
Copyright Lightyourbike 2021 ©
MOUNTING
1. Remove screw from holder.
2. Place holder on handlebar.
3. Tighten screw.
4. Slide BEAM XL in holder and push back.
5. The BEAM XL is now attached.
6. Remove BEAM XL: press clip, and slide BEAM XL out.
USAGE
- IPX5 certification makes the BEAM XL spray proof.
- If the lights are not used for a long time, make sure they are fully charged and
repeat this after 3 months when the lights are not being used. In this way the
battery capacity remains in good condition.
WARRANTY
- This product has a one-year limited warranty from the day of purchase. This
warranty includes mechanical and electrical defects, as well as manufacturers
defects in workmanship and materials
- No warranty on defects or damage resulting from excessive use or repairs
performed by an unauthorized company/person.
TECHNICAL REFERENCES AND QUALIFICATION
GB 22791-2008 / ISO 6742-1:1987