LG WM3250HRA User manual

Life's Good
OWNER'S MANUAL
WASHING MACHINE
Please read this owner's manual thoroughly before operating and keep it handy for
reference at all times.
WM3250H_A
PiNo,:MFL67683475
vet,082613.01 www, lg.com

2 TABLE OF CONTENTS
TABLE OF CONTENTS
3
4
5
6
7
PRODUCT FEATURES
IMPORTANT SAFETY INSTRUCTIONS
BASIC SAFETY PRECAUTIONS
GROUNDING INSTRUCTIONS
SAFETY INSTRUCTIONS FOR INSTALLATION
SAFETY INSTRUCTIONS FOR USE, CARE,
CLEANING, AND DISPOSAL
8 INTRODUCING YOUR WASHING MACHINE
8 Parts and Accessories
9 Control Panel Features
11 INSTALLATION INSTRUCTIONS
11 Preview Installation Order
12 Checking and Choosing the Proper Location
13 Unpacking and Removing Shipping Bolts
!4 Connecting the Water Lines
15 Connecting the Drain Line
16 Leveling the Washing Machine
17 Plugging in the Power Cord and Grounding
17 'Test Run
!8
18 Sorting Wash Loads
18 - Precautions for fabric care before wash cycle
!9 oFabric care tabels
!9 - Sorting laundry
20 Using detergent!fabric softener
20 - Recommended detergent
20 Loading the dispenser
24 - Quick wash Speed VVash
25 Cycle Modifier buflons
25 Setting options before cycle
25 - Setting the water temperature, Wash Temp
25 - Setting spin speed, Spin Speed
25 - Setting soil level of Eaundryi Soil Level
26 - Prewashing, Pre-Wash
26 - Rinse, drain and spin only, Rinse + Spin
26 - Adding an extra rinse cycle, Extra Rinse
26 Adding extra water to the wash and rinse cycles,
Wafer Plus
26 o Preselling the start time, Delay Wash
26 Efficiency cleaning, Steam
27 _ Saving energy, ColdWash TM
27 _-Turning on/off melody and button tones, Signal
On/Off
27 Setting options during cycle
27 - Button lock feature, Child Lock
28
28 Care
28 _ Care after wash
28 _ Care in cold climates
29 Cleaning
29 - Cleaning the drum, Tub Clean
30 _ Cleaning the detergent dispenser drawer
31 o Cleaning the water inlet filters
32 - Cleaning the drain, pump filter
33 - Cleaning the door seal
34 TROUBLESHOOTING
34 Checking error messages
35 Before calling for service
USING YOUR WASHING MACHINE
22
23 Cycle guide
24 Main cycle
24 _ Reduce laundry allergen, Allergiene _M
24 Reduce bacteria on laundry, Sanitary
24 _ Blankets or bulky items, Bulky/Large
24 _ Normal items, Co#on/Normal
24 - Wrinkle free items, Perm. Press
24 _ Sheer items, Deliea_es
24 - Items labeled wool or hand-washable, Hand VVash/
Wool @
36
37 USING SMART DIAGNOSIS TM
38

PRODUCT FEATURES 3
PRODUCT FEATURES
The inverter direct drive motor, which is directly attached to the drum, is capable of producing multiple distinct different motions
for optimal washing performance with very little noise and vibration_ The motor assembly also contains fewer moving parts,
thus resulting in fewer repairs
Should you experience any technical difficulty with your washing machine, it has the capability of transmitting data by phone to
the Customer Information Center, The calt center agent records the data transmitted from your machine and uses it to analyze
the issue, providing a fast and effective diagnosis (Refer to page 37)_
ReguJar cleaning of the tub on a monthly basis using Tub Clean can help keep the tub clean and fresh_
Safely and conveniently secure the door slightly aiar with the magnetic door plunger This wilt promote air circulation and allow
the interior of the machine to dry', To use this feature, after the load has been removed, do not ciose the door completely.
When the magnetic door pJunger comes into contact with the metal washer cabinet, it will secure the door slightly open
allowing the interior of the washer to dry,
The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and allow easier access for
large items.
Use this option to disable the controls during a wash cycle This option can prevent children from changing cycles or operating
the machine It can also be used to disable controls for cleaning purposes.
The four..,compartment dispenser drawer makes it easy to separate the pre_wash detergent, the main laundry detergent, liquid
Meach, and fabric softener into different compartments.
During LG's unique high-efficiency Steam cycle, the hot steam gently removes tough stains.

4 IMPOR:ANT SAFETY _NSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, injury to persons, or death.
Your safety and the safeW of others are very important. '
We have provided many important safety messages in this manual and on your appliance. A_ways read and obey all safety
messages
This is the safety alert symbol
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages wil_ follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.
These words mean:
A DANGER
You wiii be killed or seriousiy injured if 'you don't immediately foliow instructions.
A WA RNING
You can be killed or seriously iniured if you don't follow instructions.
A CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
AIt safety messages wil_ tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
SAF EF_" PRECAUTIONS
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the
following :
•Use this appliance only for its intended purpose as described
in this owner's manual
• Before use, the washer must be proporly installed as
described in this manual.
• Do not wash a_cles that have been previously cleaned in,
washed in, soaked in, or spotted with gasoline, dr,/cleaning
solvents, or other flammable or explosive substances, as
they give off vapors that could ignite or explode
• Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water,
These substances give off vapors that could ignite or
• Under certain conditions, hydrogen gas may be produced in a
hot water system that has not been used for 2 weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the washer, turn on all hot water faucets and let the water
flow from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable, do not
smoke or use an open flame during this time.
• Do not allow children to play on or in the washer. Close
supervision of children is neces_r_ when the "washer is
used near children.
, Before the washer is removed from service or discarded,
remove the lid to prevent children from climbing inside.
• Do not instil or store the washer where it will be exposed
to the "weather or freezing temperatures.
Do not _mpor with controls.
•Keep the area underneath and around your appliances free of
combustiMe materials (lint paper, rags, etc.), gasoline,
chemicals and other flammable vapors and liquids
•Do not repair or replace any part of the washer or attempt
any servicing other than as described in this manual. We
strongly recommend that any service be performed by a
qualified technician,
• See Ins_llation in_ructions for grounding requirements.
• ALWAYS follow the fabric care instru_ions supplied by the
garment manufacturer.
• Do not place items exposed to c-9ol_Jngoil in "four washer,
Stems contaminated with cooking oils may contribute to a
chemicai reaction that could cause a load to catch fire,
• Use fabric softeners or products to eliminate static only as
recommended by the manufacturer.
° This washer is not designed for maritime use or for mobile
installations such as in RVs, aircraft, etc.
• Turn off the water faucets and unplug the washer if the
machine is to be left for an e_ended period of time, such as
during vacations.
° Packaging materiai can be dangerous for chiMren. There is a
risk of suffocatio!! Keep all _kaging from children.
° Always check the inside of the washer for foreign objects
before loading laundry. Keep the lid dosed when not in use.
° Do not reach into the appliance if the tub or agitator is
moving.
• WARNING : This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.

IMPORTANT SAFETY INSTRUC]"iONS 5
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, injury to persons, or death.
GROUND!N
This appliance must be grounded In the event of malfunction or breakdown, grounding will reduce the risk of e_ectric shock by
providing a path of least resistance for e_ectric current. This appliance is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances,
WARNING
Improper connection of the equipmentogrounding conductor can result in risk of electric shock. Check with a qualified electrician
or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the
appliance, if it does not fit the outlet, have a proper outlet installed by a qualified electrician, Failure to follow these warnings can,
cause serious injury, fire, electric shock, or death

6 IMPORTANT SAFETY _NSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
For your safety the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, iniury to persons, or death
SAFETY INSTRU FOR INSTALLATION
To reduce the risk of fire, electric shock, or injury to persons when
following :
•Refer to INSTALLATION INSTRUCTIONS for detailed
grounding procedures, installation instructions are packed
with the washer for instalier's reference Lfthe washer is
moved to a new location, have it checked and reinstalled by
a qualified service technician. Failure to follow this warning
can cause serious iniury, fire, electric shock, or death
•Do not, under any circumstances, cut or remove the third
(ground) prong from the power cord. Failure to follow this
warning can cause serious injury, fire, electric shock, or
death,
•For personal safety, this appliance must be properly
grounded. Failure to follow this warning can cause serious
injury, fire, electric shock, or death,
•The power cord of this appliance is equipped with a _rong
(grounding) plug which mates _th a standard 3_prong
(grounding) vail outlet to minimize the possibility of e_ectdc
shock from this appliance
• This washer must _ plugged into a 120 VAC, 60 Hz
grounded outlet. Failure to follow this warning can cause
serious iniury, fire, electric shock, or death
•Have the "vail outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Failure to follow this warning can cause serious iniury, fire,
electric shock, or death.
° W_ere a standard 2-prong wall outlet is encountered, it is
your personal responsibility and obligation to have it
replaced with a properly grounded _rong v,_ll outlet,
Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
° Do not install on carpet, Install washer on asolid floor.
Failure to follow this warning can cause serious leak damage,
• Do not remove ground prong. Do not use an a_pter or
extension cord, Plug into agrounded _rong outlet. Failure
to follow these warnings can cause serious injury, fire,
electric shock, or death.
using this appliance, follow basic precautions, including the
•The washer should always be plugged into its own individual
electrical outlet which has a .voltage rating _at matches the
rating plate. This provides the best performance and also
prevents overloading house wiring circuits which could cause
a fire hazard from overheated wires
•Never unplug "four washer by pulling on the power cord.
Always grip plug firmly and pull straight out from the outlet
Failure to follow this warning can cause serious injurv, fire,
electric shock, or death,
-Repeir or immediately replace all power cords that have
become frayed or other'wise damaged, Do r_ot use acord
that sho'_,_ cracks or abrasion damage along its length or at
either end. Failure to foliow this warning can cause serious
injury, fire, electric shock, or death,
•When installing or moving the washer, be careful not to
pinch, crush, or damage the power cord. Failure to fotiow
this warning can cause serious injury, fire, electric shock, or
death
•The washer must be installed and electrically grounded by a
qualified service person in accordance with local codes to
prevent shock hazard and assure stability during operation,
° The washer is heavy, Two or more people may be needed
to install and move the appliance. Failure to do so can result
in back or other injury
• Store and install the washer Were it will not be exposed to
temperatures belcvw freezing or exposed to outdoor
weather conditions. Failure to follow this warning can cause
serious leak damage,
• To reduce the risk of electric shock, _ not install the
,washer in humid spaces. Failure to follow this warning can
cause serious iniury, fire, electric shock, or death,
• To redu_ the risk dinjury to persons, adhere to all
indu_ry recommended safety procedures including the use
of long sleeved gloves and safety glasses. Failure to follow
all of the safety warnings in this manual could result in
property damage, injury to persons or death,

!MPORTANT SAFETY !NSTRUC]"iONS 7
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, 'the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent p_operty damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE_,CARE. CLEANING_, AND DISPOSAL
AWARNING
]o reduce the risk of fire, electric shock, or iniury to persons when using this appiiance, foilow basic precautions, including the
following :
•Unplug the washer before cleaning to avoid the risk of
electric shock
• Never use harsh chemicals, abrasive cleaners, or solvents
to clean the washer. They will damage the finish.
• Do not put oily or gr_sy rags or clothing on top of the
washer. These substances give off vapors that could ignite
the materials,
° Do not wash items that are soiled with vegetable or cooking
oi!. These items may contain some oil after laundering. Due
to the remaining oil, the fabric may smoke or catch fire by
itself
•Disconnect this a_iiance from the power supply before
attempting any user maintenance. Turning the controls to
the OFF position does not disconnect this appliance from the
power supply. Faiiure to follow this warning can cause
serious injury, fire, electric shock, or death.
° Do not combine laundry products for use in one load unless
specified on the label.
• Do not mix chlorine bleach with ammonia or acids such as
vinegar. Follow pac_ge directions Sen using laundry
products, Incorrect usage can produce poisonous gas,
resulting in serious injury or death.
° Do not reach into the washer while parts are moving.
Before loading, unloading, or adding items, press the
SE button and allow the drum to coast to a
complete stop before reaching inside. Failure to follow this
warning can cause serious injury, fire, electric shock, or
death.
• Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is
used near children. _ children grow, teach them the
proper, safe use of all appliances. Failure to comply with
these warnings could result in serious iniury to persons or
death_
•Destroy the carton, plastic beg, and other packing materials
after the washer is un_cked. Children might use them for
play. Cartons covered with rugs, bedspreads, or plastic
sheets can become airtight chambers. Faiture to comply
with these warnings could result in serious iniury to persons
or death
° Keep laund_ products out of children's r_ch. To prevent
injury to persons, observe all 'warnings on product labels.
Failure to comply with these warnings could result in serious
injury to persons or death..
° Before your ,washer is removed from service or discarded,
remove the door to the washing compartment to avoid the
danger of children or small animals getting trapped inside
before your washer is removed from sap€ice or discarded.
Failure to do so can result in serious iniury to persons or
death.
° Make sure the dispenser drawer is closed at all times Sen
not being filled with laundry products. Failure to keep the
drawer closed can result in personal injury or flooding.
SAVE THESE iNS UCTIONS

8 INTRODUCING YOUR WASHING MACH!NE
INTRODUCING YOUR WASHING MACHINE
Parts and Accessories
Deterc
dispenser
drawer
[See page 20)
_anel
(See page 9)
Water inlets
Magnetic door
plunger
(See page 3)--
pump filter cover
pump fi|ter
Drain hose
)oor
seal
tub
Leveling
feet
Sh_ boIts --,Power cord
--Drain hose
INCLUDEDAccessories
Hot/cod water hoses Non-,skid pads Caps for cover ng
shipping bolt hoies
Wrench Tie strap EIbow bracket
(forsecuringdran hose
fOPTIONAL Accessories
Pedestal Stacking kit
14'Pe_stal _1_ S_ckingKJt Color
WDP4C CSTKS Chardonnay
WDP4R Wld ChefwRed RSTK1 Wild Cherw Red
WDP4S Titanium SSTK1 Titanium
WDP4V GraphiteSteet GSTK1 PeadGray
WDP4W White WSTK1 White
WDP4N Midnight Blue NSTKI Midnight BIue

iNTRODUC!NG YOUR WASHING MACHINE 9
Control Panel Features
Cycle selector Operation Display
STF_MCYCLE
_lky/Large Perm.Pre_s
Sanitary -- Dellcates
HandWash/Wool
TubClean Speed Wash
Power Sta_i Water Spin Soil
Button Pause Temperature Speed Level
Button Selection Selection Seiection
Button Buffon Button
•Turns the washing mach ne on and off
•(During the wash cycle) stops operat on, and eaneets the sett ngs.
• AIlergiene TM
For cotton, underwear (see page 24)
• _nitar¢
- For underwear, diaper etc. (see page 24)
" Bulky/Large
- For blankets or _argebulk,i items (see page 241
• Cotton/_ormal
- For general laundr% such as cetton T_shrts or towels (see page 24)
• Perm. Press
For wrinMe4ree fabr cs (see page 24}
• Delicates
- Fo_sheer and delicate fabrics (see page 24)
,, Hand WashJWcel
- For woo or hand-wash fabrics (see page 24)
• Speed Wash
- For small quantities of ightty soled items (see page 24}
• Tub Clean
-(Press and hodl For cleaning the wash tub (see page 291
Starts or pauses the washing machine cycle,
,._if you do not press the ._!_but£on within 4 minutes of seiecting a cycle, the washing machine wiil
turn off automatically,
', (Press repeatedly) Selects the water temperature for the wash cycle (see page 25).
- Select water temperature from five sett ngs
.(Press repeatedly) Selects the spin speed n the desired level (see page 25}.
Selects spin speed from five sett ngs.
- (Press repeatediy) Selects a wash cycle by soil leve {see page 25}.
Selects sol tevel from five settings.

10 INTRODUCINGYOURWASHINGMACHINE
Opera.tien(contir_ued}
--- _--'o-- Buttono-- '_ Descript_-
• (Press before wash cyce) For pre-washing heavly soiled taundry (see page, 26}
•(Press and hold during wash cycle To lock/unlock the buttons (see page. 27).
• Rinse+ Spin
For itemsthat onlyrequire rinsingand spinning (seepage 26)
• (Press before wash cyctei To add an extra rinse cycte to the selected cycle (see page, 26)
. (Press before wash cycie) To add water during wash and rinse cycle (see page. 261
• (Press and hotd) To turn on/off melody and button tones (see page 27t
•To set a deiayed sta_ time for the cyce (see page_ 26).
•Use this option for heavily soiled loads that need improved stain treatment (see page 26)_
• Use this opton to reduce your energy consumption (see page, 27)
Load size sensing indicator
(See page. 27) indic
Proc_ng
LOAD LO## WASH RINSE SPiN
Sl_ SENSING
Cycle Delay
process wash
indicator
Door lock
afor
EST,_me l_maini_
[
Estimated time remaining/
error message display
indicafor (See page 34)
• At the beginning of the cycle the washer tumbles the toad and detects the weght of the clothes_
uo_ The display wil! indicate the approximate load sze n the LOAD SIZE d splay. This allows you to
adjust the amount of detergent and other add tires for best results and improved efficiency_
_G WASH RINSE SPIN
• This port on of the display shows whch stage of the wash cycle is currently underway (LOAD
SENSING, WASH, RINSE or SPIN)_
•Indicates that the door is !ocked The washer doer wiU tock whiIe the washer is operat ng, The door
can be un ocked by pressing the START/PAUSE button to stop the washer.
• This indicator shows that the washer has been set for Deiay Wash, The washer wll start
automat caUy after the set dela_ time has passed.
• When the START/PAUSE button s pressed, the washer automaticaily detects the wash load (weight}
and optimizes the washing time, based on the selected cycle and options The display will then
ind cate the estimated time rema ning for the selected wash cycle

INSTAL, LA'T'ION INSTRUCTiONS 11
INSTRUCTIONS
Preview installation Order
¢
illS/¸¸_......
:Iti
Checking and choosing the
proper Iocafion Unpacking and removing shipping bolts Connecting the water line
Connecting the drain line Leveling the washing
machine Plugging in the power cord
and grounding
_ii__ i _!iiiiiiii
Test run
WAR NIN G
• Washer is heavy! Two or more people are r_uired when moving and unpacking the washer. Faiiure to follow this warning
can result in back or other iniury.
• Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outd_r weather
conditions. Failure to follow this warning can cause serious injury, fire, eiectdc shock, or death.
• Properh/ground ,washer to conform with all governing codes and ordinances, Faiiure to follow this warning can cause
serious injury, fire, e_ectric shock, or death.
• To reduce the risk of electric shook, do not install the ,washer in humid spaces. Failure to follow this warning can cause
serious injury, fire, electdc shock, or death.
• The base opening must not be obstructed by carpeting when the washer is instafled on a carpeted floor.
• Do not remove ground prong, Do not use an a_pter or extension cord, Plug into a grounded _rong outlet, Failure to
follow this warning can cause serious injury, fire, electric shock or death.

12 INSTALLATION _NSTRUCTIONS
Checking and Choosing the Proper
Instaff the washing machine on a solid floor that is strong and
rigid enough to support the weight of the washing machine,
even when fully loaded, without flexing or bouncing, if the
floor has too much flex, you may need to reinforce it to make
it more rigid. If the floor is not solid, it may cause severe
vibration and noise.
1 Clean the floor before installation.
Make sure to select solid and smooth ground.
2 Two or more people are needed for moving and
unpacking the washing machine.
3 Allow for sufficient space between the walls and the
washing machine for insta_lation,.
You must allow sufficient space for water lines, the drain
line, and airflow.
NOTE '1
Be sure to allow for wall, door, or floor moldings that
may increase the required clearances.
(57 c_m)
4 _
(10cm)(2"5c 1__.___ 27" ---_,_..-1"
68,6 cm (2.5 cm)
51;"
(129.5 cm) _'';
NOTE
,The floor must be strong and rigid enough to support
the weight of the washer, when fully loaded, without
flexing or bouncing, if your floor has too much flex,
you may need to reinforce it to make it more rigid.
A floor that is adequate for a top=loading washer may
not be rigid enough for a front loading washer, due to
the difference in the spin speed and direction. If the
floor is not solid, your washer may vibrate and you may
hear and feel the vibration throughout "four house.
- Before installing the washer, make sure the floor is
clean dry and free of dust, dirt, water and oils so the
washer feet can not slide easily Leveling feet that can
move or slide on the floor can contribute to excess
vibration and noise due to poor contact with the floor.
• If a drip pan must be used, take extra care to follow the
instructions provided with the drip pan and make sure
the leveling feet are adjusted for firm and even contact
with the pan. Use of drip pans and failure to properly
level the machine may result in increased vibration and
noise during operation.
i i ii¸ '_ i
i _iil i
i ii_ iil i
i _! il i i_ ,i
(10cm) (

_NSTAL, L_TION _NSTRUC]"iONS 13
Unpacking and Removing Shipping Bolts 1
When removing the washer from the carton base, be sure to
remove the foam drum support in the middle of the carton
base
If you must _aythe washer down to remove the base
packaging materials, always _ayit carefully on its side
Do not lay the washer on its front or back.
Remove the bottom two shipping boits with the wrench
(inciuded). Fuii7 loosen aHfour shipping bolts by turning
them counterclockwise and then pull them out
Shipping
boll
Foam Tub Carton Base
Support
2Locate the four hole caps included in the accessor7 pack
and install them in the shipping bolt ho_es.
Cap 'x. !
NOTE .....................................................................................................................................
• Save the bolt assemblies for future use_ To prevent
damage to internal components, Do not transport the
washer without reinstalling the shipping bolts.
• Failure to remove shipping bolts and retainers may
cause severe vibration and noise, which can tead to
permanent damage to the washer. The cord is secured
to the back of the washer with a shipping bolt to heip

14 INSTALLATION _NSTRUCTIONS
Connecting the Water Lines
Check the rubber seals on both sides of the hose
--insert a rubber seal into the threaded fittings on each
hose to prevent ieaking,
Rubber seal
4Connect the hoses to the water iniets tightly by hand and
then tighten another 2/:3 turn with pliers_
Connect the blue hose to the cold water inWetand the
red hose to the hot water inlet.
water
inlet
inlet
2
3
hose
(% faucet}
'€,/ate r hose
(To water inlet on the
washing machine)
Connect the water supply hoses to the HOT and COLD
water faucets tightly by hand and then tighten another
2/3 turn with pliers,
oConnect the blue hose to a cold water faucet and the
red hose to a hot water faucet,
After connecting inlet hose to water faucets, turn on the
water faucets to flush out foreign substances (dirt, sand
or sawdust} in the water lines. Let water drain into a
bucket, and check the water temperature
5 Check for leaks by turning on the faucets,
-tf water {eaks, check steps t to 4 again,
NOTE .............................................................................................................................................................................................................................................................................................................................
*Foryoursafety,and forextended productiifeuse
onlyauthorizedcomponents The manufacturerisnot
responsibleforproductmaifunctionoraccidentscaused
by theuse ofseparatelypurchased unauthorizedparts_
, Use new hoses when you instalithe washing machine
Do notreuseoldhose& Use onlythe inlethoses
providedwiththewasher LG does notrecommend the
use ofaftermarkethoses
, Pedodicaiiy check the hoses for cracks, leaks and wear,
and replace the hoses every 5 years.
° Do not stretch the water hoses intentionally, and make
sure that they are not crushed by other objects.
, Watei supply pressure must be between 14,5 PSi and
116 PS_(!00-_800 kPa), if the water supply pressure is
more than 116 PS!, a pressure reducing valve must be
installed.
° To provide optimum washing performance the hot
water temperature should be set at 120-135°F (48-67°C)
and the cold at 60°F (15°C),
. J

INSTAI,oLAT'_O N _NSTRUCTiONS 15
Connecting the Drain Line
Secure the drain hose in place to prevent moving and leaking
NOTE ........................................................................................................................
* The drain hose should be propedy secured, Failure to
properly secure the drain hose can result in flooding
and maffunction_
. Totai height of the hose end should not exceed
96 inches (2:44,8:cm) from the bottom of the washer.
* The drain must be instaJied in accordance with an,/
applicabie gocalcodes and regulations,
° Make sure that the water lines are not stretched,
pfnched, crushed, or kinked
Ctip the end of the hose into the elbow bracket.
Connect the elbow bracket within 4 inches ('10 cm) of
the end of the drain hose, If the drain hose is extended
more than 4 inches (10 cm) beyond the end of the
e_bow bracket, mold, or microorganisms could spread to
the inside of the washer
i No more than
4 inches (10 cm)
Ibow bracket
Cfip the end of the hose into the elbow bracket.
Connect the elbow bracket within 4 inches (10 cm) of
the end of the drain hose If the drain hose is extended
more than 4 inches (10 cm) beyond the end of the
elbow bracket, mold or microorganisms could spread to
the inside of the washer.
No more than
4 inches (10 cm)
Elbow bracket
2Hang the end of the drain hose over the side of the
laundry tub.
Drain Hose
Bracket
3 Use a tie strap to secure the drain hose in place.
2Insert the end of the drain hose into the standpipe_
Drain Hose
3 Use a tie strap to secure the drain hose in piace,

16 INSTALLATION _NSTRUCTIONS
Leveling the Washing Machine
The washer tub of your new washing machine spins at very
high speeds To minimize vibration, noise, and unwanted
movement, the floor must be perfectly _eveland solid.
Check that the washing machine is level,
Ensure it is level by rocking the top edges of the
washing machine or placing a level on the washing
machine. The slope beneath the washing machine must
not exceed !°, and all four leveling feet must rest firmly
on the floor. Level
4Check again to make sure the machine is level
oPush or rock the top edges of the washing machine
gently to make sure that the washing machine does not
rock.
- If the washing machine rocks, repeat steps 1 to 3.
,-A WARNING
• Using the washing machine without leveling, it may
result in malfunction caused by the production of
excess vibration and noise.
• If you are installing the washing machine on the
optional pedestal, you must adjust the leveling feet
on the pedestal to level the washing machine. The
washing machine's leve_ing feet should be minimized
and the Iocknuts turned countercbckwise to secure
them.
• Use the leveling feet only when you level the washing
machine. If you raise the leveling feet unnecessarily, it
may cause abnormal vibration of the washing machine..
\
2 Turn the lower leveling feet clockwise to level the
3
- Turning the iower ieveling feet clockwise raises the
washing machine.
Raise
Turn the !ocknuts counterclockwise and tighten them
when, the washing machine is level.
if you install the washing machine on a slippery surface, it
may move because of excessive vibration, Incorrect leveling
may cause malfunction through noise and vibration. If this
occurs_ hy the non-skid pads under the leveling feet and
adjust the level
Clean the floor to attach the non-skid pads.
- Use a dry rag to remove and dean foreign objects or
moisture If moisture remains, the nonskid pads may
slip.
Adjust the leve! after placing the washing machine in the
installation area.
Phce the adhesive side of the non-.skid pad on the floor.
-It is most effective to install the non-skid pads under the
front legs If it is hard to place the pads under the front
legs, place them under the back legs
Tighten all 4 lock
nuts securely using
the wrench. 4
Remove
backing
Ciseck the washing machine's level again
-Push or rock the top edges of the washing machine
gently to make sure that the washing machine does not
rock. If the washing machine rocks, level the washing
machine again.

INSTALL_]'ION INSTRUCTIONS 17
Plugging in the Power Cord and
Make sure to ground the washing machine to prevent a short
circuit or an etectric shock when plugging in.
Plug in the electrical outlet without additional grounding
WARNING ....................................................................................................................................................................................
•The power outlet must be within 60 inches (1,5 m) of either
side of the washer.
• Re appliance and outlet must be positioned so that the plug
is easilyaccessible.
• Do not overload the outlet with more than one appliance,
•Re outlet must be grounded in accordance v4th current
wiringcodes andr_gu_ions,
• Time delay fuse or circuit breaker is recommended
• It s the personal respons bility andobligation of the product
owner to have aproper outlet instatled by a qualif ed
electrician.
•Do not usea ,wornor damaged power cord or power plug.
Replaceor repair itimmediate[y, Failureto do so may result
in death, fre, electric shock.,or malfunction
• Do not m_ify the power cord and take care not to damage
it when installing or moving the washing machine. Failureto
to!low this warning may result in death, fiie, eiectric shock, or
matflJnction.
•Make sure that the washing ma_ine isgrounded.
• Connect this washing machine to agrounded outlet
conforming to the rating prior to use. Failure to do so may
result in fire, electric shock, or malfunction.
• Do not use adaptors or extension cords, The wash ng
roachne should always be piugged into its own, individual
electricai outlet which has a voltage rating that matches the
rating pate. Faiiure to do so may result in fre, eleGric shock
or malfunction
• Do not damage or cutoff the ground prongof the power
cord, Doing so may cause death, fire, electric shock, or
product malfunction.
Test Run
Check if the washing machine is properly instalbd and run a
test cycle.
1 Load the washing machine with 6 pounds of laundry.
2
3 Press
4Press _,_[i}"
The wash cycle starts.
5Check if water is supplied, that the washing machine
does not rock or vibrate excessively, and that it drains
well during the spin cycle
If water leaks during water supply, see page 14,
Conn_ing the Water Unes to connect them properly,
If the washing machine rocks and vibrates excessively,
see page 16, Leveling the Washing Machine to bvel it
again.
if the drain does not work, see page 15, Connecting the
Drain Line to install it property.

18 PREPAR#FTION
Sorting Wash Loads
Precautions for Fabric Care Before Wash Cycle
Read and observe the following to prevent shrinkage or damage to clothes.
Check ali pockets to make sure that they are empty.
qtems such as ciips, matches, pens, coins, and keys can
damage both your washer and your c_othes_
Close zippers, hooks, and drawstrings to prevent these
items from snagging or tangling on other clothes.
Pretreat heavily stained areas before washing.
_.Doing so will produce clean, stainofree results.
Combine targe and small kems in a load. Load large items
first.
Large items should not be more than half of the tota_
washload.
Brush heavy soil, dust, or hair off fabrics before washing.
Laundry may not wash c_ean if there is dirt or sand on, the
fabrics, or they may be damaged due to particies rubbing
against sheer fabrics.
Wash blankets individuaily.
Washing more than one blanket in a load may produce
inferior results due to tangling or an unbalanced load.
Always separate fabrics according to their co!ors and wash
them separately to prevent colors from running.
oFabrics may be damaged or become stained due to fabric
dyes running, or due to foreign objects transferring from
one fabric to another.
The washer can be fully loaded, but the drum should not be
tightly packed with items.
-The door of the washer should dose easily.
Do not wash single items, except for bulky items such as
Mankets Make sure to wash laundry in similar types of
loads.
- Washing a single small item may result in the tub
becoming unbalanced, vibrating and making a noise.
Do not wash waterproof clothes.
This may cause abnormal vibration, or may cause the load
to bounce, which could damage the tub.
• Check if there are any other foreign objects in the door seal
and take extra care that clothes do not get caught there_
Foreign objects in the door seal may stain clothes_ and
water may leak if clothes get caught in the door seal_
Wash underwear or small, light items in a laundry neL
=Small, iight items may get caught in the door seal, and a
brassiere hook may damage other items or the tub.

PREPARATION 19
Fabric Care Labels
Most articles of clothing feature fabric care labels that include
instructions for proper care.
Washing
Water Temperature
Bleach symbols
_-f,4
W
U¸
oe
o
Hand Wash
Machine Wash, Nermai Cycle
Use Permanent PressiSA#inHe
Resistant washing machine
isett ng lwhich has a cool down or
cotd spray before the reduced
spin}
[L_ Gentle/Delicate washing
machine setting (sow agitation
and or reduced wash time).
Do Not Wash
Do Not Wring
Hot
Warm
CoM/Coo!
Any Bleach (When Needed)
Only NomChtorine Bleach (When
Needed)
Do Not Beach
Sorting Laundry
It is recommended that you sort laundry into similar loads
that are washable in the same cycle.
Refer to the following chart for sorting clothes
Whites/Lights /Darks
Heavy /Normai / Light
Deiicates /Easy Care /Sturdy Cottons
Lint Producers /Lint Coliectors

20 PREPARATION
Using Detergent/Fabric Softener
Recommended Detergent
Make sure to use HE (High-Efficiency) detergent for front_
loading washing machines HE detergents dissolve more
efficiently and produce fewer suds to ensure efficient
washing and rinsing, Use the correct amount of detergent as
indicated on the detergent packaging,
Specially designed to use only
HE (High-Efficiency) detergent
Loading the Dispenser
The detergent dispenser drawer of the washing machine has
a dispenser compartment for each detergent type, Add each
detergent to its appropriate compartment
1 Pul! out the detergent dispenser drawer
NOTE
-Only use HE detergents, because using a regular
detergent may produce excessive suds,
• HE detergents produce fewer suds, dissolve more
efficiently to improve washing and rinsing performance,
and help to keep the interior of your washer clean.
° Use less detergent for soft water.
•Wipe up any spills immediately, as liquids could
damage the finish and the control: panel of the washing
machine
° Using too much detergent can cause a build-up in
the tub resulting in unsatisfactory performance and
machine malfunction.
• if you use a detergent that does not dissolve easily or a
detergent with high viscosity, it will leave a residue on
the tub, which may not rinse properly.
Add each detergent to its appropriate compartment
- if you use a liquid detergent, check if the liquid
detergent cup is in place.
- Jf you use a powdered detergent, remove the liquid
detergent cup and put the powder in the main wash
detergent compartment.
Liquid
bleach
compaflment
Liquid
detergent
cup
j
-Liquid fabric
softener
corn parfmenf
_2
Main wash Pre-wash
detergent detergent
compartment compartment
Close the detergent dispenser drawer slowly.
Slamming the detergent dispenser drawer may resuJt in
the detergent overflowing into another compartment or
pouring into the tub earlier than programmed