Light O Rama SASQUATCH MEGATREE User manual

Assembly
instructions

Sasquatch MegaTree Assembly Instructions
Tools Need
3/16" Allen key
OR
17mm
3/4”
1/2”
7/16”
U.S. Patent Pending

2’ X2’
1 1/4”
5’ 6”
Sasquatch Base Assembly
Sasquatch Modular Pole x 4
Insert each pole into the base with the
holes facing to the side x 3
1/2-13 x 1 1/4
4 threaded holes
in base.
3/4”

9
Sasquatch Modular Main Pole Assembly
Sasquatch Modular
Pole x 4
Modular Pole
Inner Coupler x 3
6 threaded 5/16”-18 holes
Tapered holes
on both sides
x 12
5/16”-18 X 3/4”
3/16”
Allen key
Safety
stop
bolt
Winch line should
feed the out top
Bolt with washer x 3
1”
Mount the winch to
the top of the rst pole.
Bolt with
washer x 3
5/16”-18
5/16”-18 X 1”
1/2”

Sasquatch Toppers
32 Hole Sasquatch Topper
Center sleeve slides
on 2”x2” square pole.
4 small holes
allow for guy wire
anchoring. (optional)

Threaded holes x 7
M8
Star topper mount x 1
5/16”-18 bolt
Sasquatch Topper Assembly
Winch eyelet x 1
M10 bolt
Carabiners
x 32 / x 48 / x 64
Attach 1 per hole
M10 nut x 1
5/16”-18 nut x 1
4” Center
1/2”
17mm
3/16" Allen key

Slide Pulley cap over top of pole
and feed winch line over the top.
Feed winch line
through rectangular
hole in the topper.
Rotate up when assembled

Attach the winch clip
to the winch eyelet on
the topper.
*Shown without
star topper or
carabiners
to simplify
illustration.
Once tilted up, attach the last leg.
1 1/4”
1 1/4”
x 2
1/2-13 x 1 1/4
3/4”

6pcs
8’
Sasquatch Hoop Assembly
2 bolts per piece
5/16”-18 x 3/4
x 12 bolts
2 threaded 5/16”-18 holes
Square Tube Option Round Tube Option
2 threaded 5/16”-18 holes
3/16" Allen key

1/2”
7/16”
Square-Neck
Elevator Bolts
x8
Flange Locknuts
5/16 -18
Flange Locknuts
1/4 -20
x8
1/4-20 x 1 3/4”
x8
Hoop Mounting Option A
Stand Alone Base Hoop Mount Set Sku: SMTSAM
Disconnect 1 hoop seam to allow the hoop to wrap around
the center pole and place on top of the base feet.
On each of the four base feet, attach a base hoop mount.
Attach the hoop to the base hoop mount.
Base Hoop Mount