Little Seeds 6862096COM User manual

B346862096COM00YX
TM
inside for Assembly Manual
Check us out!
littleseedskids.com

6862096COM
TM
Rowan 6 Drawer Dresser
Keep this Assembly Manual for future reference
Two Adults
recommended
for assembly
This product is not intended for commercial use
Do NOT return this product!
Follow little seeds on
2
For missing or broken parts
-Visit littleseedskids.com
-Call 1-800-489-3351

TM
Do NOT return this product!
Contact our friendly customer service team first for help
Assembly Tips
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit littlwseedskids.com to view the
limited warranty valid in the U.S and Canada
Helpful Hints
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR
- Open your item in the area you plan to keep it for less heavy lifting
- Identify, sort and count the parts before attempting assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (left) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture
3
littleseedskids.com

TM
Before You Start
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
2
3
4
4
littleseedskids.com
Caution: If using a power drill or power screwdriver for screwing,
please beware to slow down and stop when screw is
to do so may result in stripping the screw,

TM
Board Identification
Not actual size
1
2
x1
x1
T6862096010YX
TOP PANEL
T6862096020YX
BOTTOM PANEL
3
4
5
x1
x1
x1
T6862096030YX
T6862096040YX
T6862096050YX
RIGHT SIDE PANEL
LEFT SIDE PANEL
PARTITION PANEL
6
7
8
x2
x6
x6
T6862096060YX
MOLDING
T6862096070YX
FRONT DRAWER
T6862096080YX
LEFT SIDE DRAWER
5
littleseedskids.com

TM
Board Identification
Not actual size
9
10
11
x6
x6
x6
T6862096090YX
T6862096100YX
BACK DRAWER
T6862096110YX
BOTTOM DRAWER
RIGHT SIDE DRAWER
12
13
14
x6
x2
x2
T6862096120YX
DRAWER SUPPORT
T6862096130YX
T6862096140YX
SIDE APRON
FRONT/BACK APRON
15
x1
T6862096150YX
BACK PANEL
6
littleseedskids.com

Hardware Bag Reference Number:
26862096COM0YX
TM
Part List
Actual size
x22
TYX0001
Cam Bolt
x22
x55
TYX0009
CBS 4 x 38
x22
x40
TYX0002
Cam Lock
15-12
TYX0004
DOWEL 8 X 25
TYX0005
DOWEL 6 X 25
x6
x72
TYX0008
CBS 3.5 x 16
x26
TYX0006
NAIL
TYX0033
PH M4 X 20
7
littleseedskids.com

Hardware Bag Reference Number:
26862096COM0YX
TM
Part List
Not actual size
x6 SET
x6
TYX0017
DRAWER SLIDE
350 MM
TYX0027B
CONE KNOB (BLACK)
x1 set
TYX0021
ANTI TIPPING KIT
8
littleseedskids.com

Step 1
TM
x6
x1
TYX0001
TYX0021
Attach the Cam Bolt. For anti- tipping
bracket, do notfullytighten in this step.
1
* raw edges are shaded
9
littleseedskids.com

Step 2
TM
x9
x3 (CL)
TYX0017
TYX0008
Preparation of left side panel
3
Screw Positon
* raw edges are shaded
10
littleseedskids.com

Step 3
TM
Proper orientation of CAM LOCK
x1
x2
x4
TYX0001
TYX0002
TYX0004
Preparation of left side panel
3
* raw edges are shaded
11
littleseedskids.com

Step 4
TM
x9
x3 (CR)
TYX0017
TYX0008
Preparation of right side panel
5
Screw Positon
* raw edges are shaded
12
littleseedskids.com

Step 5
TM
Proper orientation of CAM LOCK
x1
x2
x4
TYX0001
TYX0002
TYX0004
Preparation of right side panel
5
* raw edges are shaded
13
littleseedskids.com

Step 6
TM
x9
x3 (CR)
TYX0017
TYX0008
Preparation of partition panel
4
Screw Positon
* raw edges are shaded
14
littleseedskids.com

Step 7
TM
x1
TYX0001
Preparation of partition panel
4
* raw edges are shaded
15
littleseedskids.com

Step 8
TM
x9
x3 (CL)
TYX0017
TYX0008
Preparation of partition panel
Caution!, Please ensure bolt on the other
side not touching the floor or worktop.
4
Screw Positon
* raw edges are shaded
16
littleseedskids.com

Step 9
TM
Proper orientation of CAM LOCK
x1
x2
x4
TYX0001
TYX0002
TYX0004
Preparation of partition panel
4
Caution!, Please ensure bolt on the other
side not touching the floor or worktop.
* raw edges are shaded
17
littleseedskids.com

Step 10
TM
x10
TYX0004
Preparation of side appron
14
x2
* raw edges are shaded
18
littleseedskids.com

Step 11
TM
x12
TYX0001
Preparation of front drawer
7
x6
19
littleseedskids.com

Step 12
TM
Proper orientation of CAM LOCK
x12
TYX0002
x24
TYX0005
Preparation of lest & right side drawer
9
x6
8
x6
* raw edges are shaded
20
littleseedskids.com