LightsOn STREAM User manual

STREAM
OUTDOOR SPEAKER
Wireless
SPECIFICATIONS
Art. no: 5103
Voltage: 230V
Amplifier: Active, integrated
RMS Power: 60W
Woofer: 6.5”
Tweeter: 1”
Diameter: 36cm
Height: 41cm
Cable length: 2m
IP Class: IP56, weatherproof
Bluetooth: Up to 20m
Wireless pairing: Max 2 units, up to 10m
Scan for more information
THANK YOU FOR CARING
Always recycle!
Please refer to the local environmental
laws for recycling.
LightsOn AB
Terminalgatan 3
235 39 Vellinge
Sweden
www.lightson.se
CARE & MAINTENANCE
Ensure all equipment is turned OFF prior to
cleaning. Surfaces and cabinet need only occasional
dusting/cleaning. Never touch the speaker drivers.
Never use chemicals or solvents as they may
damage the surface.Clean using a damp cloth.
SAFETY INSTRUCTIONS
1. Read the instructions carefully before
installation and use. Keep the manual safe for
future reference.
2. Ensure the location you have selected to install
the speaker will provide proper support and
does not have obstructions that might interfere
with the sound. Never submerge the speaker in
water.
3. Do not touch or bump the woofer and tweeter. lf
these are damaged, the sound will be distorted.
4. Protect the power cable from being damaged.
Do not stretch the power cable or place it near
sharp objects that may damage it.
5. A damaged cable must be repaired or replaced
by an autorised electrician.
6. Never turn up your speaker volume to the point
of distortion and always reduce volume prior to
switching input sources.

BLUETOOTH CONNECTION
1. Connect the speaker to the power supply.
2. Press the Bluetooth button briefly (do not hold). The
speaker is now ready to connect to your phone.
3. Locate the speaker (named LightsOn Stream) in
the Bluetooth settings on your phone and connect.
PAIRING SPEAKERS (optional)
1. Press the Bluetooth button on the main speaker for
two seconds. The main speaker is now ready to pair
with the second speaker.
2. Now press the button on the second speaker for
two seconds. The speakers are now paired together
for wireless stereo sound.
If you wish to disconnect the second speaker, briefly press
(do not hold) the Bluetooth button twice.
LightsOn Stream
TROUBLESHOOTING
If a problem arises, please check the FAQ below
Q: The speaker has not been found during
Bluetooth setup.
A:
1. Please check that the power cable is connected.
2. Make sure that you have pressed the speaker
Bluetooth button to activate Bluetooth.
3. Make sure that the speaker is within 10m range
of your phone during setup.
Q: The speaker connects to the phone but there
is no sound.
A: Ensure that the volume is turned up on the
phone and that it is not muted.
Q: The sound is distorted when playing bass
heavy music very loud.
1. Turn down the volume until the distortion
disappears.
2. Adjust the bass level in the equalizer (or treble /
bass) on your phone.
Q: The second speaker (optional) does not pair
with the first speaker.
A: Follow the steps for pairing two speakers
and make sure that the distance between the
two speakers is max 10m.
Loudspeaker
KNOW YOUR SPEAKER
The speaker usually needs a break-in period of 20-30h
play time to reach optimal sound quality.
Stream has a built in equalizer that is optimized for
great outdoor sound. If you prefer different sound
characteristics, please adjust the equalizer, or treble /
bass, on your music source.
Bluetooth /
pairing button
Press the speaker button for 10 seconds if you wish to
delete all connection data and restore to factory default
setting.
Main speaker Second speaker