LINK-MI LM-SD500 User manual

500M Extender SDI-Repeaters (TX-RX)
LM-SD500
User Manual
Brief Introduction
LINK-MI TX500 is to apply for signal transmitting terminal. RX500 is to apply for receiving terminal. LM-SD500 repeaters is a equipment of
HD-SDI signal data transmission, which can support transmitting HD-SDI signal data for 500 meters.
Characteristics
·Support resolution of 1280 x720 (24/25/30/50/60fps) and 1920 x1080 (24/25/30fps)
·Support 20 bit(non-multiplexed) or 10-bit(multi-channel)data width
·Support transmission ratio of 2.97Gbps, 1.485Gbps, 270Mbps
.Embedded surge protection cables
· Light Aluminum Housing, Easy to carry and install
HD-SDI Signal Standard
HD-SDI
(SMPTE 259M)
HD-SDI
(SMPTE 292M)
3G-SDI
(SMPTE 424M)
525i
1280x720P，24/25/30/50/60HZ
1920x1080P, 50/60HZ
625i
1920x1080i，50/60HZ
1920x1080P，24/25/30HZ
Product Content
Description
LM-SD500(TX+RX)
Power Joint
User Manual
Repeater

500m
TX500
RX500
Product Components with connect Diagram
①
②
④
③
1TX500 SDI Input: Input 1.5Gbps HD-SDI signal;
RX500 SDI Input：Input 270Mbps SD-SDI signal
②TX500 SDI Output：Output 270Mbps SD-SDI signal via encoder
RX500 SDI Output: outputting SDI signal data of 1.5Gbps via decoder
③Power & HD-SDI input with LED instruction(Green, Red)
④DC female connector: connect with power adapter of 12V-/-10%
Specifications
Model No.
LM-SD500
Input / Output Signal Type
HD-SDI
Power Consumption
DC12V/1W
Power Input
DC12V/0.07A
Max Distance of Each Pair
RG-6(Belden 1694A)-400m(Full SD:270M)
Connect Info
SDI Signal Joint
BNC-F(75Ω)
Power input joint
DC Female (5.5*2.1)
LED Instruction
Green
OFF:HD-SDI input
Red
ON:Power input
Operation Temperature / Humidity
-10℃-+50℃/0-80%
Housing Material / Gross Weight
AIuminum/61g
Dimension（mm)
87.5(L)x33(W)x22(H)mm
5.Connecting Diagram
LED Color
LED Status
Conditions
Green
ON
No HD-SDI signal input
Red
ON
Power is connected
SDI IN
SDI OUT
DC 12V
LED
3G/HD/SD
Repeater
HD-SDI 720P/1080P