Living Spaces GINGER 8011 3S User manual

Before Assembling The Products
Please read carefully the instructions prior to assembling the
product.
When you have finished assembling the product, please
place it on a flat surface and make sure it is stable before use.
①When you open the package with a sharp tool like a
cutter knife, be careful not to damage the components
inside.
②Choose a clean, level, spacious assembly area. Avoid
hard surfaces that may damage the product.
③Take care when lifting. Please assemble the product in
close proximity to where you intend to position the
item.
④Ensure that you have all required contents for complete
assembly.
⑤Keep all hardware parts and packaging out of reach of
small children.
⑥Do not over tighten the screws and bolts as this may
damage the threads.
Assembly Instruction
Additional tools
required Allow 20 minutes 2 people required
Always test cleaners on an inconspicuous area before use.
Do not saturate the upholstery or the filling with water or
other cleaning fluids.
Care and Maintenance
Regular Care
Protect from direct sunlight and direct heat. Vacuum
regularly using low suction and soft brush accessory. Avoid
heavy soiling caused by perspiration, hair oil, footwear and
pets. Always remember that a little love and care for
furniture will repay itself many times over.
Cleaning
DO NOT REMOVE ANY PARTS FOR SEPARATE CLEANING.
Professional cleaning recommended. Do not use dishwashing
or laundry detergents. Use only professional cleaning
products. Pay careful attention to armrests, headrests and
cushions. Do not wet filling. Dry in shade away from direct
heat and sunlight. Allow to dry thoroughly before re-use.
ALTERNATIVELY seek professional cleaning only. Upholstery
cleaner is most effective for cleaning general soiling, protein
or water based stains. Do not scrub upholstery with stiff
brushes.
Spot Cleaning
Treat spills and stains as soon as possible. Gently scrape any
soil or mop any liquid from the surface of the fabric. Do not
scrub. Apply cleaning agents strictly according to instructions.
8011 3S GINGER SOFA

①Sofa Legs X4
②Allen key X1
③Bolt X8
④Small screw X16
⑤Surport leg X1
Parts List
Assembly is complete
Step 2 –Installation the Sofa Legs
Assembling
Step 1 - Find the Legs in the bag attached outside of the
packing
Assembly Instructions AS-8011 3S
3
1
5
1
1
1
1
42
44
4
3
5