Light Headed 20343 User manual

“Montgomery” LightHeaded™ Bed
www.LightHeadedBeds.com
Model #20343 Twin size, Espresso
Model #20345 Twin size, Satin White
07-23-2015
1168364
Parts List
Part Description Quantity
A
5/8” long machine screw (Part# 80000647) 8
B
3/4” long machine screw (Part# 80000648) 6
C
1-1/4” long machine screw (Part# 80000649) 8
D
Wood screw (Part# 80000650) 28
EAllen wrench (Part# 80000651) 1
FHeadboard Caprail (Part# 80000652 Espresso, Part#80000653 Satin White) 1
G
Headboard Center Panel (Part# 80000654, Espresso; Part# 80000655, Satin
White) ships with LightHeaded™ lighting component kit already installed. 1
H
Right headboard leg (Part# 80000656 Espresso; Part# 80000657 Satin White) 1
ILeft headboard leg (Part# 80000658 Espresso; Part# 80000659 Satin White) 1
JFootboard (Part# 80000660 Espresso; Part# 80000661 Satin White) 1
K
Split side rail part 1 (Part# 80000662 Espresso; Part# 80000662 Satin White) 2
LSplit side rail part 2 (Part# 80000664 Espresso; Part# 80000665 Satin White) 2
M
Side rail support legs (Part# 800000666 Espresso, Part#80000667 Satin White) 2
N
Roll-out slats (12 pieces of wood connected with nylon straps) (Part#
800000679) 1
O
LightHeaded™ TechBox (Contains remote control, power cord, User Guide, and
most importantly your $20 coupon code for LightHeaded™ Beds.com) (Part#
80000152)
1
Before you begin:
•Consider enlisting a family member or friend to help; it will make assembly easier,
faster, and more fun.
•Layout all of the parts listed below.
•Save all packing materials until assembly is complete to avoid accidentally
discarding smaller parts or hardware.
•You will need a Phillips head screw driver (not included)
Page 1

“Montgomery” LightHeaded™ Bed
www.LightHeadedBeds.com
Model #20343 Twin size, Espresso
Model #20345 Twin size, Satin White
07-23-2015
1168364
Step 1
1. From the top of your LightHeaded™ headboard remove the protective packing
material and discard.
2. The LightHeaded™ Beds patented energy efficient LED Light Guided Panel has been
pre-installed in your headboard with the acrylic cover and starter HeadLight Image
already in place.
3. Please refer to your LightHeaded™ Lighting User Guide in the TechBox (O) for
information on how to power up your light, insert images, and trouble shoot. Please
be sure to look for your remote control and $20 coupon in the TechBox.
Step 2
1. Carefully lay the headboard center panel (G) face down on
a soft surface (like a rug or carpet).
2. Align 3 threaded inserts in left and right headboard legs
(H,I) with holes in center panel.
3. From the back of the headboard center panel (G), use
allen wrench (E) to tighten machine screws (B) through
holes (3 per side) in headboard center panel into threaded
inserts in headboard legs (H, I).
Step 3
G
F
1. Secure headboard caprail (F) to headboard center panel
(G) with 4 wood screws (D) using a Phillips head screw
driver (not included).
B
E
G
F
D
F
D
Page 2

“Montgomery” LightHeaded™ Bed
www.LightHeadedBeds.com
Model #20343 Twin size, Espresso
Model #20345 Twin size, Satin White
07-23-2015
1168364
Step 4
Step 5
Step 6
1. Match the ends of the split side rails (K &L ) as
illustrated by lining up the inside mattress
support cleat. Each assembled side rail will have
a metal mounting bracket on each end.
2. Connect the split side rails by screwing from the
outside 4 long machine screws (C) through the
side rail support leg (M) and into the threaded
inserts on the side rail. Repeat this step for the
left and right side rails.
1. With the wood cleat on the inside and at the
bottom edge, using the allen wrench included
(E) to connect the short machine screws (A)
through the preassembled metal plate on the
ends of the side rails to corresponding threaded
holes in the metal plate on the legs (I,H) of your
newly assembled headboard.
2. Repeat this step to connect the side rails to the
footboard (J).
3. After both the headboard and footboard have
been connected be sure to go back and fully
tighten the short machine screws (A).
1. Stretch out the roll-out mattress slats on the inside
wood support cleats so that they extend from
headboard to footboard. Use the 24 wood screws (D)
to secure the slats to the inside wood cleat.
K
K
L
L
M
C
J
D
N
A
A
Page 3

“Montgomery” LightHeaded™ Bed
www.LightHeadedBeds.com
Model #20343 Twin size, Espresso
Model #20345 Twin size, Satin White
07-23-2015
1168364 Page 4
1. Your LightHeaded™ Bed is designed with built in storage
for extra HeadLight Images on the back of your headboard.
You can slide the images in from either the left or right
side. A long groove in the middle provides finger access to
help you to slide images in and out easily. Please use this
patented specially designed area to safely store up to 25
interchangeable LightHeaded™ graphic images and keep
them clean and organized.
Your LightHeaded™ Bed can be turned On/Off
using the remote control included in your
TechBox as well as on the bed itself. On the
back of your LightHeaded™ headboard,
centered just below the top, is an On/Off
switch which can be used to toggle the light
component on or off.
HeadLight Image Storage
Changing Active HeadLight Image
On/Off Switch
1. Easily slide in and out the active HeadLight Image from the
top of your headboard behind the caprail. For more
information on how to use your LightHeaded™ Bed please
refer to the Lighting User Guide in your TechBox.

“Montgomery” LightHeaded™ Bed
www.LightHeadedBeds.com
Model #20343 Twin size, Espresso
Model #20345 Twin size, Satin White
07-23-2015
1168364 Page 5
How to Obtain Warranty Service
Please complete and return the product registration card. If you
have questions regarding this warranty or would like to obtain
warranty service, please call [phone] or e-mail
[email protected].
HeadLight Images
LightHeaded™ Beds are designed and tested to work exclusively
with LightHeaded™ Beds printed and supplied “HeadLight
Images”. HeadLight Images can only be ordered from
www.LightHeadedBeds.com This product is not intended for use
with any other image inserts. Failure to use LightHeaded™ Beds
supplied HeadLight Images exclusively will void warranty.
One Year Limited Warranty
LightHeaded™ Beds warrants that for a period of one year from the
date of purchase, this product will be free from defects in material and
workmanship. LightHeaded™ Beds, at its option, will repair or replace
the product or any component of the product found to be defective
during the warranty period. Replacement will be made with a new or
remanufactured product or component. If the product is no longer
available, replacement may be made with a similar product of equal or
greater value. This is your exclusive warranty.
This warranty is valid for the original retail purchaser from the date of
initial retail purchase and is not transferable. Keep the original sales
receipt. Proof of purchase is required for warranty service.
LightHeaded™ Beds dealers, service centers, or retail stores selling
LightHeaded™ Beds products do not have the right to alter, modify, or
in any way change the terms and conditions of this warranty.
This warranty does not cover normal wear and tear of parts or damage
resulting from any of the following: negligent use or misuse of the
product, use on improper voltage or current, use contrary to the
operating instructions, electronics disassembly, repair or alteration by
anyone other than LightHeaded™ Beds authorized service
representatives..
What Are the Limits on LightHeaded™ Beds Liability?
LightHeaded™ Beds shall not be liable for any incidental or
consequential damages caused by the breach of any express, implied,
or statutory warranty or condition. Except to the extent prohibited by
applicable law, any implied warranty or condition of merchantability or
fitness for a particular purpose is limited to the duration of the above
warranty. LightHeaded™ Beds disclaims all other warranties, conditions
or representations, express, implied, statutory or otherwise.
LightHeaded™ Beds shall not be liable for any damages of any kind
resulting from the purchase, use or misuse of, or inability to use the
product including incidental, contract, fundamental or otherwise, or for
any claim brought against purchaser by any other party.
Got Questions?
Our friendly LightHeaded™ Customer
Service team can help you by phone
[phone] or e-mail
[email protected] . Assembly
and how to use videos are online at
You-Tube and at LightHeadedBeds.com