Living Spaces TLC LSPHPZ23001 User manual

CODE PRICING NOTES
6300 Right Arm
6310 Left Arm
6320 Seat Cushion
6330 Back Cushion
6340 Stretcher
6345
6300
6310
6320
6330
6340
6345
6350
6355
6360
6365
6370
6375
Hardware
as below
Pre-assembly:
*12
Wooden Plug
Remove all parts and hardware from box along with any plastic protective
packaging.
Please carefully read all instructions before assembling the chair.
For your safety and inconvenience, assembly by two or more
adults is recommended.
Keep instructions for future use.
Important Safty Instructions:
Do not discard any contents until after assembly is complete to avoid
accidentally discarding small parts or hardware.
Big Flat Washer
*6
Small Flat Washer
Bolt
*12
Lock washer 1/4
Seat Cushion
*1
Back Cushion
*1
*6
STEP 1: Assemble the chair on a flat, soft surface such as a carpet or cloth to prevent scratching the
finish. Open the bottom covering, then attach right arm (6300) to seat cushion (6320) using bolt (6350),
lock washer (6355) and big flat washer (6360).
Right Arm
*1
Left Arm
*1
Hardware
Hardware(Including Bolt & Lock washer 1/4 & Big Flat Washer & Small Flat
Washer & Allen Wrench 1/4 & Wooden Plug)
NO
1 Set
Vendor Collection: KENDRICK II
PART #
DESCRIPTION
SHIPS IN 48 HRS
QUANTITY
Left Arm
Vendor Information
Living Space Information
Vendor Name:
TLC
LS SKU: 320368
Vendor Code:
LSPHPZ23001
LS Product Name: KENDRICK II STONE ACCENT CHAIR
Vendor Model #: LSPHPZ23001
Stretcher
*1
Right Arm
NO
1
Seat Cushion
NO
1
NO
1
STEP 3: Attach left arm (6310) to back cushion (6330), seat cushion (6320) and stretcher (6340) using
bolt (6350), lock washer (6355)and small flat washer (6365) according to the label "L" on the left arm
(6310), seat cushion (6320) and stretcher (6340). Loosely tighten small flat Allen wrench (6370).
Back Cushion
NO
1
Allen Wrench 1/4
*1
Stretcher
NO
1
*6
STEP 2: Attach right arm (6300) to back cushion (6330) and stretcher (6340) using bolt (6350), lock
washer (6355) and small flat washer (6365) according to the label "R" on the right arm (6300), seat
cushion (6320) and back cushion (6330). Loosely tighten by Allen wrench (6370).

ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE PERIODICALLY
INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL HARDWARE IS KEPT
TIGHTENED.
Thank you for your purchase！
STEP 6: Assembly are complete. Failure to follow these instructions may cause the bolts to misalign
during assembly.
STEP5: Turn the assembled chair to a upright position. Securely tighten all bolts by Allen wrench
(6370), but do not overtighten the bolts. Then attach wooden plug (6375) to each bolt hole, tighten with
rubber hammer to knock the wooden plug till its tichten. Note: use a soft cloth between the wooden plug
and hammer to prevent damage to wooden plug finish.
STEP 4: Attach seat cushion (6320) to left arm (6310) using bolt (6350),
lock washer (6355) and big flat washer (6360). Loosely tighten by Allen
wrench (6370).