LitAIR SmartPro User manual

LitAIR - SmartPro
Model BTS2003
USER GUIDE
www.litiscool.com
----------------------------------------------------------------------------------------------------------
AirPod Pro Case with Anti-lost and Touch Gesture Remote Control Functions.
Description
LitAIR is Bluetooth enabled AirPod Pro protective leather case with touch sensor. It operates with
simple touch gesture inputs on the front surface of the device and mobile App. It remotely
controls media playback of mobile devices, allows you to remotely accept incoming call on your
smartphone, and remotely control turn on/off and shutter release of your smartphone camera.
When it’s connected to e-book or notebook through Bluetooth, you can navigate pages or
presentation slides from up to 10~15 meters(32~49 fts). When a connected smartphone and
LitAIR are out of Bluetooth range, internal haptic motor vibrates and/or buzzer alarms. LitAPP,
available on the Google Play Store or the Apple App Store, works with LitAIR and makes it easy to
use as well as offering extended features.
Touch
Sensing
Area
Front View
Right View
Lightning Port
Button for Power ON/OFF,
Bluetooth Pairing and Mode
Switching
Left View

Getting Started
Press Power ON/OFF button for longer than 3 seconds until LED blinks. If LED does not blink at
all, connect to Lighting charger, then press Power ON/OFF switch again.
Press the button for 3 seconds: Power ON
Bluetooth Connection
After unboxing LitAIR and turn on power, it
automatically enters Bluetooth pairing mode..
For manual pairing, press Power button 3 times
consecutively. Blue LED blinks when it’s in paring mode.
When LitAIR_XXX is discoverable on the device list, then
tap the name on the list to connect. LED blinking color
represents operating mode.
Press the button 3 times consecutively: Pairing mode ON
Buzzer/Vibration ON/OFF
Press the button twice consecutively then Buzzer and Vibration Anti-Lost function toggles
between enabled and disabled.

Bluetooth Anti-Lost
Anti-Lost is activated when LitAIR is connected to a smartphone through Bluetooth. If those
connected devices are out of Bluetooth connection range, both LitAIR and the smartphone
respond and generate alarm signals. If LitAPP was running at that time, it locates the
disconnection spot on a map.
Mode Switching
There are four different operation modes, you can enter the mode in the order below by pressing
mode switching button. LED blinking color represents current operation mode
Enable or Disable Touch Function
Touch function can be set to be enabled or disabled to avoid unwanted touch input and
Multimedia Mode
LED: Green
Camera Mode
LED: Sky Blue
Presentation Mode
LED: Yellow
Device Mode
LED: Violet

malfunctioning.
1. Keep touching ‘Lit’logo on the front of LitAIR for 3 seconds, then Touch function is disabled
and LED color changes to white.
2. Press ON/OFF button on the side, then Touch function is enabled. .
Touch Gesture Input
Touch ‘Lit’ logo for 3
seconds to disable
Touch function
Press ON/OFF
button to enable
Touch function

LED Color/Blinking Assignment to the Operation
LED
Blue
Red
Green
Sky Blue
Yellow
White
Bluetooth
Disconnected
Blinking
slowly
Bluetooth Pairing
Mode
Blinking
Low Battery
Blinking
Battery Charging
ON
Fully Charged
ON
Touch Input
Detected
Blinking
Multimedia Mode
& Call Receive
Mode
Blinking
Call Receiving
Blinking
Camera Mode
Blinking
Presentation Mode
Blinking
Swipe Left/Right, Scroll Up/Down,
Double Tapping
Swipe/Scroll and then Hold
Palm Touch

Function and Operation by OS
Android
Mode
Multimedia/
Call Receive
Camera
Presentation
Double Tapping
Play/Pause,
Accept Call Receive
Shooting Once
Begin Slide Show
Scroll Up
One Step Volume Up
Shooting Once
First Slide
Scroll Up and then Hold
Continuous Volume
Up
Continuous Shooting
Scroll Down
One Step Volume
Down
Shooting Once
Last Slide
Scroll Down and then Hold
Continuous Volume
Down
Continuous Shooting
Swipe Right
Next Music
Next Slide
Swipe Right and then Hold
Fast Forward
Fast Forward
Swipe Left
Previous Music
Previous Slide
Swipe Left and then Hold
Rewind
Exit
Rewind
iOS
Mode
Multimedia/
Call Receive
Camera
Presentation
Double Tapping
Play/Pause,
Accept Call Receive
Shooting Once
Begin Slide Show
Scroll Up
One Step Volume Up
Shooting Once
-
Scroll Up and then Hold
Continuous Volume
Up
Continuous Shooting
Scroll Down
One Step Volume
Down
Shooting Once
-
Scroll Down and then Hold
Continuous Volume
Down
Continuous Shooting
Swipe Right
Next Music
Next Slide
Swipe Right and then Hold
Fast Forward
Fast Forward
Swipe Left
Previous Music
Previous Slide
Swipe Left and then Hold
Rewind
-
Rewind

Windows
Mode
Multimedia/
Call Receive
Presentation
Double Tapping
Play/Pause,
Begin Slide Show
Scroll Up
One Step Volume Up
First Slide-
Scroll Up and then Hold
Continuous Volume Up
Scroll Down
One Step Volume Down
Last Slide
Scroll Down and then Hold
Continuous Volume Down
Swipe Right
Next Music
Next Slide
Swipe Right and then Hold
Fast Forward
Fast Forward
Swipe Left
Previous Music
Previous Slide
Swipe Left and then Hold
Rewind
Rewind
macOS
Mode
Multimedia/
Call Receive
Presentation
Double Tapping
Play/Pause,
Begin Slide Show
Scroll Up
One Step Volume Up
First Slide-
Scroll Up and then Hold
Continuous Volume Up
Scroll Down
One Step Volume Down
Last Slide
Scroll Down and then Hold
Continuous Volume Down
Swipe Right
Next Music
Next Slide
Swipe Right and then Hold
Fast Forward
Fast Forward
Swipe Left
Previous Music
Previous Slide
Swipe Left and then Hold
Rewind
Rewind
Charging LitAIR
Connect a Lightning charger to the Lightning port on the side. It charges both LitAIR and AirPod
Pro simultaneously.

Bluetooth
Bluetooth 4.2 LE
Bluetooth wireless range: Max 10~15m(32~49 fts).
Frequency: ISM Band 2.4GHz
OS
OS compatibility: Android, Windows, iOS & macOS,
Functions
Music play/pause, navigation, volume up/down,
Camera shutter remote
e-Book remote
Presenter remote
Incoming call remote accept
Specifications
Supports sleep and wake-up functions
LED indication for touch input, Bluetooth pairing, low/full battery and mode switching
ON/OFF power button to maximize battery life
Current consumption: under 6mA at normal operation
under 800uA at sleep mode
Power supply: 3.8V/80mAh, 0.3084WH, Li-ion Rechargeable Battery,
Battery charge time: 0.5 hour
Battery life: Approximately 2 days of continuous usage, 5 days at stand-by mode
Connect a Lightning charger to the Lightning port on the side and
charge LitAIR and AirPod Pro simultaneously.
Wireless charger charges AirPod Pro only.
Wireless
Charger

Certifications
KC: R-R-btu-BTS2003
TELEC: R210-126452
FCC: 2ASN3BTS1801
CE: CTS-R19-0025
FCC Warning Statement
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are not expressly
approved by the manufacturer may void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 10cm between the
radiator and your body.
Physical
Dimensions: 60 x 50 x 35mm
Device Weight: 40g (0.7oz)
Available Colors: Black, Brown and Red
Mobile App
LitAPP is available on the Google Play Store or the App Store
LitAPP
BLUETIUM

Additional Features included in LitAPP
Compatible with Android and iOS
Battery status, Bluetooth signal strength
Operation mode switching
One-touch App activation
Finding my smartphone, Finding my Lit ZERO
Music info reader
Smartphone feedback setting
Lit ZERO disconnection alarm
Alarm setting
Package Contents
LitAIR_Smart_Pro
Non-woven fabric envelop
User Manual
Thank you card
Warranty
1 Year limited
Customer Support
Email: [email protected]
Phone: [phone]