V-TAC VT-8058 User manual
INSTALLATION INSTRUCTION
Model: VT-8058
LED BULKHEAD WITH SOFT LIGHT-OUTDOOR
WEEE Number: 80133970
INTRODUCTION
Thank you for selecng and buying V-TAC LED Bulkhead with so light-outdoor.
V-TAC will serve you the best. Please read these instrucons carefully before
starng the installaon and keep this manual handy for future reference. If you
have any other query, please contact our dealer or local vendor from whom you
have purchased the product. They are trained and ready to serve you at the best.
STRUCTURE & SIZE
INSTALLATION INSTRUCTION
In case of any query /issue with the product please reach out to us at [email protected]
1. Switch off the power.
2. To drill the appropriate holes on the wall. (picture 1)
3. Enter the parcles and install the lamp base on the wall. (picture 2)
4. Connect the light into the mains (100-240V), install the lampshade
and cover the shell. (picture 3)
5. Switch on the power if above steps are done properly without any mistakes.
Table of contents
Other V-TAC Outdoor Light manuals
V-TAC
V-TAC VT-7611 User manual
V-TAC
V-TAC VT-8054 User manual
V-TAC
V-TAC VT-7678-3 User manual
V-TAC
V-TAC VT-ST303 User manual
V-TAC
V-TAC VT-1146 User manual
V-TAC
V-TAC VT-762-2 User manual
V-TAC
V-TAC VT-8056 User manual
V-TAC
V-TAC VT-943 User manual
V-TAC
V-TAC VT-768 User manual
V-TAC
V-TAC VT-1184 User manual
