Lifa Air LAX200 User manual

LAX200 Smart Air Purifier
User Manual
IMPORTANT!
Please read the user manual before using the product, and do keep securely for future reference.
WARNING:
Before first time use, you must take out the HEPA filter and remove the protective plastic bag.
1

Contents
1. Important Safety Information
2. Package Contents
3. Functions
4. Technology
5. FIlter Removal and Installation
6. Using the Air Purifier
7. Touchscreen and Functions
8. AUTO mode
9. Filter Replacement
10. Filter Care
11. Cleaning the Air Quality Sensor
12. Specifications
13. Troubleshooting
3
4
4
5
6
7
8
9
10
10
11
12
13
Lifa Air Plc
Eteläranta 14, 6th floor
00130 Helsinki, Finland
www.lifa-air.com
Customer service: [e-mail]
2

Only use attachments/accessories provided by the manufacturer.
Keep the machine away from children to avoid accidents.
Do not block any ventilation openings. Install the machine in accordance with the manufacturer’s
instructions.
Make sure the machine stands in the upright position, never operate the machine when in other
orientations.
Unplug the machine when it is not being used for a long period of time. Do not use this machine
in rooms with large temperature differences to avoid water condensation inside.
Protect the power cord from being walked on or pinched. Please switch off and unplug the
machine before moving it or cleaning and/or replacing the filters.
Do not use this machine in high temperature and/or humidity environments, such as bathrooms.
Never open the power adapter to avoid electric shock and impact on warranty.
For user safety and product protection, do not sit or lean on the machine. Do not put objects into
the movable portion, the air inlet and/or outlet. Do not place the product directly under air
conditioning units to prevent condensed water droplets.
With the exception of professional maintenance personnel, please do not attempt to repair the
product.
To prevent electric shocks, be sure to follow the requirements of the method and manner of this
manual for cleaning and maintaining the product. Please do not try to maintain the product in any
other way. Please ensure that the machine is used only with the power supply unit provided with
the appliance.
Safety marking label of main unit is on the bottom plate of the product.
Correct disposal of this product. This marking indicates that this product should
not be disposed with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take
this product for environmental safe recycling.
•
•
•
•
•
•
•
•
•
•
•
•
•
Power warning:
Place the product near the power outlet.
Before use, make sure that the operating voltage is the same as your local power supply. Correct
operating voltage can be found on the product plate. For safety purpose, unplug the product
during lightning storms or when unused for extended periods of time.
Under normal conditions, the power supply may get hot. Please keep good ventilation in the area
and exercise caution.
Safety warning labels on the housing or bottom of the product or power adaptor:
This symbol is to warn the user not to disassemble the enclosure of the product
and there is no user-replaceable part inside. Take the product to an authorized
service center for repair.
This symbol indicates that the product is for indoor use only.
This symbol signifies that the product have been assessed to meet high safety,
health, and environmental protection requirements in the European Economic
Area (EEA).
This symbol indicates that the product is compliant with the regulation that
restricts the use of specific hazardous materials found in electrical
and electronic products.
1. Important Safety Information
3

2. Package Contents
Touchscreen
Air Outlet
Dust Cover
(for the air
quality sensor)
DC power
connector
(connect to the
power adapter)
Serial number
and product
information
Replaceable
HEPA Filter
3. Functions
Power cable Power adapterHEPA filterAir purifier
main unit
1 x 1 x 1 x 1 x
4

Touchscreen
You can control all
the functions of your air
purifier through the
touchscreen.
A
Fan
Powerful yet quiet fan
capable of delivering
170 m³/h of filtered
fresh air.
B
Ioniser
Anion generator creates
negative ions that attach
to and destroy harmful
airborne particulates.
Ioniser is OFF by default,
please turn it ON from the
touchscreen.
D
Air quality sensor
Built-in air quality sensor
monitors the surrounding
air quality and adjusts the
purifier automatically.
E
UV Light
UV light works together with
filter materials to remove
harmful contaminants from
the air.
The UV light is OFF by default,
please turn it ON from the
touchscreen.
F
All-In-One
HEPA H13 Filter
6G Filter combines industry
standard high efficiency particle
filter HEPA H13 with activated
carbon material. The inner filter
surface is coated with an
antibacterial titanium dioxide
coating.
C
4. Technology
5

5. Filter removal and installation
1. Turn the air purifier upside down. To protect the touch screen from damage, place the device on
top of a soft fabric or other suitable material.
2. Turn the handle counterclockwise to unlock the filter and lift the filter out of the device.
3. Make sure to remove the
protective plastic bag around
the HEPA filter
4. Push the HEPA filter back into the device and
turn the handle clockwise to lock the filter in place.
ATTENTION! Before using the device for the first time, you must remove the filter from the device and
remove the protective plastic bag around it. Please follow the steps below to do this.
You can now start using your air purifier!
6

120 cm (from the ceiling)
15 cm (from the wall)15 cm (from the wall)
6. Using the air purifier
To optimize the performance of the product, please place the air purifier at least 15 cm away from nearby
walls and at least 120 cm from the ceiling.
Remove all the protective plastic wrapping from the power components. Take out the power cord and connect
to the power adapter. Connect the adapter to the main unit & plug in the power.
The air purifier will beep and you can now start using its functions
7

7. Touchscreen and Functions
SLEEP
Use this function to enjoy a quiet and a comfortable sleep. In this mode, the display lights will turn
off and the purifier will be running at a low fan speed.
IONISER
Turn the anion generator to enhance the air purification efficiency of the purifier.
NOTE! Ioniser is OFF by default.
FILTER REPLACE
This icon will start flashing to alert
you the filter is reaching the end of its
lifetime. Please change the filter.
TIMER OFF
Use this function to set the time between 1-12
hours until you want the machine to turn OFF.
SPEED
Manually adjust the fan speed between
4 different levels. Setting to AUTO mode
will allow the machine to automatically
adjust the fan speed according to
the air pollution level detected.
UV LIGHT
Turn on the UV light to enhance the
air purification efficiency of the
purifier.
NOTE! The UV light is OFF by default.
CHILD LOCK
Use this mode to lock all the functions,
thus preventing accidental changes.
Press and hold for 3 seconds to
lock/unlock.
TIMER ON
Use this function to set the time between 1-12
hours until you want the machine to turn ON.
3
4
5
6
7
8
1
2
1
3
4
58
7
6
2
Use the power button to switch the purifier on/off.
ON/OFF
8

8. AUTO mode
When you turn on the air purifier , the device will go into “AUTO mode” by default. In AUTO mode the air
purifier is actively measuring the surrounding air quality and adjusting the fan speed accordingly.
The LED ring will indicate the level of air pollution by displaying different colours.
The AUTO mode can be turned off by manually adjusting the fan speed .
The touchscreen will display the PM2.5 reading indicating the quality of the surrrounding air.
The reading starts from 10 µg/m3 which equals clean air.
5
5
GREEN = Clean Air Yellow = Small To Medium
Amounts Of Air Pollution
Red = High Amounts
Of Air Pollution
Colour codes for air pollution levels:
9

NOTE!
The standard time for filter replacement is 3000 hours of usage. The filter's lifetime will depend on the
usage environment. In high pollution environments the usage time is less than in normal conditions.
WARNING!
Do not to damage nor dent the surface of the filter.
Do not wash the filter with water. Keep away from heat and wet.
Do not touch the surface of the filter.
WARNING!
In order to absorb and purify harmful gases, the filter core contains activated carbon material.
It is highly recommended to wear a face mask during filter cleaning and/or replacement.
9. Filter replacement
The FILTER REPLACE button will start flashing once the operating time reaches the end of the filter's
lifetime. It is then highly recommended to replace the 6G filter to keep running the air purifier at the maximum
efficiency.
After installing a new filter, press and hold the FILTER REPLACE button for 3 seconds to reset the built-in timer.
6
6
10. Filter care
Never wash the filter or try to wipe it clean with wet towel. You can
use a vacuum cleaner or a dry brush to clean the outside surface
of the filter. Do not touch the surface of the filter as it may contain
harmful contaminants/particulates.
6
Titanium Dioxide Coating
Air seal gasket
High Efficiency Particle Filter
with Activated Carbon
10

11. Cleaning the air quality sensor
When the lens of the sensor is stained or contaminated by moisture, particulates or smoke,
the sensitivity of the sensor drops. Please follow the cleaning procedure below:
ATTENTION! For optimal
function, clean the sensor
monthly.
1. To remove the dust cover, press firmly with your fingers from the left side of the cover to release
the locking mechanism. Continue to push from the left side and pull the cover off.
2. You can either use a vacuum cleaner or a hair dryer to remove the dusts on the sensor holes.
Use a damp cloth or a cotton bud to clean the sensor lens and dry it out afterwards.
Sensor Holes
Sensor Lens
11

LAX200 Smart Air Purifier
LAX200
220-240 V~ 50/60 Hz
24V DC
20W
25 m²
170 m³/h
ABS
Diameter 218 mm, Height 350 mm
3 kg
Normal mode: 23 dB(A) — Turbo mode: 62 dB(A)
5-45 °C
Product Name:
Model No.:
Input Voltage (adapter):
Output Voltage (adapter):
Rated Power Rate:
Effective area:
CADR:
Main product material:
Product size:
Product weight:
Operating noise (4 fan speeds):
Operating ambient temperature:
12. Specifications
Lifa Air Plc
Eteläranta 14, 6th floor
00130 Helsinki, Finland
www.lifa-air.com
Customer service: [e-mail]
12

LAX200 Smart Air Purifier
LAX200
220-240 V~ 50/60 Hz
170 m³/h
ABS
Diameter 218 mm, Height 350 mm
Normal mode: 23 dB(A) — Turbo mode: 62 dB(A)
No exhaust
No change of air volume
The air volume decreases
compared to the newly
purchased unit.
Symptoms Check Fix
Peculiar smell on air outlet
"Clean filter" alert flashes
Discharge of black powders
from the filler can be seen.
An odor fails to dissipate.
Not react to "dust" and
"odor" although setting as
the auto mode.
Is the filter removed from the plastic bag?
Is the filter installed correctly?
Is the filter blocked?
Air flow volume might temporarily drop
due to special circumstances.
Please confirm the current "running mode"
is not set to "auto mode" or "sleep mode"?
Check if the filter is new.
Is it used in the space with odor causing
discharge or a large number of peculiar
smell discharged from cooking?
Filters containing activated carbon
sometimes emit a slight strong aroma.
Is it moved from other room?
Has the filter replacement
reminder been reset?
This is the raw activated carbon content of
the filter.
The deodorization ability of the filter can be
automatically restored at a corresponding
degree. It may not be restored depending
on environment of use.
Odor sensed continuously at certain degree.
Please sweep the filter surface and collect the
loosen activated carbon powders during the
filter replacement.
Remove the filter and air-dry for at least 12
hours in a well-ventilated place.
Look for factors that continuously be a source of
odor (like pets, paint etc.) The machine cannot
totally eliminate it, Proper ventilation of the
space might be needed.
Please reset the" Filter Replace" button by
holding it for 3 seconds.
Due to high performance activated carbon as
the raw material, it may be sweet at the
beginning of use. Generally the initial odor may
decrease after using for about a week.
The filter has the nature of adsorbing the odor,
so it will accumulate the odor temporarily. After
a short period of operation, the smell wiil
gradually weaken.
After a short period of operation, the smell will
gradually weaken.
Sometimes it is the odor from the previously
used location. The odor will decrease gradually
after short-time running.
Is the sensor blocked by the wall or any
barrier?
In the case of being blocked, please remove
the barrier. In the case of no barrier, please
clean the sensor· at the back of the machine.
Remove the plastic bad before using.
Please confirm whether the filter is installed
correctly.
Please clean the filter.
It is required to replace the filter in the case of
no improvement.
Please confirm whether the "running mode"
can be changed by the "mode switch button".
13. Troubleshooting
13

Lifa Air Plc
Eteläranta 14, 6th floor
00130 Helsinki, Finland
www.lifa-air.com
Customer service: [e-mail]
14