Linkedpro SR1942GAD User manual

HEIGHT
600
1242
SISTEMAS Y SERVICIOS DE COMUNICACIÓN S.A. DE C.V.
Calle 20 de Noviembre #805, Col. Centro
[phone]
C.P. 31000, Chihuahua, Chih, México
Please read this user manual before using the
equipment and keep it for future reference.
User Manual
SR1942GAD, SR1980GAD
Rack Cabinet
Top View
Model Height
SR1942GAD 1170mm
SR1980GAD 2103mm

Swing-out front door
with tempered glass
Swing-out
side panel
Cable passthrough perforations
(removable plate)
Perforations for ventilation
(removable plate)
Rear door with
ventilation
Introduction
Thank you for selecting our SR1942GAD or
SR1980GAD Rack Cabinet. The information in
this manual will assist you in assembling the
product.
Recommendations
Begin to Install the equipment(s) only until
you have finished installing the Cabinet.
Operation/ Installation Mode
Note:
Install the cabinet on a flat surface. Use the levelers
located on the bottom to position it in a stable and flat
position. The unevenness can cause the doors not to
close completely. For easier equipment installation, you
can remove both doors and sides for full access to the
cabinet. Once the equipment is installed, put the sides
back on and finish placing the doors. Both doors are
hinged and can be installed to vary their left or right
turn.
Make use of the hole indicated in
the image and a screwdriver to
remove the hinge and reverse the
opening direction of the door.