ListenTALK LK-1 User manual

ListenTALK
Quick Start Guide
For more information visit
www.listentech.com
LED
Belt
Clip
Lanyard
Clip
INTRODUCTION
Thank you for purchasing
ListenTALK!
For additional details
on use, adjustment, or
programming, download the
full ListenTALK Operations
Manual from www.listentech.
com/support/manuals. To
purchase headsets and
other accessories, visit: www.
listentech.com/shop-listen.
Power On
Press and hold Power Button
to turn on. Press and hold
three seconds to turn o.
While unit is on, momentarily
press Power Button to activate
status display and Leader
soft buttons.
Talk
Button
(LK-1 Only)
Leader Clip ( LK-1 only)
Display
Soft
Buttons
• LK-1 Transceiver
• LKR-11 Receiver
Charge ListenTALKs
Remove the protective
screen cover and clear
plastic battery isolation tab.
Fully charge by connecting
Micro USB to USB charger
or charge in the optional
Docking Station. Status
Indicator will be lit solid
when fully charged.
Optionally, insert three
AAA alkaline batteries into
Transceivers equipped with
the Alkaline Battery Case.

Participant – Press and hold
Talk Button to speak; release
to mute. Soft Buttons have
no function. Note: LKR-11 has no
Talkback functionality.
Programming and
ListenTALK Software Suite
The ListenTALK Software
Suite, available at www.
listentech.com/support/
software/, features complete
setup, inventory management,
group creation and naming.
Many options are accessible
from the Transceiver/Receiver
internal menu. Please refer
to the ListenTALK Operations
Manual.
Hearing Safety
This product amplies audio to
a high level which could cause
hearing damage. To protect
your hearing, turn down the
volume before putting on the
Ear Speaker or Headset, then
adjust to your preference.
Medical Device Safety
Before using this product
with an implantable or other
medical device consult with
your physician or the device
manufacturer. Always conrm
you are using this product
in accordance with safety
guidelines established by your
physician or the manufacturer.
© 2018 Listen Technologies Corporation®
All Rights Reserved 2018
Visit Listen at www.listentech.com
or telephone [phone] or
1.800.330.0891
20180427
Recycling
Please help us protect the
environment by properly
disposing of batteries. Take
batteries or equipment to any
electronic recycling collection
point or return them to the
factory.
Connect Headsets
Connect Listen Technologies
headsets or use standard
smart-phone earphones.
BASIC OPERATION
Press Volume Up or Volume
Down button to control
volume.
Leader (LK-1 only) – Press
Talk Button to toggle between
Talk and Mute. Press and
momentarily hold Left Soft
Button to select Talkback
modes (O, Leader or Group).
Right Soft Button initiates
pairing.
Create a Group
Create a Leader and Sub-
Leaders (optional) by inserting
red Leader Clips on LK-1. To
create a Group, Pair Leader
with Participants and
Sub-Leaders in the Docking
Station or using Near-Field
Communications as follows:
Press and momentarily hold
Leader’s Right Soft Button.
Then, touch Leader’s back to
each Participant’s and
Sub-Leader’s back. A beep
Indicates successful pairing.
Create multiple, independent
ListenTalk Groups by
repeating this process,
with additional units.