LIGNEUS LPKTRI-J1-NAT User manual

MPN: LPKTRI-J1-NAT Ligneus Junior Natural Climbing Triangle 800 x 900 x 790 GTIN: 5060632680952
For more information visit https://ligneus.co.uk/pikler-inspired
Junior Natural Climbing Triangle
What’s included:
Parts:
Long legs short legs Triangle fixing plates Rungs
Stabiliser plates Stabiliser brackets Quick Release handles
Tools & fixings:
Female threads Male threads Allen Key Screws
What you will need:
•Competent adult supervision
•PZ2 Pozi head Screwdriver
PLEASE NOTE: ASSEMBLY KIT CONTAINS SMALL PARTS

MPN: LPKTRI-J1-NAT Ligneus Junior Natural Climbing Triangle 800 x 900 x 790 GTIN: 5060632680952
For more information visit https://ligneus.co.uk/pikler-inspired
Assembly instructions:
i) Fit 6 rungs into 1 short leg
ii) Fasten with 6 male threads into the embedded female
threads in the end of each rung using the Allen key
iii) Slide 2 stabiliser support brackets on to the bottom rung (End
without additional holes) ensuring alignment with leg (fig.1)
iv) Fasten the remaining short leg on the other end of the rungs
v) Repeat steps i,ii, iii & iv with 7 rungs on the long legs
vi) Insert 6 female threads in the additional holes on the inside of
each leg –2 on the long legs and 1 on each of the short legs
(there is already an embedded thread in each of the short
legs for the quick release handle)
vii) Hold up the 2 sides to form the basis of the triangle
viii) Attach the 2 triangle fixing plates to either side of your formed
triangle using 3 male threads in each, leaving the remaining
hole for the quick release handles.
ix) You will find the short leg now pivots. This can be secured in
place with the quick release handles
x) When you have constructed the triangle, turn it over and fix
the stabiliser plates to the support brackets as shown (fig.2)
with the 4 supplied screws. Each screw location has a pre-
drilled hole to facilitate the attachment.
Scan QR code for an electronic copy of the
assembly instructions
Fig.1
Fig.2
Do contact us if you are unsure of the assembly instructions