Libelium Kerlink IoT Application Development Kit User manual

Libelium-Kerlink Development Kit
Quick Start Guide

-2-
IoT Application Development Kit
INDEX
1. Identify the products........................................................................................................................... 3
2. Kerlink Wirnet iBTS LoRaWAN Base Station ...................................................................................... 3
3. Open the box........................................................................................................................................ 3
4. Recharge Plug & Sense!....................................................................................................................... 4
5. Antennas set up ................................................................................................................................... 4
6. Identify Plug & Sense! family.............................................................................................................. 5
7. Check connection diagram ................................................................................................................. 7
8. Sensors setup....................................................................................................................................... 7
9. Connect sensors................................................................................................................................... 8
10. Connect Solar Panel .......................................................................................................................... 8
11. Turn ON Plug & Sense!....................................................................................................................... 9
12. Next Steps .......................................................................................................................................... 9

-3-
IoT Application Development Kit
1. Identify the products
2. Kerlink Wirnet iBTS LoRaWAN Base Station
To know how to install the WIRNET STATION 868 MHZ LoRaWAN Base Station please, visit Kerlink website.
3. Open the box

-4-
IoT Application Development Kit
4. Recharge Plug & Sense!
5. Antennas set up

-5-
IoT Application Development Kit
6. Identify Plug & Sense! family
Smart Environment Smart Environment PRO Ambient Control
Smart Agriculture Smart Cities PRO

-6-
IoT Application Development Kit
Smart Water Smart Water Ions
Smart Security 4-20 mA Current Loop
Smart Parking Radiation Control

-7-
IoT Application Development Kit
7. Check connection diagram
8. Sensors setup

-8-
IoT Application Development Kit
9. Connect sensors
10. Connect Solar Panel

-9-
IoT Application Development Kit
11. Turn ON Plug & Sense!
12. Next Steps
• Your Key Account Manager will put you in contact with the person in charge of the software services provider.