LINK-MI LM-100H User manual

HDMI 100M EXTENDER MANUAL
LM-100H
Industrial Products
Information Release Screen Splicing
Video Conference Teaching Projection
We reserve the copyright have product details, if the parameters and a
minor change and appearance from time to tome, the factory specifications
shall prevail, the company reserves final interpretation @ 2016. all rights
reserved
Product Introduction
LINK-MI LM-100H The HDMI extender, used for HD and non-condensed signal up to 100 meters,
consists of a sender and a receiver. This product through a CAT5/5e/6 or above Copper twisted pair
(line sequence: white w/orange . orange. white w/green . blue . white w/blue. green. white w/brown
. brown) extends those up to 1920 * 1080 @ 60HZ range resolution HD video, independent audio to
the remote, as far as 100 meters, in the meantime, the transmitter provides a HDMI output port for
local display. Different with conventional TCP/IP protocol 100 meters extender is this product image
is a zero delay transmission, without image compression reduction is better; the products imported
by the United States, real-time transmission of video and audio fidelity, anti-interference circuit built
-in lightning protection, which greatly improves the stability of products already working life. the
product can transmit the high fidelity and real-time video, audio, signal.Anti-interference circuit
built-in lightning protection also greatly improves the product ’s stability and operating life. This
product is widely used in the field of computer, home theater, monitoring, education, bank securities
system etc..

Product Features
1.Transmit HDMI signal up to 100m over a single CAT5/5e/6 cable.
2.Support video resolution up to 1920×1080@60Hz.
3.Support local and remote HDMI monitors.
4.Built-in lightning protection.
Panel Description

Connection diagram
Note: This extender supports independent digital audio. If you do not need,you can connect it with the HDMI line
to output video and audio.

Parameter
Items
Description
Function
Transmission Signal Type
HDMI,Independent Digital Audio
Transmission Channel
1 Line
Transmission Distance
100m
Power Section
Power Supply Mode
External Power Supply
Adaptive Voltage Range
5VDC 1A
HDMI Performance
And Interface
Support HDMI Version
HDMI1.3
Support HDCP Version
HDCP1.2
HDMI Resolution
1920*1080@60HZ downward Compatibility
Peak Transfer Rate
1.65Gbps
Audio Signal Transmission
Format
Digital Audio
Interface
RJ45 Cable Cat5e/Cat6 and Above
Performance
adjustment
Picture effect
Receiver Length Knob Can Adjust the Screen Effect to the
Best
Protection Level
Electrostatic Protection
1A Contact Discharge 3 Level
1b Air Discharge Level 3
Implementation Standard: IEC61000-4-2
Operational
Environment
Working Temperature
0~40℃
Storage Temperature
-20～70℃
Humidity (No Condensation)
0～95%
Organism Attribute
Dimensions (L * w * h)
97*98*28mm
Material
Engineering Grade Steel
Weight
0.8KG
Security
Continue Working Time
Before Breakdown
>30000 hours

Packing List
*A pair of 100 meters HDMI extender
* 2 (5V 1A) power adapter
* Operating manual
Matters Need Attention
1.Due to the design of the HDMI interface is specific,all equipments with HDMI interface are not allowed using
hot swap operation in principle.In order to protect HDMI as much as possible during the process of installing and
connecting the HDMI extender, please power off the device power supply (DPS) that host and display needs to be
connected to.When the HDMI line and cable are connected，plug the HDMI extender and open the power supply
connecting with equipments.
2.There are LED lamp power supply and signal indication on the extender sender and receiver. Only plugging into
electricity, HDMI transmitter and receiver HDMI signal light is red, while only inserting the HDMI line，there is no
signal input and indicator; when the HDMI line as a transmitter receiver is connected to the power supply making
the green LED light,it means that HDMI has received signal and power signal, and the equipment can work
normally. If the HDMI line is connected to the power while LED lights are still red, please check that if the host
equipment HDMI signal output is normal and check or replace the HDMI connection line (recommended AWG26
HDMI1.3 standard or above cable, HDMI line length is less than 5 meters).
3. The extension is to be transmitted using a single standard CAT5/5e/6 or more. Cable connection using 568B line
sequence as well as the 8 core cable; non-standard wire is easy to cause problems about poor transmission quality
or transmission distance.
4.The extender adopts the high-definition multimedia interface. Using HDMI to DVI adapter, it can support DVI
digital display interface to transmit DVI signals.Which provides great flexibility in the engineering system.
5. The connecting cable extender should embed wear tube separately. Do not run the lines with 220V or 380V
electric wires or prone to jamming or non screen.
6.The extension has a special grounding device. After the installation is completed, please do well the ground
connection project for both the transmitter and receiver.In this way, it can prevent lightning. Improve the
equipment’s stability and operating.