Linkedpro LPCV Series User manual

1066.80mm
932mm
SISTEMAS Y SERVICIOS DE COMUNICACIÓN S.A. DE C.V.
Calle 20 de Noviembre #805, Col. Centro
[phone]
C.P. 31000, Chihuahua, Chih, México
Read this user manual before using the equipment
and keep it for future reference
User Manual
Vercal Cable Management
LPCV series Organizers
LPCV21URM LPCV24URL
Individual Organizers
For a double installation,
use only 2 pairs of screws
and 1 pair of brackets to
hold both organizers.

45U 24U
Front Slot
LPCV21URM
LPCV24URL
LPCV24URL
(Racks not included)
Introduction
Thank you for selecting one of our LPCV Series Rack Cable Organizers.
The information contained in this manual will help you in the assembly
of the product as well as finding physical characteristics, included parts
and recommendations for use.
Tool
7/16” ratch with extension and socket.
Installation/ Operation Mode
1.-Screw the organizer body to the fixing bracket, taking care
that the grooves on the front are down. To choose the organizer
perforation.
2- Install the mounting brackets over the prepared holes in the back of your
EIRL or EIRA series Rack (not included) using the included screw kit.
3.- Once you have distributed your wiring properly, place the cover following
the steps as indicated in the image. To remove the cover, first remove the
top organizer cover and then the bottom one.