Living Spaces Sortino 288032 User manual

Date:
288032
ASSEMBLY INSTRUCTIONS
3/20/2020
Page 1 / 8
Sortino Power Recliner with 1 Table

·
·
·
·
·
·
·
·
·
·
Assembly Instructions
Care & Maintenance
Date:
PART # QTY
IMPORTANT SAFETY INSTRUCTIONS:
Keep small parts and hardware out of the reach of children.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
intergrity of the item.
Read all instructions carefully before unpacking assembly parts. Sharp, exposed staple tips can cause injury. For
your protection, please remove any exposed staples used in packing.
3/20/2020
Page 2 / 8
PRE-ASSEMBLY INSTRUCTIONS:
To avoid accidentally discarding small parts or hardware, please do not dispose of any contents until assembly is
complete.
Do not over-tighten screws or bolts.
PARTS LIST
PICTURE
PART DISCRIPTION
Intended for residential use only.
Page 3
Pages 8
Keep instructions for future use.
For your safety, assembly by two or more adults is recommended.
Pages 7
Pages 4~6
TABLE OF CONTENTS
Parts List
Warnings
Remove all parts and hardware from the box and place them on a carpeted or scratch-free work surface.
Prior to starting assembly, use the parts and hardware lists to identify and separate each of the pieces included.

A1
B1
C1
D
E
F
G
Date:
Back Cushion
Seat Cushion
AC Power Cord
STEPS
Step 1: Slide the KD back into the steel mechanism posts in the base of
of the furniture.
Step 2: Press both sides of the back firmly into place.The back
automatically locks into place.
3/20/2020
Page 3 / 8
Thank you for your purchase. Be sure to check all packing material carefully for small parts which may have come
loose inside the carton during shipment. Identify and count all parts and compare with the parts and hardware
lists.

Date:
STEPS
Step 3: Attach the outside back along the bottom rear of the base frame
with pre-attached velcro.
3/20/2020
Page 4 / 8
Step 1: Slide the KD back into the steel mechanism posts in the base of
of the furniture.
Step 2: Press both sides of the back firmly into place.The back
automatically locks into place.

Date:
Step 3: Attach the outside back along the bottom rear of the base frame
with pre-attached velcro.
3/20/2020
Page 5 / 8
STEPS
Step 4: Connect the AC power cord to the main switch behind the arm,
and finally connect the cord with a power source.

Date:
Leather Care Tips
·
·
·
·
Step 4: Connect the AC power cord to the main switch behind the arm,
and finally connect the cord with a power source.
3/20/2020
Page 6 / 8
CARE & MAINTENANCE
Fabric can fade when exposed to direct sunlight over a long period of time.
To minimize fading, avoid placing your furniture in direct sunlight.
Avoid cleaners which use chemical products. Many of these are harsh and not safe for use on upholstery.
Stress to the fabric may result in tears and when stretched, upholstery may not completely return to its original shape.

·
·
·
Date:
·
·
·
·
·
·
If pillow cushions are sewn to the frame, any pulling or tugging may result in a tear.
Avoid sitting in one area and use the seating areas evenly for even wear.
Leather and fabric are not resistant to animals. Allowing pets on your upholstered furniture is not recommended.
Use this product for intended purpose only.
Intended for residential use only.
WARNING
Do not use this product unless all screws and bolts are securely tightened.
Check that all screws and bolts are secure every three months or as needed
Do not use this product as a stepladder.
3/20/2020
Page 7 / 8
Dispose of packing material properly. Do not use plastic cover as head covering as it may cause suffocation.

Date:
3/20/2020
Page 8 / 8