Limerick Love Specification sheet

Scan for video instructions
or visit limerickinc.com
*click on support
Get
started

What’s in the box?
Pump assembly
Pump stand
Storage container
Container cap
Cap insert
Gasket

Sanitize
Put all of the parts—except the pump handle—into a
large kitchen pot lled with water.
Bring to a boil for between two and ve minutes. Using
a pair of tongs, pull out the parts and place them on a
clean paper or cloth towel.
1

2
The breast cup assembly & the pump body
1. Insert the silicone breast cup into the breast cup
brace until the end of the breast cup extends out of
the back of the brace.
2. Attach the breast cup and breast cup brace to the
body of the pump as shown.
1
2

3
The duck valve & the diaphragm
1. Place the diaphragm in the top of the body of
the pump, and press down along rim to create a
tight seal.
2. Push the duck valve into the bottom end of the
pump body.
Diaphragm
1
Duck valve
2

Attaching the handle
The handle attaches to the body of the pump in
two places.
1. Place the “U” shape under last notch on stem in
diaphragm, and snap in place.
2. Turn the pump assembly upside down, snap handle
onto “T” bar on body, and lock in place.
4
1
2

The storage container & the cap
1. Push gasket into the bottom of the body of
the pump with ridge side facing down. Press
rmly in place.
2. Screw storage container into the body of the pump.
3. Snap cap onto the pump body with large opening
facing the handle.
5
Flat side
Ridge side
Cap
3
Gasket
1
Storage container
2

Using your Love pump
Center the nipple in the breast cup.
Begin pumping by squeezing the handle halfway and
rapidly, several times.
Once the milk starts owing, slow down your speed,
and squeeze the handle fully or to your comfort level—
pumping usually takes 10 to 15 minutes per side.
When your pumping session is complete, unscrew
the storage container from the pump body and screw
on the cap.
6

Wash after each use
1. Rinse with cool water to remove milk residue.
2. Wash all the parts in hot soapy water. Breast cups
are dishwasher safe. However, we recommend
washing by hand or using the steam sanitizing bags
to avoid soap residue from the dishwasher.
3. Rinse in hot water and place parts on a clean towel
to air dry.
7
1 2 3

Thanks for
choosing us
Caution
Limerick breast pumps operate differently
than all other pumps on the market—use
only Limerick brand accessories to ensure
that your pump will work properly.
© Limerick Inc.
Do not share these parts.
i
limerickinc.com
[e-mail]
818.566.3060