Life Smart LS-932 User manual

version:1.1
TM
Manufactured For: GENESIS BIOTECH PTY LTD
Address: Level 1, 16 McDougall Street, MILTON QLD
4064 www.mylifesmart.net.au
CONTACT US
For Australia & New Zealand
customers [email protected]
Australian customers 1300 110 155
User Manual
Activity & Sleep Tracker
LS-932
Thank you very much for selecting the
LifeSmart Activity & Sleep Tracker LS-932.
Please do read the user manual carefully and
thoroughly so as to ensure the safe usage of
this product, and keep the manual well for
further reference in case you have problems.

Table of Contents
Table of Contents
Symbol Meaning
Symbol Meaning.......................................................2
Overview
General Instructions....................................................3
Device Components ................................................
3
OLED Display....................................................... 4
Initial Start-Up
How to Turn on the Activity & Sleep Tracker for Your First Use...............5
How to Charge the Power..............................................5
Install the App and Pair-up .............................................6
How to Wear the Activity & Sleep Tracker .................................7
Start Measuring
How to Use ...........................................................8
How to View the Data ..................................................9-10
Troubleshooting .................................... ...................11-12
Specifications ..........................................................13
Maintenance............................................................14
Warranty ...............................................................14
Warning ................................................................14
Activity & Sleep Tracker Care ...........................................15
Built-in Battery Care....................................................15
Health Disclaimer.......................................................15
Other Notes ............................................................15
1

Symbol Meaning
Symbol Meaning
The warning signs and symbols are essential to ensure your correct
and safe use of this product and protect you and others from injury.
Please kindly find the meanings of the warning signs and symbols,
which you may encounter in the label and user manual, as follows:
Symbol for “THE OPERATION
GUIDE MUST BE READ”
Symbol for “Including RF
transmitter”
Symbol for “DIRECT CURRENT”
Symbol for “MANUFACTURE DATE”
The Bluetooth Combination Mark
ENABLED
Symbol for “MANUFACTURER”
Symbol for “COMPLIES WITH EU
REQUIREMENTS”
Symbol for “ENVIRONMENT
PROTECTION –Waste electrical
products should not be disposed of with
household waste. Please recycle where
facilities exist. Check with your local
authority or retailer for recycling advice”
Overview
General Instructions
Thank you for selecting LifeSmart Activity & Sleep Tracker LS-932.
This device is used for measuring steps walked, distance covered,
consumed calories and monitoring sleep quality.
This device is Bluetooth 4.0 enabled. It is supported with the
LifeSmart smartphone application. The data in the Activity & Sleep
Tracker is wirelessly uploaded to the smartphone application which
supports Bluetooth 4.0.
The user can access the data anywhere and at
anytime. Main Features:
a. Support the Bluetooth 4.0 technology
b. OLED display
c. Display steps walked, distance covered, the consumed
calories and the current time
d. Track the quality of sleep
e. Alarm clock vibration reminder function(this function can be set
on the app)
Device Components
OLED Display USB Interface
Button
Charging Icon
Wrist Band
Wristband Button
Wristband
Box Contents
1. Activity & Sleep Tracker LS-932 (including Polymer Lithium Battery)
2. User Manual
3. Wristband (large and small)
4. Warranty Card
23

Overview
OLED Display
Steps
0
17:00
The Current Time
0.0
The Consumed Calorie (kcal)
The Walking Distance (km)
0.00
Alarm Clock
17:00
Press the Button Can Stop the Alarm Clock
Sleeping Mode
0
The Moon Icon Blinks
How to Turn on the Activity Tracker
To save the battery the device is hibernated or in shipping mode
before first use. To activate the device, please press and hold
the key for 8 - 10 seconds, then the device will recover to normal
mode.
NOTE
(1) When the device is in the shipping mode, if you charge the
power, it will divert to the normal mode, then you can start
your measurement.
(2) When the shipping mode is removed, the Activity &
Sleep Tracker will display the initial time: 0:00.
(3) After pairing up with the mobile phone, the Activity & Sleep
Tracker will download the time from the mobile phone, and it
will display the current time.
Initial Start-Up
How to Charge the Power
When the OLED displays the following symbol, it reminds
you to charge the power or the battery is almost empty.
Connect the USB interface with the computer to charge
the device battery.
When the device is charging, the OLED will display as
the following picture. The power symbol blinks.
The OLED displays as the following picture, it means
the charging is complete.
NOTE
The Mini USB port is only used for charging the power, but
can not be used for transmitting the data to the computer.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
45

Initial Start-Up
Install the App and Pair-Up
Download and install the LifeSmart app in your smartphone
which supports Bluetooth 4.0 technology.
Turn on Bluetooth and the App. Make sure both are ON
when pair-up is proceeding.
When the OLED is on, press and hold the button on the Activity &
Sleep Tracker about 8 - 10 seconds to start pair-up.
Symbol and symbol will be shown on the
OLED alternatively, indicating pair-up is
proceeding.
If SUCCEED, symbol “ Success!” will be
shown on the screen.
Success!
If FAIL, symbol “Fail!” will be shown on
the screen.
Fail!
To finish, set your weekly goal (70,000 steps / week is the
goal recommended by the WHO).
The measuring data will be transmitted to your device which supports
Bluetooth 4.0 technology when the pair-up is successful.
Initial Start-Up
How to Wear the Activity & Sleep Tracker
1. For first wear, insert the wristband which has the USB icon into
the USB interface of the Activity & Sleep Tracker.
2. Insert the wristband which has the button hole into the
other interface of the Activity & Sleep Tracker.
3. Wear the Activity & Sleep Tracker just like wearing a watch. Remember
the wristband which has USB icon on it must face to you.
4. Press the wristband button into the wristband button hole to
adjust the suitable wristband length.
5. Then you can start your measurement.
2865
Whether you wear it on your left or right arm, please make sure that
the button is oriented to your arm and not to your hand.
2865
button
67

Start Measuring
How to Use
Follow the instructions in the manual to wear the Activity & Sleep
Tracker. Then it can start the measurement.
0
10
11
Start Walking
10 Steps
More than 10 steps
(within 10 steps)
(the numeral increases)
The measuring data will be transmitted to your smartphone which
supports Bluetooth 4.0 technology if you have paired up with it,
with help of your free LifeSmart app.
View the Data
How to View the Data
When the screen is off, and there is enough power, press the
button on the activity tracker, the screen will display your
activity achieved.
Note: all data are reinitialized to 0 at midnight but data are
saved in the device during 7 days if they haven’t been
synchronized with the app.
Number of steps
Distance
2715
2.36
Calories burned
Time
158.4
10:43
When the battery is almost empty, this first symbol will be
displayed on the screen each time you activate the
device with the button. The second symbol is displayed
when the battery is completely empty and the device is
not working anymore until you recharge it.
Battery almost empty Battery empty
CAUTION
Note: The data of the day will be cleared to zero
automatically when the time is 00:00. The data cannot
be cleared to zero manually.
89

View the Data
Tracking Sleep on Your Mobile Device
The Activity & Sleep Tracker can track the hours you sleep and your
movement during sleep to help you understand your sleep quality.
You can track your sleep using the app on your mobile device.
To enter sleep mode, press and hold the button on the side of the
Activity & Sleep Tracker. You will feel a vibration and a moon icon
will flash on the display, indicating that sleep mode has begun.
541
541
When you wake up, exit sleep mode by pressing and holding the button
until it vibrates. The moon icon will disappear from the display.
541
541
Alarm Clock Reminder Function
The Activity & Sleep Tracker has the Alarm Clock Reminder Function
. You can set the alarm clock through the app on your mobile device.
Then press the button of the Activity & Sleep Tracker to finish the
setting.
When the setting time is coming, the Activity & Sleep Tracker
vibrates, displays the current time, and the alarm clock icon blinks.
The intensity of vibration will increase gradually.
Press the button on the side of the Activity & Sleep Tracker to stop the
vibration in five minutes. Otherwise, it will stop vibration five minutes later
automatically. At this moment, the Activity & Sleep Tracker will display the
current time and the unblinking alarm clock icon.
Troubleshooting
Troubleshooting
Problem
Root Cause
Solution
Please check below items:
-Bluetooth is ON.
Fail!
Failure of pairing
-App is ON.
up
-Both devices are within the
transmission distance of
Bluetooth.
Incorrect portable
Use the correct portable
fashion make the
fashion, avoid that the
Abnormal
device has
Activity & Sleep Tracker
irregular shaking
has irregular shaking
measuring results:
Huge difference
between two recent
measurement.
Less than 10
Continue to walk more
steps
than 10 steps
10 11

Troubleshooting
Problem
Root Cause
Solution
The power is not
Charge your activity
tracker.
No display on
enough.
OLED when the
device powers on.
The device didn’t
Long press button for
logout the shipping
8 - 10 seconds, the
mode for the first
device will recover to
measurement.
the normal mode.
The device
Low battery.
Please charge your
powers off.
activity tracker.
Bluetooth is OFF.
Turn ON the Bluetooth
in your smartphone
Data transmission
The App is OFF.
Press the icon to turn
failed.
ON your app.
Out of range of
Place your device
which supports the
Bluetooth
Bluetooth 4.0
transmission.
technology closer
to the Activity & Sleep
Tracker.
Specifications
Specifications
Product Name
Activity & Sleep Tracker (LS-932)
Dimension
195x20x10 mm (Approximately)
Net Weight
Approx. 19 g
Display
Blue OLED
V.A.:22.4mm x 5.6mm
Steps
0-120000 steps, division 1 step
Calories
0-12000.0 kcal, division 0.1 kcal
Exercise Time
0-23 hours and 59 minutes,
division 1 minute
Battery Grade
1-7 grade, division 1 grade
Battery Life
≥7 days when fully charged
and doing sports for 8 hours per day
Power Source
3.7V / 70mAh polymer lithium battery,
Input:5V
60mA
Temperature: 0℃to 40℃
Working Environment
Relative Humidity: ≤90% RH
Atmospheric Pressure: 80 kPa ~ 106 kPa
Storage Environment
Temperature: -20℃to 60℃
Relative Humidity: ≤90% RH
Atmospheric Pressure: 50 kPa ~ 106 kPa
Accessories
1. Wristb and (large and small)
2. User Manual
3. Warranty Card
Distance
about 65.36km
Accuracy of steps
500±20 steps
12
About the Accuracy of This Product
This product passes strict inspection before delivery and therefore its accuracy is
guaranteed by the manufacturer. Please refer to the above table for the
descriptions on accuracy.
WARNING: No modification of this equipment is allowed.
13

Maintenance
Maintenance
When carrying out usual maintenance, please ensure practice of
the following Do’s and Don’ts:
DO use a dry soft cloth to wipe the dust.
DO use a wet soft cloth, dipped into water and wrung out, to wipe
the dirt. Then use a dry soft cloth to dry up the device.
DON’T wash the device with water or immerse it in water.
DON’T use propellant, abrasive or other chemicals to wipe the dirt
in avoidance of discolor or malfunction.
DON’T disassemble this device. If you have any problems, please
contact LifeSmart. (Please refer to Warranty for contact information)
Charge the power once for every 3 months, or at least once for half a
year, if the device is not likely to be used for a long time.
Warranty
LifeSmart warrants its products free of defects in materials and
workmanship in normal use for a period of ONE year from the date
of retail purchase.
This warranty does NOT cover damages caused by misuse or
abuse, including but not limited to:
Failure caused by unauthorized repairs or modifications;
Damage caused by shock or drop during transportation;
Failure caused by improper operation inconsistent with the
instructions stated in this user manual;
Malfunction or damage from failure to provide the
recommended maintenance;
Damage caused by improper use of power supply.
Should this device require maintenance (or replacement at our option)
under warranty, please deliver the original package to GENESIS BIOTECH
PTY LTD. Please return the store receipt (with the retail purchase date) and
a note with reasons to return on it as well.
GENESIS BIOTECH PTY LTD
Level 1, 16 McDougall Street, MILTON QLD 4064
www.mylifesmart.net.au
Warning
While your Activity & Sleep Tracker is designed to be worn 24/7, its
components are electronic and susceptible to damage if used
improperly. Please read the safety guidelines on the following pages
to ensure proper use and care.
14
Warning
Activity & Sleep Tracker Care
•Do not expose your Activity & Sleep Tracker to liquid, moisture,
humidity, or rain while charging. Exposure of the Activity & Sleep
Tracker to moisture while charging could result in electric shock.
•Do not tamper with or abuse the Activity & Sleep Tracker. For
example, without limitation, do not drop, disassemble, open, crush,
excessively bend, deform, puncture, shred, microwave, incinerate,
paint, or insert foreign objects into the Activity & Sleep Tracker.
•Do not use abrasive cleaners to clean your Activity & Sleep Tracker.
•Do not expose your Activity & Sleep Tracker to extremely high or
low temperatures.
•Do not leave your Activity & Sleep Tracker near open flames such
as cooking burners, candles, or fireplaces.
•Do not bring your Activity & Sleep Tracker into contact with any
sharp objects. This could cause scratches and damage.
•Do not insert anything into your Activity & Sleep Tracker unless
otherwise specified in the user instructions. This may damage
the internal components.
•Do not attempt to repair, modify, or disassemble your Activity &
Sleep Tracker; it does not contain any user-serviceable components.
Built-in Battery Care
•Do not attempt to replace your Activity & Sleep Tracker’s battery. It
is built-in and not changeable.
•Only charge the battery in accordance with the user
instructions supplied with the Activity & Sleep Tracker.
•Avoid charging your Activity & Sleep Tracker in extremely high or
low temperatures.
•Do not wear your Activity & Sleep Tracker while you are charging it.
•Do not attempt to disassemble the Activity & Sleep Tracker or force
open the built-in battery.
•Do not clean the Activity & Sleep Tracker when it is being charged.
Always unplug the charger first before cleaning the Activity &
Sleep Tracker.
•Do not dispose of your Activity & Sleep Tracker in a fire. The
battery could explode causing injury or death.
Health Disclaimer
WARNING: THIS Activity & Sleep Tracker IS NOT A MEDICAL
DEVICE. The Activity & Sleep Tracker and its associated applications
should not be used to diagnose, treat, or prevent any disease or
medical condition. Always seek the advice of a qualified medical
professional before making any changes to your exercise, sleep or
nutrition, as doing so may cause severe harm or death.
Other Notes
•Dispose of the Activity & Sleep Tracker, the Activity & Sleep
Tracker’s battery in xaccordance with local regulations. Do not
dispose of the battery with regular household waste.
• Recycle your package in accordance with local regulations.
15