
Instruction manual
7
At this moment you can start to vacuum food:
Note: if you use plastic bag, you do not have to respect the stages above
1. Put plastic bag wit t e food in t e sealing groove (food s all not be more t an t ree-quarters of
t e plastic bag).
2. Press mode button (“aliments secs/aliments umides”) once to c oose dry (blue lig t) or twice
wet function (red lig t), it depends on your food (biscuit or bread is dry food, fis or meat is wet
food).
Note:
•It is recommended to use the continuous device during no more than 20 seconds.
•For t e ig temperature food packaging, to prevent burns, please cool down after t e
packaging.
•The part where you want to seal the bag owes remained clean and exempt from food.
Also watch not to wrinkle the bag
•If you want to put t e vacuum-packed food in a microwave, must first punc a ole in t e
plastic bag.
•After-party vacuum packaging of food, placed in t e refrigerated immediately or froze it.
•Liquid food, it must not be vacuum packed wit plastic bag, only need to be sealed.
3. Press t e vacuum seal button (“mise sous vide et scellage”): suitable for food w ic need large
suction force suc as cereal.
Or soft seal button (“aliments fragiles”): suitable for food w ic is lower vacuum degree suc as
bread.
Cover is lowered automatically. T e vacuum pump is running, t e air inside t e bag will be
disc arged to t e outside. Sealing progress lig t bar allows you to follow t e bag sealing.
Note: if you want to stop running, please press stop button. If any dysfunction during vacuum process,
you ave just to unplug appliance and try again.
4. Once t e vacuum is complete, t e green lig t turns red, t e sealing function automatically
activates.
5. After sealing, cover is opened and you can remove t e vacuum-packed bags.
External vacuum (button “mise sous vide externe”):
1. To vacuum t e food in vacuum canister (not supplied): you ave to use supplied vacuum tube
and adaptor wit DOM420. You can fix supplied adaptor on specific ole on appliance side and
t e ot er part supplied wit your canister ave to be fix on t e canister.
2. You can press external vacuum button.