LIGHTEL Technologies DI-1000-WIFI User manual

1. Status Light
Red –Turned on, not ready
Blue (flashing) –WiFi ready
Blue (steady) –WiFi in use
2. DI-1000 connection port (USB port)
Note: For best performance, the DI-1000 should be
connected after the Status Light is flashing Blue.
3. Belt Clip
4. Charging Port (DC Power Micro USB Port)
Note: To charge use a Micro USB cable with mobile
phone charger, car charger or DC adapter (5V 1A).
5. Charging Indicator Light
6. Belt Clip Release
7. 3-Position Switch
ⱷ–Off
C –Charge
R –Ready (On)
8. Battery Indicator Level Button
9. Battery Indicator Lights (1 to 4)
10. Reset Button
1
2
3
4
5
6
7
8
9
10
DI-1000-WIFI
User
Guide

Downloading Lightel App
Android
Go to Google Play and type LT-WiFi_Inspector into the search bar. Download the ConnectorView App to
your Android device and install.
For detailed instructions on how to install Apps from Google Play please see
https://support.google.com/googleplay/answer/113410?hl=en
iOS
Go to the Apple Store and type LT-CV-WIFI into the search bar. Install the ConnectorView App to your
Apple device.
Windows PC
Go to the Lightel website Support page Download Software link to the Download page.
http://www.lightel.com/download
Download and install the newest version of ConnectorView Software. The download will include a full
User's Manual.
Driver installation is necessary before using a direct USB connection. Please make sure to follow the
installation instructions in the Manual for your specific Windows operating system when installing a
driver. Previously installed Lightel provided drivers may be used with this software.
A driver is not necessary if only using the WiFi connection.
The Windows screens differ from those shown elsewhere in this manual for Android and iOS.

Connecting to the DI-1000-WIFI
You can check the charge level by pressing the Battery Charge Indicator Button
under the 3-position switch on the side of the WiFi adapter. Four blue lights
indicate a full charge.
Once you have installed the correct Lightel app for your device, you can use the DI-1000-WIFI for
viewing and saving endface images with the DI-1000 and your tablet or smart phone.
The blue light will remain continuously on, while the DI-1000 remains connected. Open your Wi-Fi
Manager or Network Connections screen on your device. You may need to refresh your connections list.
Each DI-1000-WIFI unit has a unique SSID. The address for your adapter can be found on the label on the
back of the adapter. Find the address "LT_WiFi_Inspector_xxxxxx" on your WiFi list and connect.
You can now use the Lightel ConnectorView App you have previously downloaded to your device to
inspect and capture connector images.
Use the included micro-B
USB cable to charge the
DI-1000-WIFI from a USB
output source. Set the
3-Position Switch to "C"
(Charge).
The light under the
Charging Port will
be blue while the
unit charges.
Set the 3-Position Switch
to "R" (Ready).
The Status light will
be red. When it
flashes blue (after
about 30 seconds),
plug in the DI-1000
to the USB port at
the top of the
adapter.

Android and iOS
The left side of the screen shows the
connector image in real time.
The right side provides controls.
Touch [Ring On] to display the IEC
standard cleaning zones on a Frozen
image.
Touch [Ring Off] to remove this
overlay.
[SM/MM] changes the ring overlay
from single-mode to multimode. The
current setting is shown on the button.
Single-mode is the default setting.

[Options] opens a screen for various
settings. Current settings are shown in
green..
You can select what file format is used
for saved images.
Assign a filename for your saved
images and select a folder for the
saved images.
Resetting the number does not change the File Name, so existing files may be overwritten.
Touch a button to open a dialog box
and change the setting
[Freeze/Live] toggles between a
frozen and a live image. The current
status is shown on the button.

[Save] saves the current displayed
image in your selected folder. You can
also use the Capture Button on your
DI-1000 to save the image.
For iOS a camera shutter will sound
when the image is saved.
[Image Explore] opens your currently
selected folder to enable you to view
your saved image files. Touch the
image to display the individual photo.
2210 Lind Ave. SW, Suite 100
Renton WA 98057 USA
425-277-8000
www.lightel.com
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.