Linkedpro SR 1906GFP User manual

Wall Rack
User's Guide
Read this user manual before using the equipment
and keep it for future reference.
Rear View
X = Vertical Distance
from Center to Center
9.1" (231mm)
14.4" (365mm)
19.6" (498mm)
26.5" (674mm)
39.4" (1000mm)

SR19XXGFP The information contained in this manual will help you in assembling the
product as well as nding physical characteristics, included parts and recommendations
for use.
- Wrench and / or 7/16” Phillips die.
- Cross screwdriver.
-7/16 screws for assembly
-Phillips screw for side closure
-Plate
-Torrack kit and Tuerrack for installation of the equipment.
Follow the steps described here. Do not fully tighten the screws until indicated.
-Place the lower cover on a at surface.
-Place the back frame inside the lid and one with the screws.
-In the same way, install the front box.
-Install the rails.
-Place the top cover.
-Corroborate the squared and nalize the tightening of all the screws.
-Autumn the racks in the desired position. Each space on the rails equals 1 ".
- Use the cross screws to close the sides
- Turn the metal plate to the closed position, turn the key until you can remove it
from the metal sheet. It’s only possible to remove the key in this position.
-Place the plate on the front door as indicated in the picture and secure it with the
counter-nut.
-Remove the hinge pin from the front door and place it in the perforations
of the cabinet, depending on the type of turn you want.
-Place the cabinet on the wall and secure it.
-Install the equipment inside the cabinet with the tuerrack and torrack
kit included.
If necessary, you can purchase more individual kits separately.
*Screws Included
In thin walls, adobe or other material that is not concrete, it is recommended to pass
the anchor of the cabinet to the other side of the wall and secure on both sides. Use a
suitable anchor according to the material of the wall.
Recommendations
Tools Required
Assembly Required
Accessories Included
Closing the laterals
Lower Cap
Front Cover
Front Frame
Back Frame
Right Side
Door
Perforation
for fan
(not included)
Top Cover
Remove the cover
Perforation for cable access
Rail