notice to improve the quality of the appliance.
Front View
a Lint Filter
b Drum
c Door Open/Close Button
d Liquid Detergent Dispenser
e Control Panel
f Liquid Softener Dispenser
Rear View
a Main Washer Leg Hole
b Stacking Switch
c Drain Hole
d Water Inlet (Cold Only)
e Power Plug
f Levelling Feet
Specifications
Model FT018TGES
Power Supply 220 - 240 V~, 50 Hz
Dimension (Width X Depth X Height) 635 mm X 755 mm X 365 mm
Product Weight 45 kg
global_main.book.book Page 8 Tuesday, March 23, 2021 3:42 PM

9
INSTALLATION
ENGLISH
Accessories
*1 The included accessories vary depending on the model you purchased.
NOTE
• The images in this manual may be different from the actual components and accessories that are subject
to change by the manufacturer without prior notice for product improvement purposes.
a
Water supply hose(for
cold water)
b
Connecting Supply Hose
and Disassembled
Connector
*1
c
Connecting Supply Hose
with Assembled
Connector
*1
d
Water Drain Hose
e
Water Drain Hose
Connector
f
Band Clamps (3 EA)
g
Cable Ties (2 EA)
h
Back Brackets (2 EA)
i
Machine Screw (13 EA)
j
Short Sheet Metal Screw (5
EA)
k
Long Sheet Metal Screw
(11 EA)
l
Spanner
m
Anti-slip Sheets
n
Detergent Measuring Cup
global_main.book.book Page 9 Tuesday, March 23, 2021 3:42 PM

10
INSTALLATION
Installation Place
Requirements
Installation Location
• This appliance must be installed on firm flooring
to minimize vibration during the spin cycle.
Concrete flooring is best, being far less prone to
vibration during the spin cycle than wooden
floorboards or a carpeted surface.
• If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (850 X 600 mm) covered with
aluminum foil on the side facing the cooker or
stove must be inserted between the two
appliances.
• Ensure that when the appliance is installed, it is
easily accessible for an engineer in the event of a
breakdown.
• When installing the appliance, adjust all four feet
using the transit bolt spanner provided to
ensure the appliance is stable.
Floor Installation
*1 minimum space for installation
To ensure sufficient clearance for water inlet hoses,
drain hose and airflow, allow minimum clearances
of at least 2 cm at the sides and 10 cm behind the
appliance. Be sure to allow for wall, door, or floor
moldings that may increase the required
clearances.
WARNING
• This appliance must only be used for domestic
household purposes and should not be used in
mobile applications.
NOTE
• Never try to level any uneven floor by putting
pieces of wood, cardboard or similar materials
under the appliance.
Ventilation
• Make sure that air circulation around the
appliance should not be impeded by carpets,
rugs, etc.
Ambient Temperature
• Do not install the appliance in rooms where
freezing temperatures may occur. Frozen hoses
may burst under pressure. The reliability of the
electronic control unit may be impaired at
temperatures below freezing point.
• If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
Electrical Connection
• Do not use an extension cord or double adapter.
• Always unplug the appliance and turn off the
water supply after use.
A 140 cm
B 127 cm
C 2 cm
A
B
C
D
EJ
G
H
IFI
D 120 cm
E
130 cm
*1
F 10 cm
G 0.5 cm
H 130 cm
I 5 cm
J 64 cm
global_main.book.book Page 10 Tuesday, March 23, 2021 3:42 PM

11
INSTALLATION
ENGLISH
• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
• The appliance must be positioned so that the
plug is easily accessible.
• Power outlet must be within 1 meter of either
side of the appliance.
WARNING
• Repairs to the appliance must only be carried out
by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or
serious malfunctioning. Contact your local
authorised LG repairer.
• The power plug must be plugged into an
appropriate outlet socket that is installed and
grounded/earthed in accordance with all local
codes and ordinances.
Stacking Mini Washer and
Main Washer
Needed Accessories
a Back Brackets (2EA)
b Machine Screw (13EA)
c Short Sheet Metal Screw (5 EA)
d Long Sheet Metal Screw (11 EA)
NOTE
• Accessories are subject to change by the
manufacturer without prior notice for product
improvement purposes.
Attaching Brackets on Mini
Washer
1 After removing the carton and shipping
material, lift the Mini Washer off the foam
base, and keep 2 brackets on the foam base.
• Make sure the plastic tub support comes off
with the base and is not stuck to the bottom
of the Mini Washer.
2 Remove and save the foam block for future
use.
• If the Mini Washer must be moved in the
future, the foam block will help prevent
damage to the Mini Washer during
transportation.
• To prevent damage, do not remove the foam
block until the Mini Washer is at the final
location.
3 Turn the top cover about 180 degrees, cover
the opening in the top with the top cover and
install 4 short sheet metal screw.
global_main.book.book Page 11 Tuesday, March 23, 2021 3:42 PM

12
INSTALLATION
4 Attach the two back brackets on the rear top of
the Mini Washer by inserting 4 machine screws
in each bracket.
Stacking Main Washer on Mini
Washer
1 Place the Main Washer on top of the Mini
Washer.
• Place the leveling feet of the Main Washer
inside the bracket openings on the Mini
Washer, and align the bracket screw holes.
2 Securely attach the two washer at the corners
using screws.
• First, insert screws on each side. Then insert
screws on the front and back side.
NOTE
• It can be difficult to assemble if it is not
assembled in the proper order, or if the Mini
washer has not been leveled prior to placing the
Main washer on top.
3 Turn the feet of the Main Washer slightly until
they are firmly snug up against the Mini
Washer. Loosen the adjustable feet by turning
them clockwise for a half turn with a spanner.
global_main.book.book Page 12 Tuesday, March 23, 2021 3:42 PM

13
INSTALLATION
ENGLISH
Then tighten the four lock nuts. All lock nuts
must be tightened.
NOTE
• The Mini Washer will not work as a stand-alone
unit.
Connecting the Water
Supply Hose
Needed Accessories
*1 The included accessories vary depending on the
model you purchased.
a Water Supply Hose(for cold water)
b Connecting Supply Hose and Disassembled
Connector
*1
c Connecting Supply Hose with Assembled
Connector
*1
Note for Connection
• Water pressure must be between 50 kPa and
800 kPa (0.5 – 8.0 kgf/cm²). If the water pressure
is more than
800 kPa , a decompression device
should be installed.
• Periodically check the condition of the water
supply hose and replace the water supply hose if
necessary.
NOTE
• If the water pressure is near or over 800 kPa, a
water pressure reduction device should be
installed to both taps.
• Exceeding 65 ℃can damage some clothes.
• Temperatures below 4 ℃can cause hoses to
freeze and burst and unfavourable wash results
due to undissolved detergent.
• Cold inlet Water Temperatures over 25 ℃can
cause damage to clothes such as delicate
Woollens
• Do not overtighten the water supply hose or use
mechanical devices to tighten onto the inlet
valves.
• No further backflow protection is required for
connection to the water inlet.
Checking the Rubber Seal
Two rubber seals a are supplied with the water
supply hose. They are used to prevent water leaks.
Connection to taps is sufficiently tight.
• Do not use mechanical devices such as multi
grips to tighten the water supply hose. Ensure
that the curved end of the water supply hose is
connected to the appliance.
global_main.book.book Page 13 Tuesday, March 23, 2021 3:42 PM

14
INSTALLATION
Connecting the Hose to the
Water Tap
Connecting Screw-Type Hose to Tap with Thread
Screw the supply hose connector onto the water
supply tap. Hand tighten only with the aid of a soft
cloth. Do not overtighten the supply hose with any
mechanical device.
NOTE
• After connecting the water inlet hose to the
water tap, turn on the water tap to flush out
foreign substances (dirt, sand, sawdust, and etc.)
in the water lines. Let the water drain into a
bucket, and check the water temperature.
Connecting the Cold Supply
Hoses to Both Washing
Machines
1 Open the accessory package for the Mini
Washer installation accesories.
2 Connect the water supply hose of Mini Washer
to the COLD water supply hose connector.
3 Connect one end of the cold water supply hose
connector
a to the cold water supply hose of
the Main Washer first.
4 Connect the additionally provided water supply
hose of Main Washer to the cold water supply
hose connector and cold water tap.
NOTE
• Make sure the water supply hose is not kinked or
pinched.
Installing the Drain Hose
Needed Accessories
a Water Drain Hose
b Water Drain Hose Connector
c Band Clamps (3 EA)
global_main.book.book Page 14 Tuesday, March 23, 2021 3:42 PM

15
INSTALLATION
ENGLISH
Connecting the Drain Hose to
the Mini Washer
The drain hose should not be placed higher than
100 cm above the floor. Water in the appliance may
not drain or may drain slowly.
1 Insert the band clamp onto the drain hose
elbow. Pliers may be required to open the
clamp so it can be fitted to the rubber end of
the hose.
2 With the hose leading up from the elbow,
firmly insert the elbow onto the drain outlet on
the back of Mini Washer.
3 Adjust the band clamp with pliers to keep the
hose securely in place and prevent leaking.
Connecting the Drain
Connector
1 Insert the included band clamps on to the ends
of the two drain hoses.
2 Connect the drain hose of Main Washer and
Mini Washer to the drain connector.
3 Connect the drain hose to the drain spigot on
the laundry sink or bench top fitting.
CAUTION
• Adjust the band clamps to prevent the hoses
from coming loose or leaking. Failure to do so
could result in flooding. Use of the drain
connector helps avoid siphoning, odors, or
improper draining.
• Make sure the drain hoses are not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
• Depending on the installation environment, you
may have to purchase a separate drain hose
connector. The connector supplied will suit a
standard laundry tub side drain hole.
Levelling the Appliance
Checking the Level
When pushing down the edges of the top plate
diagonally, the appliance should not move up and
down at all (check both directions).
• If the appliance rocks when pushing the top
plate of the appliance diagonally, adjust the feet
again.
• Check whether the appliance is perfectly level
after installation.
NOTE
• Timber or suspended type flooring may
contribute to excessive vibration and unbalance.
Reinforcement or bracing of the timber floor
may need to be considered to stop or reduce
excessive noise and vibration.
Adjusting and Levelling the
Feet
When installing the appliance, the appliance
should be aligned and perfectly level. If the
appliance is not aligned and level properly, the
global_main.book.book Page 15 Tuesday, March 23, 2021 3:42 PM

16
INSTALLATION
appliance may be damaged or may not operate
properly.
1 Turn the levelling feet as required if the floor is
uneven.
• Do not insert pieces of wood etc. under the
feet.
• Make sure that all four feet are stable and
resting on the floor.
NOTE
• Do not install the washing machine on a plinth,
stand or elevated surface unless it is
manufactured by LG Electronics for use with this
model.
2 Check if the appliance is perfectly level using a
spirit level
a .
3 Secure the levelling feet with the lock nuts b
by turning anti-clockwise against the bottom of
the appliance.
4 Check if all lock nuts at the bottom of the
appliance are secured properly.
WARNING
• After stacking the Main Washer on to the Mini
Washer, use the leveling feet on Mini Washer to
level both. Main Washer´s leveling feet should be
already be firmly snug against the Mini Washer
and the locknuts turned counter-clockwise to
secure them.
NOTE
• Proper placement and levelling of the appliance
will ensure long, regular, and reliable operation.
• The appliance must be 100% horizontal and
stand firmly in position on a hard flat floor.
• It must not ‘Seesaw’ across corners under the
load.
• Do not let the feet of the appliance get wet.
Failure to do so may cause vibration or noise.
Using Anti-Slip Sheets
This feature may vary depending on the model
purchased.
If you install the appliance on a slippery surface, it
may move because of excessive vibration.
Incorrect levelling may cause malfunction through
noise and vibration. If this occurs, install the anti-
slip sheets under the levelling feet and adjust the
level.
1 Clean the floor to attach the anti-slip sheets.
global_main.book.book Page 16 Tuesday, March 23, 2021 3:42 PM

17
INSTALLATION
ENGLISH
• Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2 Adjust the level after placing the appliance in
the installation area.
3 Place the adhesive side a of the anti-slip
sheets on the floor.
• The most effective way is to install the anti-
slip sheets under the front feet. If it is
difficult to place the sheets under the front
feet of the appliance, attach them under the
rear feet.
4 Put the appliance on the anti-slip sheets.
• Do not attach the adhesive side
a of anti-
slip sheets to the feet of the appliance.
NOTE
• Additional anti-slip sheets are available at LG
Electronics service centre.
global_main.book.book Page 17 Tuesday, March 23, 2021 3:42 PM

18
OPERATION
OPERATION
Operation Overview
Using the Appliance
1 Sort clothes and load items.
• Sort clothes by fabric type, soil level, colour
and load size as needed. Open the door and
load items into the appliance.
2 Add cleaning products or detergent and
softener.
• Add the proper amount of detergent with
the detergent measuring cup to the washing
drum evenly.
3 Closing the door and drawer.
4 Turn on the appliance.
• Press the
Power button to turn on the
appliance.
5 Choose the desired cycle.
• Press the cycle button repeatedly until the
desired cycle is selected.
6 Begin cycle.
• Press the
Start/Pause button to begin the
cycle. The appliance will agitate briefly
without water to measure the weight of the
load. If the
Start/Pause button is not
pressed within a certain time, the appliance
will shut off and all settings will be lost.
7 End of cycle.
• When the cycle is finished, a melody will
sound. Immediately remove your clothing
from the appliance to reduce wrinkling.
Check around the door seal when removing
the load for small items that may be caught
in the seal.
• After washing is complete, wipe off the
washing machine door, gasket and inside
the washing drum with a soft dry towel for
clean washing.
Preparing the Wash Load
Sorting the Clothes
• For best washing results, sort your clothes
according to the care label stating fabric type
and washing temperature.
• Soil level (Heavy, Normal, Light): Separate
clothes according to soil level. Wash lightly soiled
items to the Mini Washer, and then wash heavily
or normally soiled items to LG Main Washer.
• Colour (White, Lights, Darks): Wash dark or dyed
clothes separately from whites or light colours.
Mixing dyed clothes with light clothes can result
in dye transfer or discolouration of lighter
clothes.
• Lint (Lint producers, Collectors): Wash separately
lint producing fabrics from lint collecting fabrics.
Lint producers can result in pilling and linting on
the lint collectors.
Checking the Clothes Care Label
The symbols tell you about the fabric content of
your garment and how it should be washed.
Symbols on the Care Labels
Symbol Wash / Fabric type
• Normal Wash
• Cotton, Mixed Fabrics
• Easy Care
• Synthetic, Mixed Fabrics
• Special Delicate Wash
• Delicates
• Hand Wash Only
• Wool, Silk
global_main.book.book Page 18 Tuesday, March 23, 2021 3:42 PM

19
OPERATION
ENGLISH
NOTE
• The dashes under the symbol give you
information about the type of fabric and the
maximum allowance of mechanical stress.
Checking the Clothes before
Loading
• Combine large and small items in a load. Load
large items first.
• Large items should not be more than half of the
total wash load. Do not wash single items. This
may cause an unbalanced load. Add one or two
similar items.
• Check all pockets to make sure that they are
empty. Items such as nails, hair clips, matches,
pens, coins and keys can damage both your
appliance and clothes.
• Wash delicates (stockings, underwired bras) in a
wash net.
• Close zippers, hooks and strings to make sure
that these items do not snag on other clothes.
• Pre-treat dirt and stains by brushing a small
amount of detergent dissolved water onto stains
to help lift dirt.
Closing the Door and Drawer
1 Gently push down on the Mini Washer’s Lid
until it clicks.
2 Push the drawer until it has completely closed.
CAUTION
• Do not let your hands get stuck between the
door and the washing machine, as this can cause
injury.
• Forcing the drawer or the Lid to open can cause
parts to be damaged and safety problems.
• Closing the drawer before having closed the Lid
completely may scratch the Lid glass.
• Ensure the drawer is pulled out completely to
prevent the Lid from contacting the front of the
Main Washer.
NOTE
• The Lid lock may fail if there is too much clothes
in the mini washer or if the Lid is not completely
closed.
•
H lights up when the programme starts and the
door is locked. To open the drawer, press the
Start/Pause button to stop the washer.
• If
dE1 , dEz or dO appears on the display, close the
drawer and the Lid completely. After doing so,
press the
Start/Pause button again.
• If the drawer cannot be opened completely, pull
the drawer forward with a little force using both
hands.
• If power failure occurs during product
operation, the door cannot be opened. Restore
the power again or contact the LG service centre.
• The Lid may not open due to high ambient
temperatures, if this occurs after a wash and
there are no error codes on the display, select
the
Rinse+Spin programme or wait until
temperatures drop so that the Lid can be
released.
Adding Detergents and
Softeners
Detergent Dosage
• Detergent should be used according to the
instruction of the detergent manufacturer and
selected according to type, colour, soiling of the
• Do not wash
Symbol Wash / Fabric type
global_main.book.book Page 19 Tuesday, March 23, 2021 3:42 PM

20
OPERATION
fabric and the washing temperature. Use only
detergents that are suitable for Drum (front
load) type washers.
• If too many suds occur, reduce the detergent
amount.
• If too much detergent is used, too many suds
can occur and this will result in poor washing
results or cause heavy load to the motor.
• If you wish to use liquid detergent, follow the
guidelines provided by the detergent
manufacturer.
• Detergent usage may need to be adjusted for
water temperature, water hardness, size and soil
level of the load. For best results, avoid
overdosing the detergent. Failing to do so will
cause oversudsing.
• Refer to the label of the clothes, before adding
the detergent and choosing the water
temperature.
• Use only suitable detergents for the respective
type of clothing:
- Liquid detergent is often designed for special
applications, e.g. for coloured fabric, wool,
delicate or dark clothes.
- Powdered detergent is suitable for all types of
fabric.
- For better washing results of white and pale
garments, use powdered detergent with
bleach.
- Detergent is flushed from the dispenser at the
beginning of the wash cycle.
NOTE
• Do not let the detergent harden. Doing so may
lead to blockages, poor rinse performance or
odour.
Adding Detergent and Softener
Using the Dispenser
1 Slide open the drawer.
2 Add the detergent and softener into the
appropriate compartments.
a Liquid detergent compartment
b Liquid fabric softener compartment
NOTE
• Pour detergent and fabric softer to the
maximum fill line. Pouring excessive them over
the maximum fill line can cause it to dispense too
early, which may stain the clothes.
3 Gently slide the drawer closed before starting
the washing programme.
Using the Detergent Measuring Cup
1 Slide open the drawer, open the door.
2 Measure the detergent with the detergent
measuring cup and pour it into the drum.
• Use the provided detergent measuring cup
to add only one cup of detergent.
3 Close the door, slide the drawer closed before
starting the washing programme.
NOTE
• Less detergent is required for lightly soiled
items. Please use appropriate amount of
detergent in the Mini Washer. If you use too
much detergent, excessive bubbles will remain
after rinsing.
global_main.book.book Page 20 Tuesday, March 23, 2021 3:42 PM