Lightcloud LCBLUEREMOTE/W User manual

1(844) LIGHTCLOUD
1(844) 544-4825
WE’RE HERE TO HELP:
Welcome
Remote Controller
LCBLUEREMOTE/W
Lightcloud

The Lightcloud Blue Remote lets you control your
Lightcloud Blue-enabled lighting from anywhere onsite.
Manage on/off switching, dimming, color temperature
tuning, and set two programmable buttons for custom
scenes. No Gateway or Hub required. Can be mounted to
a single-gang wall box or directly to a wall.
Dimming
Color Tuning
Decorator Wall Plate
Product Features & Specifications
Wireless Control&
Configuration
Catalog Number:
LCBLUEREMOTE/W
Specifications:
Voltage: 3V
Amps: 10mA
Range: 70ft
Battery type: CR2032
Battery life : 2 years
Warranty: 2 year limited

What’s in the box
1 wireless remote with battery
1 faceplate bracket
1 installation guide
4 mounting screws
1 faceplate
1 backplate
Quick Setup
2
3
4
Download the Lightcloud app from the Apple App
Store or Google Play store.
Launch the App and create an account.
Tap the "add device" icon in the app to
start connecting devices.
Confirm your device is connected and powered on.
1

Function
Installing or changing battery
5
1
Follow the remaining steps in the app. Create areas,
groups, and scenes to organize and control your
devices.
You're all set!
Remote button functions:
6
Brighten
Factory
Restore
Dim
On / Off
Customized Scene
Remove the cover
on the back
Lightcloud
Light Color Temperature
(CCT) Change

Wall-mounting
2Install CR2032 battery
in the compartment
positive (+) side up
3Replace back cover
Screw backplate
to the wall
Remove the spacer
Snap the faceplate
onto backplate
Attach remote to the faceplate
1
3
2
4

All configuration of Lightcloud Blue products may be
performed using the Lightcloud Blue app.
Configuration
Reset
Functionality
2
1
Method 1: Press and hold the “RESET” button for 3s. A red
indicator light will appear in the top left corner of the face of the
remote when reset is complete.
Method 2: Press and hold the “ON/OFF” and “Customized Scene”
(..) buttons together for 5s. A red indicator light will appear in the
top left corner of the face of the remote when reset is complete.

FCC Information:
Note: This device has been tested and found to comply with the limits for Class B
digital devices pursuant to Part 15 Subpart B, of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try
and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an ecperienced radio/TV technician for help.
To comply with the FCC’s RF ecposure limits for general population / uncontrolled
exposure, this transmitter must be installed to provide a separation distance of at least
20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter. The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
CAUTION: Changes or modifications to this equipment not expressly approved by RAB
Lighting may void the user’s authority to operate this equipment.
This device and its antenna(s) must not be co-located or operation in conjunction
with any other antenna or transmitter. Radiation Exposure Statement The device has
been evaluated to meet general RF exposure requirement. in portable exposure
condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1. This device may not cause harmful interference, and 2.
This device must accept any interference received, including interference that may
cause undesired operation.

Lightcloud
Lightcloud Blue is a wireless lighting control system
that allows you to control RAB's various compatible
devices without requiring a separate gateway or
hub device. Connect directly to lights using your
mobile device.
Learn more at www.lightcloud.com
2024