
www.lifemaxuk.co.uk
Document Version No
Product Information
Be sure of good quality, bright light wherever you go with this compact
torch with clever fold out design. Boasting 100 lumens of light and a colour
rendering index of 85, this portable solution is ideal for anyone with low
vision.
How to use...
Whats included...?
Foldaway Portable Light, USB-C charging cable, Instruction Manual
www.lifemaxuk.co.uk
Document Version No
Before first use, your Foldaway Portable Light should be fully charged. Plug
one end of the USB-C cable into the light and the other end into a suitable
power source, such as a USB power adapter (sold separately).
Once the light is plugged into a suitable power source, a red LED light will
start to flash. When the light is fully charged the red LED will change from
flashing to a solid red light. A blue LED light will flash to indicate that your
light requires charging. If, whilst using your light, it dims on its own this also
indicates that the light requires charging.
To turn on your Light, press the On Button next to the LED indicator light. The
light will turn blue to show the lamp is powered on. The light is on with the
lowest setting. Press the On Button again to increase the brightness to the
medium level and again to increase the brightness to the highest level.
To convert your light from torch mode to lamp mode, gently pull the lamp
holder away from the body of the light and flip the lamp holder over. The light
can then be placed on a desk or flat surface and used as a lamp. To convert
the light back to torch mode, simply reverse this process.
The light can also be used to charge your mobile device. Simply plug your
mobile device, using your existing device charging cable, into the USB-A
port on the light. Your mobile device should immediately start to charge.
How to look after...
Do not use or store your light in direct sunlight. The light should be stored
in at temperature no lower than 10oC and no higher than 50oC with relative
humidity less that 55%. Do not get your light wet or submerge it in water. Do
not drop you light, it may stop working. Do not attempt to disassemble or
service your light, doing so will void its warranty. Keep away from children.
Only use correctly rated power sources to charge the light. If the light
becomes hot or appears to be malfunctioning, cease using the product
immediately.
Lamp Holder
USB-A Output
USB-C Input
On Button
TORCH MODE LAMP MODE
220423082022_IM_V4.indd 3-4220423082022_IM_V4.indd 3-4 31/08/2022 08:16:1031/08/2022 08:16:10