LionTec MPS-2300600 User manual

LionTec GmbH –Gewerbepark Birkenhain21 –D-63579 Freigericht –Germany –[phone]–www.liontec.eu –[e-mail]
Operating Instruction
Mobile Power Supply with accessories and charger
MPS-2300600
Nominal Capacity C1: 25 Ah Nominal Energy: 320 Wh
Nominal Voltage: 12,8 V
Nominal Temperature: 20 °C
The Mobile Power Supply contains a battery. KEEP AWAY FROM CHILDREN.
Only use the Mobile Power Supply with the delivered accessories and charger.
Never use other chargers.
Consider Operating Instruction and place it visible at the place of
charge.
Because of lack of applicable standards consider EN 50272-3 and EN
50272-2
Wear safety goggles while working with or on batteries.
Dangerous voltage.
Avoid touches and short circuits.
Attention! Metal parts and battery the battery itself can have a voltage.
Therefor place no foreign parts or tools to the battery.
1. Safety Precaution
Before using this Mobile Power Supply, please read the "safety instructions" carefully to ensure
correct and safe use, and keep the manual in a safe place. If the Mobile Power Supply is damaged
due to failure to follow the instructions in this manual, the company reserves the right not to carry
out quality assurance.
During operation, please pay attention to all warning signs and operate as required.
Avoid direct exposure to the sun, rain or wet environment to use this equipment.

LionTec GmbH –Gewerbepark Birkenhain21 –D-63579 Freigericht –Germany –[phone]–www.liontec.eu –[e-mail]
The Mobile Power Supply cannot be installed near the heat source area, or near the similar
appliances such as electric heaters and hot stoves.
When placing products, there must have safe space around them to ensure ventilation. When
installing, refer to the instructions.
When cleaning, please use dry cloth to wipe.
In case of fire, please use dry powder fire extinguishers. Do not use liquid fire extinguishers to avoid
the risk of electrical shock.
If the Mobile Power Supply is used outdoor, it must be protected from direct contact with water and
must be protected from condensing water.
2. Operation
Check the Mobile Power Supply for mechanical damages. The accessories and connectors must be
connected safe. The battery must be recharged before and after the use of the Mobile Power Supply.

LionTec GmbH –Gewerbepark Birkenhain21 –D-63579 Freigericht –Germany –[phone]–www.liontec.eu –[e-mail]
3. Usage
Power on and Power off
Main Switch
Switches the device on and off. The DC outputs are activated and deactivated.
Inverter Switch
Switches the 230 V AC output on and off.
4. Maintenance
There is no maintenance necessary.
5. Care
The Mobile Power Supply must be kept clean. If cleaning is required this must be carried out by
dry cloth only.
6. Storage
Keep the storage temperature within normal range as 0° C to 30° C. Do not store the Mobile
Power Supply in direct sunlight.
7. Trouble
In case of troubles the customer service must be called.
July 2019