Lights.com LC004951 User manual

1
INSTALLATION INSTRUCTIONS
WHAT WE PROVIDE
• Carroll 9FT Pre-Lit Flocked
Mixed PE/PVC Garland
• Plug-in Power Supply
1
STYLE YOUR GARLAND
The branches on the garland come tightly
packed for shipping. Separate and style the
branches for your desired look.
IMPORTANT
Before using your Carroll 9FT Pre-Lit Flocked Mixed PE/PVC Garland, make
sure that you carefully read through these instruction sheets.
NOTE: The important safeguards and instructions that appear in this manual are
not meant to cover all possible conditions and situations that may occur. It must
be understood that common sense, caution, and care are factors that cannot be
built into any product. This approach must be used by the person(s) caring for
and operating the garland.
GENERAL INFORMATION
The garland is suited for indoor use only. DO NOT attempt to replace or repair any
damaged cable parts. After use, ensure the garland is clean and dry before storage.
DO NOT DISPOSE IN FIRE. Please dispose at your local recycling facility.
STEP BY STEP INSTRUCTIONS
Before using your garland, remove packaging. When setting up your garland,
carefully position cables to avoid a tripping hazard.
NO. LC004951

INSTALLATION INSTRUCTIONS
2
3
PLUG IN THE GARLAND
Insert the plug into your wall outlet to illuminate the garland.
4A
2
HOW TO EXTEND THE GARLAND
Should you purchase additional garlands, you may wish
to connect them together. Before connecting, be sure that
all garlands are unplugged. Find the female connector at
the end of the original garland. Remove the plug from
the additional garland.
HANG YOUR GARLAND
Select a location with a power outlet closeby. Be sure that
the garland is hung or placed securely to support the
weight of the garland.
NO. LC004951
FEMALE CONNECTOR
MALE
CONNECTOR

INSTALLATION INSTRUCTIONS
3
4B
4C
4D
HOW TO EXTEND GARLAND CONT.
To give the illusion of one continuous garland, wrap the
lead wire around itself and position in the branches to
conceal.
NOTE: The garland can be connected up to a total of 3
individual garlands. DO NOT connect more than 3
garlands together at any time.
HOW TO EXTEND GARLAND CONT.
Connect the female connector at the end of the original
garland to the male connector at the beginning of the
lead wire on the additional garland
HOW TO EXTEND GARLAND CONT.
Insert the plug from the original garland into your wall
outlet. Both garlands should now be illuminated.
NO. LC004951
ORIGINAL GARLAND
ADDITIONAL GARLAND