Furniture of America CM7277EK User manual

MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
VERSION # 20-03-16
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
Wrench
(Included)
1 / 9
CM7277EK/CK

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

#1 1pc
#A 4pcs
H/Board Leg Rail
#2 1pc
Footboard
#3 1pc
Bolt Ø5/16" x 1-3/4"
#B 4pcs
Lock washer
Ø5/16"
#E 8pcs
Threaded Stud
Ø5/16"x3-1/2"
#4 2pcs
Side Rail
Slat
#5 4pcs
Support Leg 235*30*30mm
#6 8pcs
#C 4pcs
Flat washer
Ø5/16"
#F 8pcs
Hex Nut
Ø5/16"
#G 1pc
Wrench
Ø12mm
#H 8pcs
Screw
#4 x 32mm
#D 1pc
Allen wrench 5mm
Headboard
5 / 9
CM7277EK/CK
E.KING BED
CAL.KING BED

#A 4pcs
#B 4pcs
#D 1pc
#E 8pcs
#C 4pcs
#F 8pcs
#G 1pc
#H 8pcs
#1
Headboard
H/B Leg Rail
Footboard
Side Rail
Slat
Support Leg
#2
#3
#4
#5
#6
6 / 9
CM7277EK/CK-R
CM7277EK/CK-HB
CM7277EK/CK-FB
Carton Disignation Part Hardware
CM7277EK/CK is packed in 3 cases

EXPLODED VIEW
#2
#1
#3
#4
#4
#5
#6
7 / 9

ASSEMBLY INSTRUCTIONS
1
2
Part #3 x1pc
Hardware #E x8pcs
Hardware #F x8pcs
Part #1 x1pc
Part #2 x1pc
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
#C
#A
#D
#2
#1
#B
#E
#G
#F
#4
#4
#3
Part #4 x2pcs
8 / 9
Align HB leg rail (#2) to the
headboard (#1), then secure by using
bolts (#A) with washers (#B,C).
Attach threaded studs (#E) to the
headboard and footboard (#3), then
align the side rails (#4) to the
threaded studs (#E). Secure by using
hex nuts (#F).

X 4
ASSEMBLY INSTRUCTIONS
3
4
Part
Part
Hardware #H x8pcs
#5
#6
9 / 9
#H
#5 x4pcs
#6 x8pcs
Attach support legs (#6) to the slats (#5). Adjust
the leveler on the support legs (#6) according to
ground level.
Align slats to the side rails, then
secure by using screws (#H).