Living & Co COSTA NOVA DINING User manual

This icon in assembly instructions indicates
important notes that users should follow
during assembly
To reduce paper waste and protect the
environment,the instruction manual uses
less pages and is printed on recycled paper.
2-PERSON ASSEMBLY BEFORE
RETURNING
TO STORE
Read the manual
It will help you get the
best out of your product
Still have questions?
Call After Sales Support
0800 222 274
Warranty
We pride ourselves on producing a range
of quality products that are both packed with features and
completely reliable. We are so confident in our products, we back
them up with a two years warranty.
Now you too can relax knowing that you are covered.
Customer Helpline NZ: 0800 222 274
This product is covered by two years warranty
when accompanied by proof of purchase
COSTA NOVA DINING
INSTRUCTION MANUAL
Maximum weight for single chair is 110kg
Maximum weight for sofa is 250kg
Maximum weight for table is 50kg
“IMPORTANT RETAIN FOR FUTURE REFERENCE:READ CAREFULLY”
75cm
78cm
68cm
78cm
80cm
140cm
190cm
75cm
74cm

2Person of Assembly
Semi-tighten each bolt during assembly; ensure all bolts are tightened
when fully assembled
Always place the product on a flat, steady and stable surface
FLOOR AREA
3.0M x 2.0M
1. Please check that all parts are present before you start the assembly
of your furniture.
2. For ease and speed of assembly, we recommend that before you
commence each step of the assembly, that you identify all the
parts required for that step.
3. For larger items, please ensure that you have sufficient space and
people(as indicated on page 1)to assemble your product safely.
4. We recommend that, where possible, all items are assembled near
to the area in which they will be placed in use, to avoid moving the
product unnecessarily once assembled.
5. For the protection of your furniture, we recommend that the product is
placed on a protected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as
this may damage the product. Do not use power tools.
7. Always place the product on a flat, steady and stable surface.
8. Do not stand on the product. Do not use the product as a stepladder.
9. For domestic use.
10. Please use caution and care when lifting the product to avoid personal
injury and/or product damage.
Required Assembly Space

WICKER CARE INSTRUCTIONS
CUSHION CARE INSTRUCTIONS
· Our cushions contain a UV treatment to protect them against dete
rioration.Some fading will occur over time.
·To clean cushions wash with mild soapy water and rinse thoroughly
with fresh water.
· To avoid stains,remove spills promptly.
· Do not use solvent type cleaners.
· Do not machine wash,dryclean or tumble dry.
· Never store cushions when wet.
· We recommend that all cushions are stored inside to extend their life.
· To clean wicker,wash down regularly with mild soapy water
and rinse with fresh water.Hose regularly with fresh water to
remove airborne contaminants.
·Our wicker style furniture and cushions contain a UV coating
to protect against deterioration.Some fading will occur over
time.When it is cold,the weave may become stiffer than
normal.When hot,the weave will become more elastic.Wicker
style furniture will revert to its normal elasticity,once the
temperature stabilises.
· We recommend storing undercover and using furniture covers
when not in use and for protection during the winter months.

GLASS CARE INSTRUCTIONS
· The glass used in our current table range is known as
tempered glass.Although it is up to four times tougher than
regular glass,it is not unbreakable.
· Tempered glass should be cared for like normal glass.
· Damaged glass may spontaneously shatter if subjected to
thermal or mechanical stress.
· Avoid dropping objects on the glass.
· Do not allow hard or pointed objects to come into contact.
· Use mats and coasters to protect glass from sudden
heat change.

I
S
3935

Align all fixings 80%and
tighten 100%
Repeat process x2

Repeat process x2
Align all fixings 80%and
tighten 100%
please ensure correnct
orientation of part B

Repeat process x2
Align all fixings 80%and
tighten 100%
please ensure correnct
orientation of part A

I
Repeat process x2

Align all fixings 80%and
tighten 100%