Lightolier Lytecaster Recessed Downlighting 1008 User manual

Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • J1007
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster®Recessed Downlighting 1008
Page 1 of 2 5" Aperture Cone Reflector Trim
7 1/2”
1008/1004IC/N
0™Convertible
IC/Non-IC
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Reflector Trim Frame-In Kit — See Individual Frame-In Kit Specification Sheets
1008 †
Brushed Gold
1010 †
Brushed Clear
1012 †
Specular Gold
1013 †
Specular Clear
1013CD †
Clear Diffuse
1013BK †
Specular Black
1013WH
Matte White
Incandescent Fluorescent
Frame-In Kit Ceiling Type Lamping Height Frame-In Kit Ceiling Type Lamping Height
1000P1 Non-IC 75W A19, PAR30*
75W BR30
6 3/4" 1001F13U Series Uniframe™
Non-IC
(1) Triple 13W (GX24q-1) 5 7/8"
1002P1 Non-IC 75W A19, PAR30*
75W BR30
6 3/4" 1001F18U Series Uniframe™
Non-IC
(1) Triple 18W (GX24q-2) 5 7/8"
1003R Non-IC Remodeler 75W A19, PAR30*
85W BR30
6 3/4" 1004F13 Series IC (1) Quad/Triple 13W (GX24q-1) 7 1/2"
1000IC
1000AICM
IC
IC
40W A19
75W PAR30
65W BR30
7 5/16"
7 5/16"
1004F18** Series IC (1) Quad/Triple 18W (GX24q-2) 7 1/2"
1004F26** Series IC (1) Quad/Triple 26W (GX24q-3) 7 1/2"
1004SIC/N
1004SICR
IC
IC Remodeler
65W BR30
50W PAR30
5 1/2"
5 1/2"
1001F13ICU/N Performance
IC
(1) Triple 13W (GX24q-1) 7 1/4"
1004IC/N
1004ICR
Non-IC
Non-IC Remodeler
75W PAR30*
85W BR30
60W A19
7 1/2"
7 1/2"
1001F18ICU/N Performance
IC
(1) Triple 18W (GX24q-2) 7 1/4"
1004SIC/N
1004SICR
Non-IC
Non-IC Remodeler
75W PAR30*
85W BR30
5 1/2"
5 1/2"
1910XFH1 Conversion
Kit
(1) Quad 13W (GX23-2) 7 1/2"
1004ICX/N IC 60W A19
75W PAR30
85W BR30
7 1/4"
1004IC/N
1004ICR
IC 40W A19
50W PAR30
65W BR30
7 1/2"
†= add “NM” to sku for NaturalMetal™ flange ** Lightolier recommends the use of triple tube lamps.
Features
1. Reflector: Hydroformed aluminum, .040" thick, (18 ga.); Anobrite™
(anodic-processed) semi-specular finish for permanent reflectivity;
matte white or Natural Meta™ trim flange.
2. Cone: Aluminum cone painted or anodized finish.
3. Frame-In Kit: (1002P1 standard frame shown). Other frames listed above
and shown on the right. See Frame-In Kit specification sheets for more
details.
Options & Accessories
Lytegems®: See 1400 Series Specification Sheets
Retaining Clips: 1955 - For Installing in Existing Ceiling
Extra Wide Flange Trim Ring: 1957 - 7" O.D.
Medium - Base 1968 - For use w/short neck PAR30
Socket Extender: lamps indicated above (*).
Labels
UL (Suitable for Damp Locations), I.B.E.W.
1008/1002P1 Series
Standard Incandescent
6 3/4”
4 5/8”
5 7/8”
6 3/4”
1008/1003R
0™Non-IC
Remodeler Ring
*(See Socket Extender Accessory) **75W when used with 1013BK

Job Information Type:
Lytecaster®Recessed Downlighting 1008
Page 2 of 2 5" Aperture Cone Reflector Trim
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • J1007
To convert lighting data for a lower wattage incandescent lamp of the same type, multiply the footcandle (or candlepower) values by the ratio of the lumens of the two lamps.
The coefficients of utilization remain the same.
Conversion Factors: 75W PAR30 FL: Brushed Clear & Gold, White C.U. x 1.0;
Black, C.U. x 0.85. 75W BR30: Specular Clear & Gold, C.U. X 1.0; Brushed
Clear & Gold, C.U. x 0.9; White, C.U. x 0.95; Black, C.U. x 0.65.