
3
SET UP
Seat Assembly
General Safety Precautions
Remove safety frame from packaging and check for cracks and damages.
If you see any, or suspect a fault, do not assemble the product; contact
your supplier immediately.
Mount the plate [A] on the toilet bowl using the existing screws; unscrew
the toilet seat, place the plate [A] and screw them back together.
Slide both tubes [C] into the frame [A] by depressing push buttons and
sliding them into the frame. Beware risk of injury! Make sure that push
buttons “snap” correctly through holes and that the frame is stable.
Slide both tubes [B] into the tubes [C], small stickers with the (B) letter
must be positionned face to face. Screw both elements on each side
together using the knurled screw and nut.
Position the armrests on the toilet bowl and fold down the lid to stabilize
the toilet safety frame. Check the stability before using the safety frame.
› Always be sure that the seat is correctly and securely in place before using.
› Physically challenged users should be supervised or assisted whenever using this product.
› This product is designed for use with the most common types of commodes. It will not fit all commode types; be sure that the unit is
correctly installed, fits properly and is stable before use.
› If you have a style of commode that this product will not fit properly, it is recommended that you discontinue usage.
› Check for secure fit routinely before using product. User’s weight should be centered over toilet seat, not too forward or too far to one
side, as unit may tip.
1
3
4
5
2
Your Lifestyle Mobility Aids product is warranted to be free of defects in materials and workmanship for the
lifetime of the original consumer purchaser.
This device was built to exacting standards and carefully inspected prior to shipment.
This Lifetime Limited Warranty is an expression of our confidence in the materials and workmanship of our
products and our assurance to the consumer of years of dependable service.
In the event of a defect covered by this warranty, we will, at our option, repair or replace the device.
This warranty does not cover device failure due to owner misuse or negligence, or normal wear and tear.
The warranty does not extend to non-durable components, such as rubber accessories, casters, and grips,
which are subject to normal wear and need periodic replacement.
LIFETIME LIMITED WARRANTY
› Use a non-abrasive detergent or household cleaner with warm water.
› Rinse with warm water and wipe dry.
› DO NOT USE AN ABRASIVE CLEANER OR CLOTH with this product, as damage may ensue.
CLEANING
The Toilet Safety Frame has to be cleaned regularly with a mild cleaning agent and a soft cloth.
SAFETY & MAINTENANCE
C
C
B
B
D
A
D