lifelong Titanium Plus 750 W User manual

Manufactured Market by:
Lifelong Online Retail Private Limited
For queries and complaints:
www.lifelongindiaonline.com
Titanium Plus 750 W
Mixer Grinder
with 4 Jars
Anti-Skid
Feet
Auto
Power-Off
ISI
Certified
Powerful
750W Motor
Handle designed for
Better Grip
Stainless
Steel Jars
IS:4250:1980
CM/L NO.9100123297
A

CLEANING
IMPORTANT
INTRODUCTION:
Welcome to the Lifelong family.
Dear Customer,
Congratulations on purchasing Lifelong Titanium Plus 750 W Mixer Grinder with 4 Jars and
a warm welcome to the Lifelong family. At Lifelong, we take pride in developing
quality products for your home, health and happiness. Through constant innovation in
our products, we have been able to develop a wide spectrum of products across Home,
Kitchen, Grooming and Wellness categories. We strive to enrich the lives of the modern
consumer every day. Keeping that in mind, we have offered all our products at a fair and
honest price.
We hope that the Lifelong Titanium Plus 750 W Mixer Grinder with 4 Jars serves you and
your family’s needs without any hassles.
Thanks again for becoming a part of the Lifelong family. Enjoy using the product!
Warm Regards,
Team Lifelong
12
PRECAUTIONS BEFORE USE
• Keep the Lifelong Titanium Plus 750W Mixer Grinder With 4 Jars away from heat
and sunlight.
• Clean the jars carefully before use.
• Do not place the machine on a wet surface.
• Never try to touch the moving parts or blades of the mixer grinder while in
operation.
• Fix the jar to the base unit by turning it clockwise.
• Make sure it is firmly locked in position prior to usage.
• Never insert your hand or spatula or spoon, when in use.
• Never operate the mixer grinder without the jar lid.
a. Jar lid f. Overload protector (at the bottom)
b. Jar handle g. 3 Speed control knob
c. Top socket h. Dry grinding jar
d. Liquidiser jar i. Chutney jar
e. Motor unit j. Juicer jar
a
b
c
d
e
fg
h
i
j

4
3
HOW TO USE
FRUIT FILTER JUICER JAR
• Insert the fruit filter into the blender jar and rotate it slightly so that
it settles down and the grooves get locked with the slugs on the
blender jar wall.
• Place the lid on the jar and rotate it anti-clockwise to lock.
• Place the assembly onto the drive shaft of the juicer mixer grinder
and rotate clockwise to lock it into position.
• Cut small pieces of fruits to be juiced.
Fig 1
• When removing the blade please keep the washer in a good condition for fitting
again.
• The jars can be cleaned by using regular dishwashing soap.
• After thoroughly rinsing with soap, clean the jars with a dry cloth.
• Never store the jars with closed lids.
• Do not use any detergent soap solutions on the main body.
• Clean the body with a dry cloth before storing for next use.
• Never immerse the motor in the water for cleaning
• Since the blades are quite sharp, be careful while changing them
• Never pull the cord to take out the plug from the socket
• Always switch off the power supply button before cleaning, emptying or when
not in use.
• For citrus fruits like oranges and sweet limes it is advisable not to use the
plunger so that the seeds pop up automatically. However, for best results cut
the fruit into small pieces and remove the seeds before extracting juice
• Do not use the Liquidizer jar for dry/wet grinding, grating, chopping or mincing
functions.
• Do not worry if you experience some burning smell when you run your mixer grinder
for the first time.
This is due to the motor varnish getting heated for the first time. The problem
should not recur in subsequent uses. If it does, please contact our customer care.

56
STEP 1: The wet /dry grinding jar (refer fig 3) is used for grinding
items like ldli and dosa batter, coconut chutney, groundnut, red
chili powder, sugar, palak etc.
STEP 2: Make sure that the dry grinding jar is absolutely clean and
dry before use.
STEP 3: Use small pieces of ingredients for grinding.
STEP 4: Fill the jar with ingredients up to the marked capacity.
WET/DRY GRINDING
Fig 3
STEP 5: Put the flat lid on top of the Jar. Grind at low speed for 15-30 seconds and
then move to higher speed.
Note: Always move gradually from lower speeds to higher speed.
During grinding process, the jar might gethealed up due to friction.
Do not panic. This happens gradually.
STEP 1: The chutney jar (refer fig 4) is mainly used for
making chutney.
STEP 2: Use small pieces of ingredients for grinding.
CHUTNEY MAKING
Fig 4
• Remove the cap on the lid by rotating anticlockwise. Put the cut pieces into the filter
and switch on the juicer mixer grinder.
• You can continue adding more fruit pieces from the centre opening in the lid as they
are juiced.
• The juice is sieved out through the filter and the pulp/seeds get accumulated inside
the filter and pour out the contents from the jar by tilting.
LIQUIDIZING AND BLENDING
STEP 1: The Liquidizing and blending jar (refer fig 2) is used for
preparation of shakes, juices etc.
STEP 2: Before starting the mixer grinder for the first time or after a
long period of time, rotate the motor shaft with hand to ensure
that it turns freely and smoothly.
STEP 3: Place all the ingredients in the jar and put the lid properly
STEP 4: Now switch on the grinder for operation
Note: Do not use this jar for wet grinding.
Fig 2

7 8
Step 3: Put the ingredients in the chutney jar for grinding. Hold the lid tightly
so that it won’t get healed up.
STEP 4: The ingredients should not be too large. Break ingredients into
smaller pieces.
Note: The lid should be properly pressed.
OVERLOAD PROTECTION
CLEANING INSTRUCTIONS
• The overload protector (OLP) is designed to protect the
motor (refer fig 4) from burning.
• In case of an overload, the blade of the jar stops rotating and
the motor gets jammed or starts heating up.
• If such a situation occurs the mixer grinder will automatically
trip off and hence protect the motor.
• Let the motor cool down for a couple of minute. The red
button of the overload protector switch located at the bottom
of the mixer grinder has to be pressed for re-operation.
• If you have to reset the OLP again and again, try reducing
the quantity of ingredients in the Jar.
Overload Protector
• Before use pour warm water in the jar, run for a few seconds and throw away the
water.
• The cleaning of the mixer grinder and jars are very necessary for maintaining
smooth operation of the mixer grinder and proper hygiene.
• After you have used the mixer grinder, use warm water to remove the smell of the
material from the jars and then rinse under running water.
• In order to clean the blades thoroughly, remove the blades by using the spatula to
loosen the screw by twisting the dome nut on the blade clockwise, while holding the
coupler from under the jar.

Terms and Conditions:
1.This warranty is void if:
a. The completely filled warranty card is not presented
at the time of servicing the product.
b. The product is not operated according to the
instructions given under the user manual.
C. Damages are caused by lightning, abnormal
voltage, water or other liquid intrusion, fire, flood,
accident, negligence or improper handling.
d. Product has been damaged due to installation,
repairs, alterations or modifications by unauthorized
service organizations or persons.
e. Product label specifying the model number, serial
number and production code has been removed
and altered.
f. Defects or parts requiring replacement due to
ordinary wear and tear, corrosion, rust or stains,
scratches, dents on the casing or paintwork of the
product.
g. Claims damaged and/or missing parts
(accessories) after 7 days from the original date of
goods received.
h. Defects or faults in product which have been used
for commercial/industrial purposes or which have
been rented/leased or have been otherwise subject
to non-household/non-domestic use.
2. Repairs or replacements will be carried out by
authorized service provider.
3. During the limited warranty period, Lifelong or its
authorized service provider will repair without charge
the defective unit inclusive of labor and parts and
restore the unit to its optimum working condition. All
defective parts used for the warranty repair should be
surrendered to Lifelong and/or its authorised servicer.
4. All expenses incurred in collecting the unit (s) or
part(s) thereof from authorised service provider as
will as any other expenses and incidentals will be
borne by the consumer.
5. Lifelong obligations are limited to the repair and
replacement of the defective product. Except as set
forth above, there are no other express or implied
warranty and all warrantied, conditions or other terms
implied by statute or common law (including any
warranty of satisfactory quality, merchantability or
fitness for a particular purpose) are excluded to the
fullest extent permitted by the lass.
6. Lifelong total liability for damages relating to or arising
out of the purchase or use of the product regardless of
the type or cause of such damage of the form of
characterization of the claim asserted (e.g. contract or
tort) shall not exceed the original purchase price paid
for the product.
7. However in no event shall Lifelong and Lifelong
authorized distributors be liable for any punitive, special
incidental, indirect or consequential losses or damages
whatsoever (including without limitation, damages for
the loss of revenue, business, profits, goodwill, or
contracts, business interruptions, loss of business
information or any other pecuniary loss.) Whether or
not Lifelong has been advised of the possibility of such
damages.These limitations shall apply not with
standing the failure of the essential purpose of any
limited warranty. This limited warranty does not affect
consumer's statutory rights under the law.
8. No carrier, dealer or employee is thereof authorized to
make modifications to this warranty and you should not
reply on any such representation. Lifelong reserves the
right to amend the terms and conditions if necessary.
Consumer Warranty Card
Dear Customer,
Thank you for choosing a Lifelong consumer product. All Lifelong Consumer products
are designed and manufactured to the highest standards to deliver high quality
performance, as well as easy installation and use. At Lifelong, we believe in
providing not only service, but adding value to your purchase. The warranty has
therefore been designed especially for you with your interest at heart.
Warranty Service
All Lifelong consumer products are covered against manufacturing defects from them
date of purchase.
Name of the product:
Model:
Warranty coverage: 1 year
Please note: Purchase receipt is necessary for warranty verification.
Customer Details
Name:
Address:
Home Number:
Office Number:
E-mail Address:
Product Details
Model No.:
Serial No.:
Purchase Date:
Invoice Number:
Online Site:
Please log onto to www.lifelongindiaonline.com and complete the online warranty form with your
personal and product details within 14 days.
Table of contents
Other lifelong Grinder manuals