Lincoln Electric Weldanpower 125 User manual

WELDANPOWER®125
DC Stick Welder/AC Generator
125 Amps DC Welding Output / 4,500 Watts AC Power

ADVANTAGE
LINCOLN
• Single, full range welding current
control dial.
• Automatic idle control for greater
fuel economy.
• All copper stator and rotor windings
with high quality insulation for
reliability & long life.
• Maintenance-free electronic ignition
with on/off switch.
• Recoil start with compression
release for easy engine starting.
• Low oil shutdown to protect engine
from damage.
A CLOSER LOOK
THE TOTAL
SOLUTION
The Weldanpower 125 is a
combination DC stick welder and AC
generator for a wide variety of
outdoor uses.
It is designed to be simple and easy
to use. The compact size and tubular
roll cage make this machine very
portable, either for welding needs or
AC generator needs. An excellent
choice for the first-time buyer!
• 125 Amp DC Welder for Stick
Welding with a Wide Range of
All Purpose Electrodes.
• Simple and Easy to Use for
Welding Repairs and Fabrication.
• 4,500 Watts of 115V/230V, 60Hz,
AC Power for Tools, Lights,
Electric Pumps, etc. (3,500
Watts - CSA Version.)
• Briggs & Stratton Top-of-the-Line
9 HP, OHV Vanguard®(1) Engine for
Maximum Performance and Long
Life.
• Tubular Roll Cage Design for
Portability.
WELDANPOWER®125
Current
Control Dial
Hour
Meter
Idler
Control
Electrode
Selection
Guide
Welding
Output
Studs Grounding
Stud
Circuit
Breakers
Output
Receptacles
• Engine hour meter for periodic
maintenance.
• Circuit breaker protection for AC
power.
• Canadian Standards Association
(CSA) model available.
• Manufactured under a quality
system certified to ISO 9002
requirements.
• Two year Lincoln warranty.
(Separate engine warranty per
manufacturer).
(1) Vanguard is a registered trademark of
Briggs & Stratton Co.

TECHNICAL
SPECIFICATIONS
Engine
Model Description
Horsepower &
Displacement Ignition Capacities
Operating
Speeds
Fuel
Consumption
Briggs & Stratton
Vanguard
1 Cylinder,
4 Cycle,
Overhead Valve,
Air-Cooled,
Gasoline Engine,
Aluminum Alloy,
Cast Iron Liners
9 HP
@ 3,600 RPM
18.1 cu in
(297 cc)
Manual,
Recoil Start;
Manual
Choke
Fuel:
1.8 gals
(7.0 ltrs)
Oil:
1.25 qts
(1.2 ltrs)
Machine
Engine
Product
Name
Weldanpower
125
Ordering
Information
K1444-1
K1444-2
CSA
Description
Rated DC Output
Amps / Volts / Duty Cycle
AC
Power(1)
125 Amp DC
Arc Welder
with
4,500 Watts
(3,500 Watts CSA)
AC Power
DC Constant Current
125A / 25V / 30%
100A / 25V / 60%
4,500 Watts, 60 Hz (2)
40 Amps @ 115V (3)
20 Amps @ 230V
CSA
3,500 Watts, 60 Hz (2)
30 Amps @ 115V (4)
15 Amps @ 230V
Dimensions & Weight
H x W x L
21 x 20 x 30 in
(530 x 508 x 702 mm)
190 lbs
(86 kgs)
(1) When welding, available auxiliary power will be reduced.
(2) 115V will operate either 60 Hz, or 50/60 Hz power tools, lights, etc.
(3) Each branch circuit can supply up to 20 amps at the same time. (Circuits cannot be wired in parallel to operate the same device.)
(4) Each branch circuit can supply up to 15 amps at the same time. (Circuits cannot be wired in parallel to operate the same device.)
The values listed above are suggested settings. Actual setting may vary depending on individual preference and/or specific application.
Follow tables found in accompanying Lincoln literature for those electrodes not listed. Ask for Lincoln “WELDIRECTORY” Publication
C2.10 for a complete listing of all Lincoln stick electrodes. *AWS (American Welding Society)
Electrode Selection Guide
Material Thickness 1/8” and Thinner 1/8” and Thicker
1/8”
75 - 125 A
70 - 110 A
55 - 110 A
100 - 125 A
90 - 125 A
90 - 125 A
55 - 95 A
80 - 110 A
50 - 125 A
5/32”
---
80 - 125 A
105 - 125 A
---
---
---
80 - 125 A
100 - 125 A
---
3/32”
50 - 70 A
50 - 75 A
50 - 80 A
70 - 95 A
70 - 100 A
65 - 85 A
50 - 60 A
50 - 80 A
---
Electrode AWS*
Type Class
FLEETWELD®5P 6010
FLEETWELD®35 6011
FLEETWELD®180 6011
FLEETWELD®37 6013
JETWELD®LH-70 7018
JETWELD®LH-73 7018
STAINWELD®308-16 308-16
SOFTWELD®99Ni Ni-CI
WEARSHIELD®ABR ---
Electrode Polarity
+
+
+
+ / -
+
+
+
+
+
&
Full Load: 3,500 RPM .8 Gals/Hr
High Idle: 3,750 RPM .3 Gals/Hr
Low Idle: 2,400 RPM .2 Gals/Hr

• Power Plug Kit - Contains two 115V
plugs and one 230V plug rated at
20 amps each. (Not for use with
K1444-2 CSA machine and machines
with GFCI receptacles). Order K802-U
• Power Plug Kit - For CSA machines,
and machines with GFCI receptacles.
Contains two 115V plugs and one
230V plug rated at 15 amps each.
Order K802-T
• Accessory Set - Contains welding
clamps, headshield, work clamp,
electrode holder & sample
electrodes. Includes 20 ft. (6.1m)
electrode cable and 15 ft. (4.6m)
work cable. Order K875
DISTRIBUTED BY:
RECOMMENDED
OPTIONS
• Undercarriage - For moving by
hand. Order K882-2
THE
LINCOLN ELECTRIC
COMPANY
Local Sales and Service through Global
Subsidiaries and Distributors
Cleveland, Ohio 44117-1199 U.S.A
TEL: [phone]
FAX: [phone]
WEB SITE: www.lincolnelectric.com
Engine Driven Welders
E6.51 11/99
Customer Assistance Policy
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of
our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers
based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such
information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice.
As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of
information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these type of fabrication methods and service requirements.
• GFCI Receptacle Kit - Contains one
UL approved 115V ground fault circuit
interrupter duplex receptacle with
cover. Replaces the factory-installed
115V duplex receptacle. Rated at
15 amps per outlet, 20 amps total.
(15 amps total for K1444-2 CSA
machine). Order K896-3