Lightolier ALTER LOUVER QVS1GPFLV User manual

ALTER LOUVER
1’ X 4’ RECESSED DIRECT/INDIRECT FLUORESCENT
2-T8 OR 2-T5, 5 1/2” DEEP
MICROPERFORATED MESH WHITE LAMP SHIELD
MICROPERFORATED MESH WHITE LOUVER BLADES
Efficiency 59.8%. (T8)
Flat blade louver with lens overlay
and perforated curved side blades.
Seamless welded form: curved top and side
reflectors are formed together without any
gaps or visual barriers.
No visible welding, screws, latches, springs,
hooks, rivets or plastic supports.
95% reflective Alter soft white paint finish.
5-1/2” deep, one-piece body for easy
installation.
Choice of white microperforated blade,
white solid blade or grey solid blade.
Easy access to ballast through lamp
compartment.
Fits standard T-grid, exposed slot T-grid
ceilings and drywall ceilings.
Fully recessed luminaire and lamp
compartment.
Optional hold-down clips.
Luminaire can be row mounted.
MOUNTING METHODS/FEATURES DIMENSIONS
FIXTURE TYPE
JOB INFORMATION:
VOLTS
L20-26
QVS1GPFLV
Suited to standard exposed Slot T-grid
ceilings
Microperforated mesh white lamp shields
grey solid louver
Microperforated mesh white lamp shields
white mesh louver
Ceiling compatibility
Suited to standard exposed T-grid ceilings
Microperforated mesh white lamp shields
white solid louver
Genlyte Thomas Company

ORDERING INFORMATION Explanation of Catalogue Number Example: QVS1GPFLV232120SB
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed
20 gauge cold rolled steel. Reflectors - 95% reflectance baked white
acrylic matte paint finish. Soft white acrylic film on inside of lamp shield
conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte high reflectance paint finish. Louver - flat blade louver with soft
white acrylic overlay.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast. If K.Os
are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by CSA, UL
QVS1GPFLV
QVS
FAMILY
QVS: Quality
Visual Static
1
LUMINAIRE
WIDTH
24"
G
CEILING
TYPE
G=Grid
PF
LAMP
SHIELD
PF=Microperforated
mesh
LAMP
QUANTITY
2
LAMP/FIXTURE
LENGTH
32= 32W T8
28 = 28W T5
54 = 54WT5
120
VOLTAGE
120,277
347,UNV(120/277V)
SB
OPTIONS
F = Internal Fusing
(consult factory)
N= Emergency Lighting
System (for U.S.)
O =Emergency Lighting
System (for Canada)
R =Radio Interface
Filter
BALLAST
PI: T5 Elect. Instant S.
PG: T5 Elect. Program S.
SO: T8 Elect.
PS: T8 PowerSpec HDF Dimming †
DA: iGEN DALI †
SHIELD DETAILING
LG= Grey solid flat blade louver
LV= White perforated flat blade louver
LW= White solid flat blade louver
We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.
ALTER LOUVER
1’ X 4’ RECESSED DIRECT/INDIRECT FLUORESCENT
LV 2 32
LPB : Number of lamps per ballast † Not available in 347V.
Photometry Model No. : QVS1GPFLV232120SO
Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 - Tel. [phone]
C.F.I. Division of Canlyte, Inc.
525 Education Road, Cornwall, Ontario
Canada K6H 6C7 - [phone]