LifeSource UA-774 Manual

Trilingual Instruction Guide – MODEL UA-774
English • Français • Español
DUAL MEMORY
Blood Pressure Monitor

THIS MONITOR IS CLINICALLY VALIDATED
✓
This LifeSource®blood pressure monitor has undergone and passed a Clinical
Validation study to determine the performance and accuracy. This monitor is
clinically validated according to the British Hypertension Society (BHS) stan-
dard. The BHS is the most prestigious international blood pressure organiza-
tion. The published study was performed by a reviewing committee consist-
ing of physicians and/or nurses. Among blood pressure manufacturers, A&D
Medical is proud to have the highest number of Clinically Validated monitors
with a positive recommendation from professionals that are available to
consumers.
The Canadian Hypertension Society recognizes the accuracy of this blood
pressure monitor.

Please read this important information before using your monitor.
☞
Please remember that only a medical practitioner is qualified to inter-
pret your blood pressure measurements. Use of this device should not
replace regular medical examinations.
☞
Have your physician review your procedure for using this device. He
or she will want to verify blood pressure measurements before pre-
scribing or adjusting medications.
☞
Consult your physician if you have any doubt about your readings.
Should a mechanical problem occur, contact A&D Medical.
☞
Do not attempt to service, calibrate, or repair this monitor.
☞
Because your UA-774 monitor contains delicate, high-precision parts,
avoid exposing it to extremes in temperature or humidity or to direct
sunlight, shock and dust. A&D Medical guarantees the accuracy of
this monitor only when it is stored and used within the temperature
and humidity ranges noted on page E-18.
☞
Clean the monitor and cuff with a dry, soft cloth or a cloth dampened
with water and a mild detergent. Never use alcohol, benzene, thinner
or other harsh chemicals to clean monitor or cuff.
☞
Remove and replace batteries if monitor is not used for more than
six months. Alkaline batteries recommended.
PRECAUTIONS
The UA-774 is designed to be used at home, by those who are eighteen (18)
years and older, to monitor blood pressure (systolic and diastolic) and pulse rate.
IMPORTANT INFORMATION✓

Fast. Easy. Accurate.
Congratulations on purchasing a state-of-the-art LifeSource®
blood pressure monitor—one of the most technologically
advanced monitors available today. Designed for ease of use
and accuracy, this monitor will facilitate your daily blood
pressure regimen.
Physicians agree that daily self-monitoring of blood pressure is
an important step individuals can take to maintain cardiovas-
cular health and prevent the serious consequences associated
with undetected and untreated hypertension.
A&D Medical has been manufacturing high quality healthcare
products for over 20 years. We are committed to providing you
and your family with monitoring devices that provide the
utmost in accuracy and convenience.
LifeSource - Designed for Life.

WHAT DISPLAY SYMBOLS MEAN . . . . . . . . . . . . . . . . . . . E-2
MONITOR COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . E-3
HOW UA-774 WORKS . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4
SELECTING THE CORRECT CUFF SIZE . . . . . . . . . . . . . . . E-5
TAKING YOUR BLOOD PRESSURE . . . . . . . . . . . . . E- — E-8
WHAT IS AN IRREGULAR HEARTBEAT . . . . . . . . . . . . . . .E-9
ABOUT CUFF INFLATION METER . . . . . . . . . . . . . . . . . . .E-9
ABOUT AVERAGE READING . . . . . . . . . . . . . . . . . . . . . .E-10
ABOUT MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-10
USING THE MONITOR WITH AC ADAPTER . . . . . . . . . . .E-11
ABOUT BLOOD PRESSURE . . . . . . . . . . . . . . . . . E-12 — E-1
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . .E-17
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18
CONTACT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . E-19
FRENCH INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . F-1
SPANISH INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . S-1
TABLE OF CONTENTS
?
E-1

LifeSource Health Line (Toll-Free): 1-888-72 -99
E-2
WHAT DISPLAY SYMBOLS MEAN
?
?
Display
Symbol
Recommended
Action
Measurement is in progress,
remain as still as possible.
Take measurement again and
consult with your physician.
Replace all batteries with new
ones when the symbol blinks.
Alkaline batteries recommended.
Try the measurement again.
Remain very still during the
measurement.
Fasten the cuff correctly, and try
the measurement again.
Check for air leaks along the
tube and around the
air socket.
Refasten the cuff and retake
measurement.
Make sure tube is properly con-
nected to cuff and monitor.
Try the measurement again.
Remain very still during
the measurement.
Measurement is in progress,
remain as still as possible.
Condition/Cause
The symbol shown while meas-
urement is in progress. It blinks
while detecting the pulse.
An irregular heartbeat or body
movement may have occurred.
Refer to page E-9 for more infor-
mation on irregular heartbeats.
Previous measurement stored in
MEMORY.
The battery power indicator dur-
ing measurement.
The batteries are low when it
blinks.
Unstable blood pressure due to
excessive body movement.
The systolic and diastolic values
are within 10 mmHg of each
other.
The pressure value did not
increase during inflation.
The cuff is not fastened correctly.
There is an air leak in the cuff or
monitor.
The pulse is not detected correctly.
Cuff Inflation Meter
Battery Full
Battery Low
PULSE DISPLAY ERROR

In Canada - Auto Control Medical (Toll-Free): 1-800-4 1-0991
MONITOR COMPONENTS ?
E-3
?
SYSTOLIC PRESSURE START BUTTONS
AIR HOSE
CUFF
AIR CONNECTOR
PLUG
AIR SOCKET
BATTERY COVER
BATTERY COMPARTMENT
DIASTOLIC PRESSURE
CUFF INFLATION
METER
PULSE RATE

You must install 4 type AA (1.5 volt) batteries (alkaline batteries recommended),
or use the AC Adapter (see page E-14 for using the Monitor with AC Adapter)
and attach the cuff to the monitor before using it. To install batteries (or replace
them if the “Low Battery” symbol appears on display), proceed as follows:
1. Remove battery compartment cover by gently pushing down on arrow
and sliding cover forward.
2. Put in bottom row of batteries first. Place the
batteries in compartment with positive (+) and
negative (–) terminals matching those indicat-
ed in the compartment. Be sure batteries make
contact with compartment terminals.
3. Replace cover by sliding it into the compart-
ment and gently pressing into place.
NOTE: Rechargeable ba eries will no work
wi h his moni or.
LifeSource®blood pressure monitors are easy to use, accurate and digitally
display full measurement readouts. Our technology is based on the “oscillo-
metric method” – a noninvasive blood pressure determination. The term
“oscillation” refers to any measure of vibrations caused by the arterial pulse.
Our monitor examines the pulsatile pressure generated by the arterial wall as
it expands and contracts against the cuff with each heartbeat.
The cuff is inflated until the artery is fully blocked. The inflation speed is
maximized and the pressure level is optimized by the device. The monitor
takes measurements while the cuff is both inflating and deflating. This results
in a faster measurement providing greater comfort to the user.
Step 1
Step 2
Step 3
HOW UA-774 WORKS
?
BEFORE YOU START
LifeSource Health Line (Toll-Free): 1-888-72 -99
E-4 ?!

Using the correct cuff size is important for an accurate reading. A cuff that is
too large will produce a reading that is lower than the correct blood pressure;
a cuff that is too small will produce a reading that is higher than the correct
blood pressure. With your arm hanging at the side of your body, measure the
circumference of your upper arm at the midpoint between the shoulder and
elbow.
Cuff Size Indicator On The Cuff
Our cuff has an indicator which tells you whether you are using the correct
cuff size or not. Place the cuff on your arm (see Page E-7 to learn how to put
the cuff on correctly) and if the Index Mark points within the Proper Fit
Range, you are using the correct cuff size. If the Index points outside of the
Proper Fit Range, contact A&D Medical at 1-888-726-9966 (in Canada, call
Auto Control Medical at 1-800-461-0991) for more information on where to
obtain a cuff replacement.
ARM SIZE RECOMMENDED
CUFF SIZE
REPLACEMENT
CUFF MODEL#
6.3” - 9.4” (16-24cm)
9.4” - 14.2” (24-36cm)
14.2” - 17.7” (36-45cm)
Small Cuff
Medium Cuff
Large Cuff
UA-279
UA-280
UA-281
In Canada - Auto Control Medical (Toll-Free): 1-800-4 1-0991 E-5
!
SELECTING THE CORRECT CUFF SIZE
USE SMALL CUFF USE LARGE CUFFPROPER FIT RANGE
INDEX
INDEX
Ea

The UA-774 has several modes available to fit your blood pressure monitor-
ing needs.
Normal Measurement with Readings Stored in Memory
Press the START 1 or START 2 button. Your blood pressure is measured and
the reading is stored into memory. Each START button can store up to 30
readings in memory.
Recalling Previous Measurements
To recall previous measurements in memory, press and hold the START 1 or
START 2 button. Release the button after you see the first reading recalled
from memory. The previous measurements are displayed from most recent to
oldest.
Clearing Memory
Remove batteries to clear memory. Insert batteries again to resume blood
pressure measurements.
Taking a Measurement without Reading Stored in Memory
(Guest Mode)
This mode can be used when there is a third person taking measurements or
when storing readings in memory is not desired. Press both the START 1 and
START 2 buttons at the same time. A reading will be taken, but not stored
into memory.
TAKING YOUR BLOOD PRESSURE
LifeSource Health Line (Toll-Free): 1-888-72 -99
E-6

In Canada - Auto Control Medical (Toll-Free): 1-800-4 1-0991 E-7
TAKING YOUR BLOOD PRESSURE
Tips for Blood Pressure Monitoring:
☞
Relax for about 5 minutes before measurement.
☞
Do not smoke or ingest caffeine at least 30 minutes prior to
measurement.
☞
Remove constricting clothing and place cuff on bare arm.
☞
Unless your physician recommends otherwise, use left arm
to measure pressure.
☞
Do not talk during measurement.
☞
Do not cross legs and keep you feet flat on floor during measurement.
Now you are ready. Follow these simple steps:
1. Sit comfortably with your left arm resting on a flat surface so that the cen-
ter of your upper arm is at the same height as your heart.
2. Lay left arm on the table, palm up and thread
cuff end through metal loop, smooth side
against arm. Then position the tube off-center
toward the inner side of arm in line with the
little finger.
3. Pull the end of the cuff to tighten it, fold back
the extra material, and fasten securely. The cuff
should be snug but not too tight. You should
be able to insert two fingers between the cuff
and your arm.
IMPORTANT: Measure pressure a he same
ime each day.
4. Confirm that the index points within the proper fit range.
5. Designate yourself as User 1 or User 2. To keep track of your previous
blood pressure measurements accurately, User 1 should use the START 1
button and User 2 should use the START 2 button.
Cuff
Tube

TAKING YOUR BLOOD PRESSURE
LifeSource Health Line (Toll-Free): 1-888-72 -99
E-8
. Press the START 1 or START 2 button. Your average
blood pressure reading will appear with the number of
measurements stored in memory (i.e. A25 = total of 25
measurements stored in memory). As the cuff pressur-
izes, measurement will begin and the Cuff Inflation
Meter will show on the display screen. It is normal for
the cuff to feel very tight.
NOTE: If viewing measuremen s or s oring readings in memory are no
desired, press bo h he START 1 and START 2 bu ons a he same ime. A
reading will be aken, bu no s ored in o memory.
NOTE: If you wish o s op infla ion a any ime, press ei her START bu on
again.
NOTE: The maximum cuff pressure is se a 280 mmHg. If i reaches 280
mmHg, he au o exhaus will be riggered and cuff pressure will defla e o 0.
7. When the inflation is complete, the deflation
starts automatically and the ❤blinks, indi-
cating that the measurement is in progress.
Once the pulse is detected, the ❤ symbol
flashes with each pulse beat.
NOTE: If an appropria e pressure is no
ob ained, he device au oma ically s ar s o
infla e again.
8. When the measurement is complete, the systolic and diastolic pressure
readings and pulse rate are displayed and stored. See Page E-10 for more
details about the memory function. The cuff deflates and the monitor
automatically shuts off after 60 seconds, or you can turn it off by pressing
either START button.
9. Remove cuff and make a note of your blood pressure and pulse rate on
the chart provided, indicating date and time of measurement. Additional
logbook charts can be downloaded and printed for free at
www.LifeSourceOnline.com or in Canada, www.autocontrol.com.
We advise that you record the date and time after each measurement because
an accurate blood pressure history relies not on single or sporadic readings
but on a pattern over time.
NOTE: Allow a leas 5 minu es be ween measuremen s on he same
person.
SYSTOLIC
DIASTOLIC
PULSE

WHAT IS AN IRREGULAR HEARTBEAT
The UA-774 Blood Pressure Monitor provides a blood pressure and pulse
rate measurement even when an irregular heartbeat occurs. The Irregular
Heartbeat symbol will appear in the display window in the event an
Irregular Heartbeat has occured during measurement. An irregular heartbeat
is defined as a heartbeat that varies by 25% from the average of all heartbeat
intervals during the blood pressure measurement. It is important that you
relax, remain still and refrain from talking during measurements.
NOTE: We recommend con ac ing your physician if you see his
symbol frequen ly.
In Canada - Auto Control Medical (Toll-Free): 1-800-4 1-0991 E-9
The Cuff Inflation Meter is located on the left side of the display screen to tell
you when the blood pressure monitor is inflating and deflating the cuff. The
Cuff Inflation Meter moves up during inflation and moves down during
deflation.
Infla ion in Progress Infla ion Comple e Defla ion/Measuremen
in Progress
ABOUT CUFF INFLATION METER

LifeSource Health Line (Toll-Free): 1-888-72 -99
E-10
The memory function on the UA-774 blood pressure monitor
is designed for two people. For each START button, the moni-
tor can store up to 30 readings in memory. To keep track of
previous measurements accurately, we recommend that you
use the same START button each time you take a blood pres-
sure reading.
To recall previous measurements in memory, press and hold
the START 1 or START 2 button. Your average blood pressure
reading will appear with the number of measurements taken
flashing several times. Release the button after the display
switches to the memory index number (see illustration on
right). The previous measurements are displayed from most
recent to oldest. When viewing previous measurements, you
will see the "M" symbol appear on the upper left corner of this
display. You can stop measurements by pressing either START
button again.
NOTE: Memory will be los if ba eries become low or are removed.
ABOUT MEMORY
ABOUT AVERAGE READING
The UA-774 provides an average blood pressure reading based
on the total measurements stored in memory. When taking a
measurement, the average blood pressure reading will appear
and the number of measurements stored in memory will flash
several times before the cuff begins to inflate. The average
blood pressure reading will also appear briefly when you recall
the measurements stored in memory. Average pulse
rate readings are not provided by
this monitor.
NUMBER OF MEASUREMENTS STORED
IN MEMORY
AVERAGE

In Canada - Auto Control Medical (Toll-Free): 1-800-4 1-0991 E-11
USING THE MONITOR WITH AC ADAPTER
The UA-774 has an AC adapter jack to allow you to supply power from an
outlet in your home. We recommend you use only the LifeSource AC adapter
to avoid potential damage to the monitor.
Connecting the AC adapter to the monitor:
1. Gently insert the AC adapter plug into a 120V AC outlet.
2. Connect the AC adapter plug into the jack on the right side
of the monitor.
Disconnecting the AC adapter from the monitor:
1. Turn the unit off by pressing the START button.
2. Disconnect the plug from the jack of the monitor quickly.
3. Gently remove the AC adapter from the outlet.
NOTE: If moni or has ba eries and an AC adap er connec ed, he measure-
men s s ored in memory will be los if AC adap er is unplugged from he
wall firs . To ensure ha measuremen s remain in memory, make sure he
uni is off and ha he jack plugged in o he moni or is removed quickly
before unplugging adap er from he wall.
Jack
Plug
AC Adapter

LifeSource Health Line (Toll-Free): 1-888-72 -99
E-12
What Is Blood Pressure?
Blood pressure is the force exerted by blood against the walls of the arteries.
Systolic pressure occurs when the heart contracts; diastolic pressure occurs
when the heart expands. Blood pressure is measured in millimeters of mercury
(mmHg).
What Affects Blood Pressure?
Blood pressure is affected by many factors: age, weight, time of day, activity
level, climate, altitude and season. Certain activities can significantly alter
one’s blood pressure. Walking can raise systolic pressure by 12 mmHg and
diastolic pressure by 5.5 mmHg. Sleeping can decrease systolic blood pres-
sure by as much as 10 mmHg. Taking your blood pressure repeatedly with-
out waiting an interval of 5 minutes between readings, or without raising
your arm to allow blood to flow back to the heart, can also affect it.
In addition to these factors, beverages containing caffeine or alcohol, certain
medications, emotional stress and even tight-fitting clothes can make a difference
in the readings.
What Causes Variations In Blood Pressure?
An individual’s blood pressure varies greatly from day to day and season to
season. For hypersensitive individuals, these variations are even more pro-
nounced. Normally, blood pressure rises during work or play and falls to its
lowest levels during sleep.
ABOUT BLOOD PRESSURE

In Canada - Auto Control Medical (Toll-Free): 1-800-4 1-0991 E-13
ABOUT BLOOD PRESSURE
Assessing High Blood Pressure for Adults
The following standards for assessing high blood pressure (without regard to
age or gender) have been established as a guideline. Please note that other
risk factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into con-
sideration and may affect these figures. Consult with your physician for an
accurate assessment.
JNC7 Classification Table – for adults within the U.S.
BP Classification Systolic (mmHg) Diastolic (mmHg)
Normal less than 120 and less than 80
Prehypertension 120-139 or 80-89
Stage 1 Hypertension 140-159 or 90-99
Stage 2 Hypertension 160 or 100
SOURCE: The Seven h Repor of he Join Na ional Commi ee on
Preven ion, Evalua ion and Trea men of High Blood Pressure for Adul s.
Na ional Hear , Lung and Blood Ins i u e - May 2003.
WHO Classification Table – for adults outside of the
U.S. (e.g. Canada, Mexico)
BP Classification Systolic (mmHg) Diastolic (mmHg)
Optimal less than 120 and less than 80
Normal less than 130 or less than 85
High-Normal 130-139 or 85-89
Stage 1 Hypertension 140-159 or 90-99
Stage 2 Hypertension 160-179 or 100-109
Stage 3 Hypertension 180 or 110
SOURCE: S andards o assess high blood pressure, wi hou regard o age
or gender, have been es ablished by he World Heal h Organiza ion (WHO).
greater than
or equal to greater than
or equal to
greater than
or equal to
greater than
or equal to

ABOUT BLOOD PRESSURE
LifeSource Health Line (Toll-Free): 1-888-72 -99
E-14
What Is Hypertension?
Hypertension (high blood pressure) is the diagnosis given when readings
consistently rise above normal. It is well known that hypertension can lead to
stroke, heart attack or other illness if left untreated. Referred to as a “silent
killer” because it does not always produce symptoms that alert you to the
problem, hypertension is treatable when diagnosed early.
Can Hypertension Be Controlled?
In many individuals, hypertension can be controlled by altering lifestyle and-
minimizing stress, and by appropriate medication prescribed and monitored
by your doctor. The American Heart Association recommends the following
lifestyle suggestions to prevent or control hypertension:
Don’t smoke. Have regular physical
Reduce salt and fat intake. checkups.
Maintain proper weight. Monitor your blood
Exercise routinely. pressure at periodic intervals.
Why Measure Blood Pressure at Home?
It is now well known that, for many individuals, blood pressure readings
taken in a doctor’s office or hospital setting might be elevated as a result of
apprehension and anxiety. This response is commonly called “white coat
hypertension.” In any case, self-measurement at home supplements your doc-
tor’s readings and provides a more accurate, complete blood pressure history.
In addition, clinical studies have shown that the detection and treatment of
hypertension is improved when patients both consult their physicians and
monitor their own blood pressureat home.

In Canada - Auto Control Medical (Toll-Free): 1-800-4 1-0991 E-15
ABOUT BLOOD PRESSURE
Answers to Why Your Readings Are Different
Between Home and at the Doctor’s Office
Why are my readings different between home and at a doctor’s office?
Your blood pressure readings taken in a doctor’s office or hospital setting may
be elevated as a result of apprehension and anxiety. This response is known
as white coat hypertension.
When I bring my monitor to a doctor’s office, why do I get a different
measurement from my monitor to that taken by a doctor or nurse?
The healthcare professional may be using a different sized cuff. The size of
the bladder inside the cuff is critical for the accuracy of the measurement.
This may give you a different reading. A cuff too large will produce a reading
that is lower than the correct blood pressure; a cuff that is too small will pro-
duce a reading that is higher than the correct blood pressure. There may also
be other factors that can cause the difference in measurements.
Keys to Successful Monitoring:
Blood pressure fluctuates throughout the day. We recommend that you are
consistent in your daily measurement routine:
• Measure at the same time every day.
• Sit in the same chair/position.
• Do not cross legs and keep your feet flat on the floor.
• Relax for 5 minutes before measurement.
• Use the correct cuff size to get an accurate reading.
• Sit still during measurement – no talking, eating or sudden
movements.
• Record your measurement in a logbook.

ABOUT BLOOD PRESSURE
LifeSource Health Line (Toll-Free): 1-888-72 -99
E-16
Establishing Baseline Measurements
The most important method to get an accurate blood pressure measurement
is consistency. To get the most benefit out of your monitor, it is important to
establish a “baseline measurement.” This helps build a foundation of meas-
urements that you can use to compare against future readings. To build this
baseline measurement, devote two weeks for consistent blood pressure moni-
toring. This involves doing everything the same way when you measure (e.g.
measuring during the same time of day, in the same location, sitting in the
same chair, using the same cuff, etc.). Once you establish your baseline meas-
urement, you can start evaluating if your measurement has been affected
based on things lifestyle changes or medication treatment.
How Do I Record My Blood Pressure?
Blood pressure readings are typically recorded with the systolic pressure writ-
ten first, followed by a slash mark and the diastolic pressure. For example,
120 mmHg systolic and 80 mmHg diastolic measurements are written as
120/80. Pulse is simply written with the letter “P” followed by the pulse
rate—P 72, for example. Please see the back of the manual for the blood
pressure tracking record.
Customer Support Tools Online
Additional tools are available on www.LifeSourceOnline.com (in Canada -
www.autocontrol.com) to help you get the most out of your blood pressure
monitoring. These include:
• Large Print Instruction Manuals
• Animated Operating Instructions for select models
• Additional Logbook Sheets