Little Wonder PRO VAC SP User manual

LITTLE WONDER
Parts Manual 4171084
OPERATORS MANUAL
®
PRO VAC SP
MODELS:
5612-12-59 HONDA GX270
MAN 4171085 Rev A. 07-2014 Original Language Instructions

CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some
of its constituents are known to the
State of California to cause cancer,
birth defects and other reproductive
harm.
WARNING
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, wiring
insulation, and related accessories
contain lead and lead compounds,
chemicals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
WASH HANDS AFTER HANDLING.

3
PRO VAC SP
07-2014
TABLE OF CONTENTS FIGURES PAGE
SAFETY.........................................................................................................................................................4-8
LABELS............................................................................................................................................................9
CONTROLS....................................................................................................................................................10
OPERATION ............................................................................................................................................. 11-12
STORAGE ......................................................................................................................................................13
TROUBLESHOOTING ...................................................................................................................................14
DECLARATION OF CONFORMITY ............................................................................................................... 15
WARRANTY ............................................................................................................................... BACK COVER
This Operator Manual is part of the machine. Suppliers of both new and second-
hand machines must make sure that this manual is provided with the machine.
IMPORTANT MESSAGE
Thank you for purchasing this Schiller Grounds Care, Inc. product. You have purchased a world class product, one of the best designed and
built anywhere.
This machine comes with an Operation and Safety Manual, Parts and Service Manual, and Engine Manual. The useful life and good service you
receive from this machine depends to a large extent on how well you read and understand these manuals. Treat your machine properly, lubricate
and adjust it as instructed, and it will give you many years of reliable service.
Your safe use of this Schiller Grounds Care, Inc. product is one of our prime design objectives. Many safety features are built in, but we also rely
on your good sense and care to achieve accident-free operation. For best protection, study the manuals thoroughly. Learn the proper operation
of all controls. Observe all safety precautions. Follow all instructions and warnings completely. Do not remove or defeat any safety features.
Make sure those who operate this machine are as well informed and careful in its use as you are.
See a Schiller Grounds Care, Inc. dealer for any service or parts needed. Schiller Grounds Care, Inc. service ensures that you continue to receive
the best results possible from Schiller Grounds Care, Inc. products. You can trust Schiller Grounds Care, Inc. replacement parts because they
are manufactured with the same high precision and quality as the original parts.
Schiller Grounds Care, Inc. designs and builds its equipment to serve many years in a safe and productive manner. For longest life, use this
machine only as directed in the manuals, keep it in good repair and follow safety warnings and instructions. You’ll always be glad you did.
Schiller Grounds Care, Inc.
1028 Street Road
Southampton, PA 18966-4217
PHONE [phone] • FAX [phone]

4
PRO VAC SP
MODEL NUMBER: This number appears on
sales literature, technical manuals and price lists
and serial tag.
SERIAL NUMBER: This number appears only
on your unit. It contains the model number fol-
lowed consecutively by the serial number. Use
this number when ordering parts or seeking war-
ranty information.
SAFETY
NOTICE !!!
Unauthorized modications may present extreme
safety hazards to operators and bystanders and
could also result in product damage.
Schiller Grounds Care, Inc. strongly warns against,
rejects and disclaims any modications, add-on
accessories or product alterations that are not
designed, developed, tested and approved by Schiller
Grounds Care, Inc. Engineering Department. Any
Schiller Grounds Care, Inc. product that is altered,
modied or changed in any manner not specically
authorized after original manufacture-including the
addition of “after-market” accessories or component
parts not specically approved by Schiller Grounds
Care, Inc. will result in the Schiller Grounds Care,
Inc. Warranty being voided.
Any and all liability for personal injury and/or
property damage caused by any unauthorized
modications, add-on accessories or products not
approved by Schiller Grounds Care, Inc. will be
considered the responsibility of the individual(s) or
company designing and/or making such changes.
Schiller Grounds Care, Inc. will vigorously pursue
full indemnification and costs from any party
responsible for such unauthorized post-manufacture
modications and/or accessories should personal
injury and/or property damage result.
This symbol means:
ATTENTION!
BECOME ALERT!
Your safety and the safety of others is involved.
Signal word denitions:
The signal words below are used to identify levels
of hazard seriousness. These words appear in this
manual and on the safety labels attached to Schiller
Grounds Care, Inc. machines. For your safety and
the safety of others, read and follow the information
given with these signal words and/or the symbol
shown above.
DANGER indicates an imminently hazardous
situation which, if not avoided, WILL result in death
or serious injury.
WARNING indicates a potentially hazardous
situation which, if not avoided, COULD result in
death or serious injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, MAY result in minor or moderate
injury. It may also be used to alert against unsafe
practices or property damage.
CAUTION used without the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided, MAY result in property damage.

5
PRO VAC SP SAFETY
SITE PREPARATION AND CIRCUMSTANCES
• Evaluate the terrain to determine how to safely
perform the job. Only use accessories and
attachments approved by the manufacturer.
• Be sure the area is clear of pets and people,
especially young children. Never assume they will
remain where you last saw them. Stop the machine
if any enter the area.
• Only vacuum in daylight or in good articial light.
• Keep in mind that the operator or user is respon-
sible for accidents or hazards occurring to other
people or their property.
OPERATOR PREPARATION AND
TRAINING
READ THE OPERATION &
SAFETY MANUAL
• If an operator or mechanic
cannot read English, it is
the owner’s responsibility
to explain this material to them. If any portion
of this material is unclear, contact your factory
representative for clarication.
• Become familiar with the safe operation of the
equipment, operator controls and safety signs.
Be prepared to stop the engine quickly in an
emergency. Do not operate or allow another
person to operate this machine if there are any
questions about safety.
• All operators and mechanics should be trained. The
owner is responsible for training the users.
• Wear appropriate clothing, including safety goggles
or safety glasses with side shields when operating.
Wear substantial footwear and long pants. Do not
operate barefoot or wearing open sandals. Long
hair, loose clothing or jewelry may get tangled in
moving parts.
• Wear appropriate hearing protection.
• Wear safety glasses.
• Wear a dust mask to avoid breathing dust.
• Never allow children, unskilled or improperly trained
people to operate this equipment. Local regulations
can restrict the age of the operator.
• Never pick up or carry the unit while the engine is
running.
• Keep warning labels and this operator’s manual
legible and intact. Replacement labels and manuals
are available from the factory.
• Do not operate machine while under the inuence
of drugs or alcohol, or any other condition of
impairment.
• The owner/user can prevent and is responsible for
accidents or injuries occurring to themselves, other
people, or property.
MULTIPLE OPERATORS
• Keep a safe distance between operators when
working together.
MACHINE PREPARATION
• Read engine manual.
• Check operator presence interlock system. Adjust
or have any problems repaired before using.
• Damage to the engine can occur if there is no oil or
oil level is low. Check the oil level and add oil per
engine manual as necessary.
• Do not tamper with or defeat safety devices. Keep
guards, shields and interlock safety devices in place
and in proper working condition. They are for your
protection.
• Keep all fasteners such as nuts, bolts, and pins well
secured.
• Verify that machine and attachments, if any, are in
good operating condition.

6
PRO VAC SP
OPERATING SAFELY
IN GENERAL
• Use extra care when loading or unloading the machine
into a trailer or truck.
• Use caution when making turns and crossing roads
and sidewalks.
• Never operate without guards, plates, or other safety
protective devices in place.
• Do not run the engine in an enclosed area where
dangerous carbon monoxide fumes can collect.
• Never leave a machine unattended. Turn off fan and
stop engine before leaving the machine.
• Keep hands away from the vac air intake and outlet.
• Stop operation if someone approaches.
STARTING
• Start according to instructions in this manual or on the
machine.
• Do not change engine governor settings or overspeed
the engine. Operating the engine at excessive speed
can increase the hazard of personal injury.
SAFETY
INTERRUPTING OPERATION
Before leaving the operator’s position:
-Park on level ground.
-Shut off the engine and remove the key
• Stop the engine and wait until the fan stops rotating:
- before refueling .
• Stop the engine and disconnect the spark plug wire:
- before clearing blockages or unclogging;
- before checking, cleaning or working on the
machine;
- if the machine begins to vibrate abnormally: shut
off machine immediately. Inspect and have repairs
made as needed before restarting;
- except for repairs or adjustments as specically
noted, such as for carburetor adjustment, where the
engine must be running. Keep hands and feet clear
of moving parts in these circumstances.
• Allow the fan to come to a complete stop when
stopping operation to clear blockages, unclog, inspect
the machine, do maintenance or repair.
• Reduce the throttle setting during engine shutdown
and, if the engine is provided with a shutoff valve, turn
the fuel off at the conclusion of mowing.

7
PRO VAC SP SAFETY
OPERATING ON SLOPES
USE EXTRA CARE WHEN OPERATING ON
SLOPES. EVALUATE THE RISKS INVOLVED BEFORE
OPERATING ON A SLOPE
.
• Slopes are a major factor in loss of control and tip
over accidents that sometimes lead to sever injury or
death. All slopes require extra caution.
• Do not operate on slopes if uneasy or uncertain about
the machine stability. Ultimate responsibility for safe
operation on slopes rests with the operator.
• Be sure of your footing on slopes.
• With walk-behind machines, operate across slopes,
not up and down.
• Avoid starting or stopping on a slope. If wheels lose
traction, disengage the blades and proceed straight
down the slope.
• Use lower speeds and exercise caution on slopes.
• Avoid sharp turns to prevent tipping and loss of control.
Use extra caution when changing direction on slopes.
• Walk, never run.
• Be alert to dips and rises which change the general
slope. Watch for holes, rocks, roots, and other hidden
objects in the terrain. Keep away from dropoffs. Avoid
ground conditions which will cause the machine to
slide..
MAINTENANCE SAFETY
In general
• Maintain machine according to manufacturer's
schedule and instructions for maximum safety and
best results.
• Park machine on level ground.
• Never allow untrained personnel to service
machine.
• Guards should only be removed by a qualied
technician for maintenance or service. Replace
when work is completed.
• Adjust or repair only after the engine has been
stopped and the blade has stopped moving.
• Disconnect spark plug wire(s) before doing any
maintenance.
• Replace parts if worn, damaged or faulty. For best
results, always replace with parts recommended by
the manufacturer.
• Do not dismantle the machine without releasing or
restraining forces which may cause parts to move
suddenly.
• Provide adequate support, e.g. jack stands for lifted
machine or parts if working beneath.
• Do not put hands or feet near or under rotating
parts.
• Clean up spilled oil or fuel thoroughly.
• Replace faulty mufers.
• To reduce re hazards, keep the engine, mufer,
and fuel storage area free of grass, leaves, debris
buildup or grease.
• Never attempt to make adjustments while the
engine is running except for repairs or adjustments
as specically noted, such as for carburetor
adjustment, where the engine must be running.
Keep hands and feet clear of moving parts in these
circumstances.

8
PRO VAC SP
STORAGE SAFETY
• Stop the engine and allow to cool before storing.
• Drain the fuel tank outdoors only.
• Store fuel in an approved container in a cool, dry place.
• Keep the machine and fuel containers in a locked stor-
age place to prevent tampering and to keep children
from playing with them.
• Do not store the fuel container or equipment with
gasoline in the tank inside a building where fumes
may reach an open ame or spark.
• Appliances such as furnaces and water heaters
with a pilot light have an open ame.
• Keep petrol (gasoline) storage area free of grass,
leaves and excessive grease to reduce re hazard.
• Clean grass and debris from cutting units, drives,
mufers and engine to help prevent res.
• Clean up any spilled gasoline or oil in the storage
area.
Fuel
• Petrol (gasoline) is ammable;
petrol (gasoline) vapors are
explosive. Use extra care when
handling.
• Store only in containers speci-
cally designed for fuel.
• When refueling or checking fuel level:
- Stop the engine and allow to cool;
- Do not smoke;
- Refuel outdoors only;
- Use a funnel;
- Do not overll;
- If fuel is spilled, do not attempt to start the engine
until the spill is cleaned up and vapors have
cleared.
- Replace caps on fuel containers and tanks se-
curely.
Sparks from static electricity can start res or cause
explosions. Flowing fuel can generate static electricity.
To prevent static electricity sparks:
• Keep containers electrically grounded. Do not ll
containers in a vehicle or on a truck or trailer bed
with a plastic liner. Fill containers on the ground
away from the vehicle.
• When practical, remove petrol (gasoline) powered
equipment from the truck or trailer and refuel it on
the ground. If equipment must be refueled on the
truck or trailer, refuel from a portable container
rather than a dispenser nozzle.
• Keep the dispenser nozzle in contact with the rim
of the fuel tank or container opening until fueling is
complete. Do not use a nozzle lock-open device.
• If fuel is spilled on clothing change it immediately.
WARNING
SAFETY
WARNING
Fans
Do not straighten or weld fans.
Replace damaged or failed fans.

9
PRO VAC SP
WARNING LABELS
Warning labels are an important part of the safety system incorporated in this machine.
Replace labels if damaged or illegible.
LABELS
Maintenance
Before performing any
service or maintenance,
disconnect spark plug wire.
Make sure engine switch if
in the OFF (O) position.
Rotating Parts
- Caution
Contact with rotating fan will cause
serious injury. Keep hands away from
air intake and discharge areas.
Operaton & Safety
Manual
- Read and understand
Operation & Safety
Manual.
- Replace if lost or
damaged.
Attention!
- Wear hearing protection.
- Wear eye protection.
Thrown objects
- Keep area clear of people and pets.
- Do not blow towards people or items that may
be injured or damaged by ying debris.
4171002
Rotating Parts
- Caution
Contact with rotating fac will cause
serious injury. Keep hands away from
air intake and discharge areas.
Vacuuming
Push the rear bail towards the
handle to move forward.
Pull the front bail back toward
handle to move in reverse.
4171006
4168759
Rotating Parts
-Cut/Crush/Entanglement hazard.
-Keep hands away from moving part
-Stop engine before servicing.
-Do not operate with cover removed.
910649
LOCK OUT MECHANISM

10
PRO VAC SP
CONTROLS
THROTTLE (A)
Controls engine speed and vacuum suction level.
CHOKE (B)
Move to the “CHOKE” position to apply the choke.
Move to the “RUN” position to remove the choke.
FUEL SHUT OFF (C)
Move to the “OFF” position to shut off the fuel
whenever transporting the machine by trailer or truck
or during storage. Move to the “ON” position before
starting the engine. The “OFF” position also can
be used to “KILL” the engine as a “KILL” switch is
combined with the fuel shutoff.
ADJUSTING KNOB (D)
Adjusts nozzle height.
RECOIL STARTER HANDLE (E)
Pull to turn over the engine to start it. Guide the
recoil starter handle back to the rope guide for best
rope life. Allowing the rope to snap back will shorten
rope life.
ENGINE SWITCH (F)
Move to the “OFF” position to stop the engine. Move
to the “ON” position before starting engine.
FREE WHEEL ROD (G)
Pull the free-wheel rod until the enlarged boss comes
through the keyhole on the free-wheel bracket, then
slide the rod down the slot to latch it to free wheel or
push the machine without the engine running. Raise
the rod until the enlarged boss pops back behind the
bracket to engage the transmission.
BAIL (H)
Push the bail towards the handle to move the
vacuum forward. Pull the bail back to move in
reverse.

11
PRO VAC SP
PRE-OPERATION CHECK LIST
OWNER’S RESPONSIBILITY
• Review and follow all safety rules and safety decal
instructions.
• Check that all safety decals are installed and in
good condition. Replace if damaged.
• Check to make sure all shields and guards are
properly installed and in good condition.
• Check that all hardware is properly installed and
secured.
• Check to be sure engine is free of dirt and debris.
Pay particular attention to the cooling ns, governor
parts and mufer. Clean air intake screen. Check
air cleaner; service as necessary.
• Check all lubrication points and grease as instructed
in manual.
• Check that there are no exposed underground
utilities in the work area.
FUELING-Gasoline is extremely ammable and
highly explosive under certain conditions. BE SURE
to install fuel cap after fueling.
• Fill fuel tank with good quality, clean, unleaded
regular petrol (gasoline) to the level recommended
by the engine manufacturer.
• Use a funnel to avoid spilling.
WARNING
TO CHECK OR ADD FUEL:
– Do it outdoors
– Do not smoke
– Stop engine; allow to cool
– Do not overll
– Clean up spilled fuel
BEFORE STARTING THE ENGINE
• Read the operator manual and engine manual.
• Be familiar with all controls, how each functions and
what each operates.
• Check the engine oil level and add if necessary.
Follow the engine manufacturers recommendations
per the engine manual supplied with the machine
• Open the fuel valve.
• Check that bag is securely in place.
• Select the height of the nozzle.
OPERATION
STARTING THE ENGINE
1. Open the fuel valve.
2. Move the switch to the “ON” position.
3. Move the choke lever to the “CHOKE” position for
cold starts. (Choke may not be required to start a
warm engine. Too much choke use may ood the
engine and cause hard starting.)
4 Move the throttle to midway between the fast and
slow positions.
5. Pull the recoil starter slowly until resistance is felt,
then pull rmly to start the engine.
6. After the engine starts, slowly back the choke off
until the engine runs with no choke at all.
7. Set the desired engine speed with the throttle.
STOPPING THE ENGINE
1. Drive machine to level ground and release the bail.
2. Engage the Lock Out Mechanism.
3. Move the engine switch to the “OFF” position.

12
PRO VAC SP
OPERATION
VACUUMING
1. Adjust nozzle to select height by turning the nozzle
control knob and secure position with wing nut.
2. Start the engine and release the dump valve.
3. Release lock out mechanism.
4. Push bail forward to move vaccum forward and pull
back to move in reverse.
Examples of items suitable to be vacuumed:
-leaves -dry mulch
-small twigs -litter
-acorns -thistles
-seed pods -small cans
-grass clippings -paper products
-straw -styrofoam products
-wood chips
Examples of items/areas to avoid.
-excessively wet surfaces and debris
-gravel surfaces
-large hard objects
-rocks
-long brous materials (vines, ropes, string, etc.)
Do not force anything in to the vacuum. If an item is too
large to t, pick it up separately.
EMPTY DEBRIS BAG
1. Turn off the engine by moving the throttle to the
“SLOW” position. Turn the engine switch to the “OFF”
position. Let the engine come to a complete stop.
2. Roll vacuum to the level unloading location.
3. Open the clasp on band clamp to release bag.
4. Avoid dragging the bag to prolong the bag life.
5. Empty the bag. Handle straps are located on the
under side of the bag for aid in dumping content..
6. Reconnect the bag to the collector.
REMOVING BLOCKAGES / CLOGS
1. Turn off the engine by moving the throttle to the
“SLOW” position. Turn the engine switch to the “OFF”
position. Let the engine come to a complete stop.
2. Remove spark plug wire.
3. Remove bag and/or hose and clear the blockage.
Wear gloves as there may be sharp materials in the
clog.
4. Reinstall the bag and/or hose.
5. Reconnect spark plug wire.

13
PRO VAC SP STORAGE
STORAGE
To prevent possible explosion or ignition of vaporized
fuel, do not store equipment with fuel in tank or
carburetor in an enclosure with open ame (for
example, a furnace or water heater pilot).
DAILY STORAGE
1. Stop the engine and engage the parking brake.
2. Check engine oil level and air lter element.
3. Close fuel valve located below air cleaner to keep
fuel from draining into engine.
4. Remove any material stuck under the deck.
EXTENDED STORAGE
Before the equipment is put into storage for any
period exceeding 30 days:
1. Drain all fuel from the fuel tank and fuel lines.
2. Start the engine and run until all the fuel is used
from the carburetor oat bowl.
3. While the engine is still warm drain the oil. Rell
with the proper weight oil corresponding to what the
engine manual says.
4. Lubricate all lubrication points.
5. Clean and oil cutting blades to prevent rust.
To put equipment into operation after an extended
storage:
1. Check for loose parts, tighten if necessary.
1. Fill fuel tank with clean fresh fuel.
2. Check oil level and add if necessary.
3. Check fuel lines and system for leaks. Repair any
leaks before operating
4. Start the engine and proceed to operate for the
intended use.
WARNING
TO CHECK OR ADD FUEL:
– Do it outdoors
– Do not smoke
– Stop engine; allow to cool
– Do not overll
– Clean up spilled fuel

14
PRO VAC SP
TROUBLESHOOTING
COMMON PROBLEMS COMMON CAUSES
ENGINE WILL NOT START.
(Check the Engine Manual for more
details.)
• Refer to the section “Operation” in this manual to verify engine
starting procedure.
• Check the spark plug connection.
• Check that throttle lever is set to the “FAST” position and the choke is
“ON”.
• Check the level of fuel
• Check fuel valve is “ON”.
ENGINE STARTS BUT DOES NOT
RUN PROPERLY OR HAS NO
POWER.
(Check the Engine Manual for more
details.)
• Make sure the throttle lever is not set to the slow setting or the choke
still in the “ON” position.
• Turn the machine off and check the air lter. If it is dirty clean or
replace it according to the Engine Manual.
• Check the oil level in the engine. Add if necessary. If the oil is too
full drain the oil to the proper level.
• Check to make sure there is enough fuel. Also make sure the fuel
is not old, dirty or the machine has not been stored beyond a month
with the same fuel in it.
• If the engine still has problems contact your dealer for service.
ENGINE HAS SMOKE COMING FROM
IT.
(Check the Engine Manual for more
details.)
• Check to make sure the machine is not running on “CHOKE”
• Check to make sure the oil is not overlled.
• Check the air lter for debris and clean if necessary.
• Check the engine for debris build up around the exhaust system.
MAKE SURE THE ENGINE HAS HAD THE PROPER TIME TO
COOL BEFORE TOUCHING HOT PARTS.
• If there is still smoke coming from the engine contact the nearest
dealer for service.
ENGINE RUNS AND STARTS BUT
THE MACHINE WILL NOT GO
FORWARD OR IN REVERSE.
• Check that the free wheel lever is pulled out.
• Check to make sure the direction lever is being pressed far enough
down or pulled up to make the machine move.
• With the engine off and check the transaxle belt is not broken or
fallen off the pulley. Replace belt if necessary.
• Make sure nothing is lifting the machine up off the wheels.
MACHINE IS DIFFICULT TO GET INTO
REVERSE OR FORWARD.
• Check linkage for free operation.
THE BELT IS FRAYED OR KEEPS
COMING OFF THE PULLEY.
• Check the pulley to make sure it is free from damage such as a nick
or crack. If the pulley feels rough call a dealer for service and a
replacement pulley.
• Check the belt for wear and damaged spots. If there are signs of
damage or wear on the belt, replace with the correct type of belt.
• Check the belt tension. If V-belts are under tensioned, they can slip.
Slippage generates heat and will result in cracking and belt failure.
Properly tensioning and aligning a belt drive will allow the belt drive
to perform at it’s maximum level. If belts are over-tensioned, belt and
bearing life can be reduced.
• If the belt and pulley appear to be in good condition, contact your
dealer for service.
TROUBLESHOOTING

15
EC Declaration of Conformity
4171087 REV A
The Undersigned Manufacturer:
Schiller Grounds Care, Inc. Kurt Knudsen
1028 Street Rd. Director of Operations
Southampton, PA 18966 Date: 30th July 2014
EU Authorized Representative:
Earlsmere Limited
Unit 18 Valley Road Jim White
Station Road Industrial Estate Managing Director
Wombwell, Barnsley, South Yorkshire, S73 OBS UK Date: 30th July 2014
Declare that the machine described below:
Make & Type Little Wonder Self-Propelled Lawn Vacuum
Category Lawn Vacuum
Model 5612-12-59
Engine Honda GX270
Speed 3600 RPM
Net installed power 6.3 kW (8.5 HP)
Complies with the provisions of the following European Directives and Amendments and the Regulations transpos-
ing it into national law.
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Noise in the Environment Directive 2000/14/EC
Vibration Directive 2002/44/EC
Non Road Emissions 2004/26/EC
Sound levels were determined in accordance with Directive 2000/14/EC (Annex V) and standards EN/ISO
3744:2010.
Sound:
Guaranteed Sound Power Level...............108dB Model 5612-12-59
Sound Pressure.........................................95dB Model 5612-12-59
Vibration:
Hand/arm vibration was measureed at the right and left operator handles as per ISO 5349-1-2001 and ISO
5349-2-2001. Only the highest of the left and right readings in given. Levels were calculated using ISO/SID
5395-1, in accordance with 2002/44/EC.
Guaranteed Vibration Level:.....................6.5 m/s² Model 5612-12-59
Intended Use and Limits:
This machine is intended for the vacuuming and collection of lawn and pavement debris.

SCHILLER GROUNDS CARE, INC.
ONE BOB-CAT LANE
P.O. BOX 469
JOHNSON CREEK, WI 53038
920-699-2000
www.schillergc.com ©Schiller Grounds Care, Inc. 2010
All Little Wonder Pro Vacuums are warranted against defects in material and workmanship for a period of two (2)
years from the date of purchase, under the following terms and conditions.
LITTLE WONDER will repair or replace, at its option, any part or parts of the product found to be defective in ma-
terial or workmanship during the warranty period. Warranty repairs and replacements will be made without charge
for parts or labor. All parts replaced under warranty will be considered as part of the original product, and any
warranty on the replaced parts will expire coincident with the original product warranty. If you think your LITTLE
WONDER Pro Vacuum is defective in material or workmanship, you must return it to a registered dealer with a
valid sales receipt or to our factory at 1028 Street Rd., Southampton, PA 18966. Transportation charges to ship
your product to us or a registered dealer must be borne by you.
Engines for all gasoline powered products are warranted separately by the engine manufacturer. Therefore, there
are no warranties made, expressed or implied, for engines for gasoline powered products by LITTLE WONDER.
LITTLE WONDER assumes no responsibility in the event that the product was not assembled or used in compli-
ance with any assembly, care, safety or operating instructions contained in the Operator’s Manual or information
accompanying the product. This limited warranty does not cover damages or defects due to normal wear and
tear, lack of reasonable and proper maintenance, failure to follow operating instructions or Operator’s Manual,
misuse, lack of proper storage or accidents, nor does it cover routine maintenance parts and service. This limited
warranty does not cover any defects due to repairs or alterations made to the product made by anyone other than
LITTLE WONDER or its registered dealers.
You must maintain your LITTLE WONDER Pro Vac by following the maintenance procedures described in the op-
erator’s manual. Such routine maintenance, whether performed by you or a registered dealer, is at your expense.
LITTLE WONDER MAKES NO EXPRESS OR IMPLIED WARRANTIES REPRESENTATIONS OR PROMISES
EXCEPT THOSE CONTAINED HEREIN. THERE ARE NO OTHER WARRANTIES, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALL WARRANTIES OTHER THAN
THE EXPRESS WARRANTY SET FORTH ABOVE ARE SPECIFICALLY DISCLAIMED. THE DURATION OF ANY
IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS
LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. LITTLE WONDER DISCLAIMS ALL
LIABILITY FOR INDIRECT, INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE
USE OF THE LITTLE WONDER PRO VACUUM PRODUCTS COVERED BY THIS WARRANTY. SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THAT ABOVE
LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
©2014 Schiller Grounds Care, Inc. All Rights Reserved.
2 YEAR LIMITED SERVICE AND
WARRANTY POLICY
FOR LITTLE WONDER PRO VAC AND PRO VAC SP
LITTLE WONDER
SCHILLER GROUNDS CARE, INC.
1028 STREET ROAD, P.O. BOX 38
SOUTHAMPTON, PA 18966
PHONE: [phone] • FAX: [phone]
877 - LWONDER
www.littlewonder.com
P/N 4170070 REV A