Life Fitness GBHP User manual

1Page 1 of 9
HAMMER STRENGTH EQUIPMENT
GBHP – Ground Base High Pull
Customer Support Services
PARTS MANUAL

2Page 2 of 9
HAMMER STRENGTH EQUIPMENT
NOTES:

3Page 3 of 9
HAMMER STRENGTH EQUIPMENT
TABLE OF CONTENTS
PAGE
EXPLODED ASSEMBLY..................................................................................................4
CENTER BRACKET .........................................................................................................5
FRONT CROSSMEMBER.................................................................................................6
LEFT MOVEMENT ARM...................................................................................................7
LEFT SIDE FRAME...........................................................................................................8
TOP CROSSMEMBER......................................................................................................9

4Page 4 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Exploded Assembly
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-CFX-0 Front Crossmember Assembly
2 1 GBHP-CSFR-0 Right Side FrameAssembly
3 1 GBHP-CSFL-0 Left Side Frame Assembly
4 1 GBHP-CTX-0 Top Crossmember Assembly
5 2 GBHP-BX-0 Bottom Crossmember Assembly
6 1 GBHP-CETC2-0 Center Bracket Assembly
7 1 GBHP-CMAL-0 Left Movement Arm Assembly
8 1 GBHP-CMAR-0 Right Movement Arm Assembly
9 12 H-BACK WASH Backing Washer
10 12 HHB.5X3 1/2 X 3 Bolt
11 4 HHB.5X4.5 1/2 X 4 1/2 Bolt
12 22 WASH.5STAR 1/2" Internal Lock Washer
13 18 NUT.5LOCK 1/2" Thick Lock Nut
14 2 HHB.5X4 1/2 X 4 Bolt
15 4 SELECTOR PIN-4 SELECTOR PIN 4 INCH

5Page 5 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Center Bracket
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-ETC2-0 Center Bracket
2 2 H-BUMP-MED MM2 Medium
3 4 WASH.5STAR 1/2" Internal Lock Washer
4 2 HHB.5X3.5 1/2 X 3 1/2 Bolt
5 2 HHB.5X3 1/2 X 3 Bolt
6 4 WASH.5SAE 1/2" SAE Flat Washer
7 4 NUT.5LOCK 1/2" Thick Lock Nut

6Page 6 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Front Crossmember
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-FX-0 Front crossmember
2 2 H-BENDCAP Bullet Cap
3 2 H-RUBRNG MM5 Ring
4 1 H-NAMEPLATE Name Plate
5 1 GROUND BASE HIGH PULL Product Decal

7Page 7 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Left Movement Arm
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-MAL-0 Left Movement Arm
2 2 ACCORDIAN Shaft Guard
3 3 H-BENDCAP Bullet Cap
4 2 H-RUBRNG MM5 Ring
5 2 H-PEND3 1 1/2 X 3 End Cap
6 1 WARNING LARGE-HLarge Warning Hor
71H-GRIP(GBSL-A00)HandGrip
82H-GRIP HandGrip
Note: LEFT SIDE shown. RIGHT SIDE mirror image.
Do Not put Warning LARGE-H on CMAR-0.

8Page 8 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Left Side Frame
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-SFL-0 Left Side Frame
2 4 H-BACK WASH Backing Washer
3 2 H-HPLUG(REG) Hole Plug
4 2 H-PEND3 1 1/2 X 3 End Cap
5 4 HHB.5X3 1/2 X 3 Bolt
6 2 H-BEAR-SML Small Bearing
7 4 NUT.5LOCK 1/2" Thick Lock Nut
8 2 STAY CLEAR Stay Clear Decal
9 1 PATENT Patent Decal
10 1 SERIAL NUMBER Serial Number
Note: LEFT SIDE shown. RIGHT SIDE mirror image.
Do Not put Patent on CMAR-0

9Page 9 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Top Crossmember
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-TX-0 Top Crossmember
2 2 H-BUMP-MEDMM2 Medium
3 4 WASH.5SAE 1/2" SAE Flat Washer
4 2 WASH.5STAR1/2" Internal Lock Washer
5 4 STAY CLEAR Stay Clear Decal
62NUT.5LOCK1/2"ThickLockNut
7 2 HHB.5X3.5 1/2 X 3 1/2 Bolt